be2net: set proper value to version field in req hdr
Subsystems (2)
PATCH 1/1 be2net: set proper value to version field in req hdr
Before sending a command to the ASIC, set version properly. This is necessary for the ARM firmware to send correct data to the driver. This also fixes a bug in certain skews of the ASIC where the statistics are misreported.
Signed-off-by Ajit Khaparde <[email protected]>
--- drivers/net/benet/be_cmds.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/net/benet/be_cmds.c +1 -0
@@ -296,6 +296,7 @@ static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, req_hdr->opcode = opcode; req_hdr->subsystem = subsystem; req_hdr->request_length =cpu_to_le32 (cmd_len -sizeof (*req_hdr)); + req_hdr->version =0 ; } static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
Signature · 1 line
1.6.3.3
From: Ajit Khaparde <[email protected]>
Date: Tue, 16 Feb 2010 15:48:46 +0530
Quoted 6 lines
Before sending a command to the ASIC, set version properly. This is necessary for the ARM firmware to send correct data to the driver. This also fixes a bug in certain skews of the ASIC where the statistics are misreported.
Signed-off-by Ajit Khaparde <[email protected]>
Applied.