Skip to contentSkip to conversation

Honour ALUA preference indicator

PATCH New Colin Watson 1 participant 1 message Feb 12, 2010 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Honour ALUA preference indicator

SPC defines the preference indicator (bit 7 of the first byte returned by REPORT TARGET PORT GROUPS) as indicating a preferred primary target port group, and says that applications may use it to influence path selection. Choose TPGs with this bit set over TPGs with it unset.

This fixes failback handling with the Intel Modular Server.

---
 libmultipath/prioritizers/alua.c      |   12 ++++++++++--
 libmultipath/prioritizers/alua_spc3.h |    2 +-
 2 files changed, 11 insertions(+), 3 deletions(-)
libmultipath/prioritizers/alua.c +10 -2
index 0048a44..abf6232 100644
@@ -37,6 +37,7 @@ get_alua_info(int fd)
 	};
 	int	rc;
 	int	tpg;
+	int	aas;
 
 	rc = get_target_port_group_support(fd);
 	if (rc < 0)
@@ -53,22 +54,27 @@ get_alua_info(int fd)
 	rc = get_asymmetric_access_state(fd, tpg);
 	if (rc < 0)
 		return -ALUA_PRIO_GETAAS_FAILED;
+	aas = (rc & 0x0f);
 
 	condlog(3, "aas = [%s]",
-		(rc < 4) ? aas_string[rc] : "invalid/reserved");
+		(aas < 4) ? aas_string[aas] : "invalid/reserved");
 	return rc;
 }
 
 int getprio (struct path * pp)
 {
 	int rc;
+	int aas;
+	int priopath;
 
 	if (pp->fd < 0)
 		return -ALUA_PRIO_NO_INFORMATION;
 
 	rc = get_alua_info(pp->fd);
 	if (rc >= 0) {
-		switch(rc) {
+		aas = (rc & 0x0f);
+		priopath = (rc & 0x80);
+		switch(aas) {
 			case AAS_OPTIMIZED:
 				rc = 50;
 				break;
@@ -81,6 +87,8 @@ int getprio (struct path * pp)
 			default:
 				rc = 0;
 		}
+		if (priopath)
+			rc += 80;
 	} else {
 		switch(-rc) {
 			case ALUA_PRIO_NOT_SUPPORTED:
libmultipath/prioritizers/alua_spc3.h +1 -1
index bddbbdd..4bbdded 100644
@@ -299,7 +299,7 @@ struct rtpg_tpg_dscr {
 static inline int
 rtpg_tpg_dscr_get_aas(struct rtpg_tpg_dscr *d)
 {
-	return (d->b0 & 0x0f);
+	return (d->b0 & 0x8f);
 }
 
 struct rtpg_data {