idr: fix a critical misallocation bug, take#2
Subsystems (2)
PATCH 1/1 idr: fix a critical misallocation bug, take#2
This is retry of reverted 859ddf09743a8cc680af33f7259ccd0fd36bfe9d which contained two bugs.
* pa[idp->layers] should be cleared even if it's not used by sub_alloc() because it's used by mark idr_mark_full().
* The original condition check also assigned pa[l] to p which the new code didn't do thus leaving p pointing at the wrong layer.
Both problems have been fixed and the idr code has received good amount testing using userland testing setup where simple bitmap allocator is run parallel to verify the result of idr allocation.
The bug this patch fixes is caused by sub_alloc() optimization path bypassing out-of-room condition check and restarting allocation loop with starting value higher than maximum allowed value. For detailed description, please read commit message of 859ddf09.
Based-on-patch-from: Eric Paris <[email protected]>
---
Heh... Embarrassingly, it turns out Eric's original patch is correct and all I did was adding two mistakes. :-) I'm pretty sure this is the correct fix and have tested it quite extensively. But, given the fragility of this thing, Andrew, can you please put it in your tree and push it after 2.6.33 merge window opens? Greg, please don't put this into -stable until at least 2.6.33-rc2 seems okay.
Thank you.
lib/idr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
lib/idr.c +3 -1
@@ -156,10 +156,12 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = (id | ((1 << (IDR_BITS * l)) -1 )) +1 ;/* if already at the top layer, we need to grow */ -if (!(p = pa[l])) { +if (id >=1 << (idp->layers *IDR_BITS )) { *starting_id = id;return IDR_NEED_TO_GROW ; } + p = pa[l]; +BUG_ON (!p);/* If we need to go up one layer, continue the * loop; otherwise, restart from the top.
Quoted 18 lines · Tejun Heo
This is retry of reverted
859ddf09743a8cc680af33f7259ccd0fd36bfe9dwhich contained two bugs.* pa[idp->layers] should be cleared even if it's not used by
sub_alloc()because it's used by markidr_mark_full().* The original condition check also assigned pa[l] to p which the new code didn't do thus leaving p pointing at the wrong layer.
Both problems have been fixed and the idr code has received good amount testing using userland testing setup where simple bitmap allocator is run parallel to verify the result of idr allocation.
The bug this patch fixes is caused by
sub_alloc()optimization path bypassing out-of-room condition check and restarting allocation loop with starting value higher than maximum allowed value. For detailed description, please read commit message of859ddf09.
Quoted 4 lines
Signed-off-by Tejun Heo <[email protected]>Based-on-patch-from: Eric Paris <[email protected]>
Reported-by Eric Paris <[email protected]>
Full LTP still running, but this passes semget05 which is what crashed the last version. So that's
Quoted 31 lines
---
Heh... Embarrassingly, it turns out Eric's original patch is correct and all I did was adding two mistakes. :-) I'm pretty sure this is the correct fix and have tested it quite extensively. But, given the fragility of this thing, Andrew, can you please put it in your tree and push it after 2.6.33 merge window opens? Greg, please don't put this into -stable until at least 2.6.33-rc2 seems okay.Thank you.
lib/idr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)lib/idr.c +3
-1@@ -156,10 +156,12 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa) id = (id | ((1 << (IDR_BITS * l)) -1 )) +1 ;/* if already at the top layer, we need to grow */ -if (!(p = pa[l])) { +if (id >=1 << (idp->layers *IDR_BITS )) { *starting_id = id;return IDR_NEED_TO_GROW ; } + p = pa[l]; +BUG_ON (!p);/* If we need to go up one layer, continue the * loop; otherwise, restart from the top.