Skip to contentSkip to conversation

add mx3 cupid bsp with added to uncompress.h and against mxc-master

PATCH New Carsten Behling 2 participants 2 messages Feb 17, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 add mx3 cupid bsp with added to uncompress.h and against mxc-master

Hi,

I removed the obsolete Macros and added the board to uncompress.h.

This patch is against mxc-master.

Carsten

---
 arch/arm/mach-mx3/Kconfig                   |    8 +
 arch/arm/mach-mx3/Makefile                  |    1 +
 arch/arm/mach-mx3/cupid.c                   |  186 +++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/uncompress.h |    1 +
 4 files changed, 196 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mx3/cupid.c
arch/arm/mach-mx3/Kconfig +8 -0
index 3872af1..0f67a0b 100644
@@ -114,4 +114,12 @@ config MACH_KZM_ARM11_01
          Include support for KZM-ARM11-01. This includes specific
          configurations for the board and its peripherals.
 
+config MACH_GUF_CUPID
+       bool "Support Garz & Fricke Cupid platform"
+       select ARCH_MX35
+       default n
+       help
+         Include support for Cupid platform. This includes specific
+         configurations for the board and its peripherals.
+
 endif
arch/arm/mach-mx3/Makefile +1 -0
index 5d650fd..3576273 100644
@@ -24,3 +24,4 @@ obj-$(CONFIG_MACH_PCM043)     += mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)    += mach-mx35pdk.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)        += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_GUF_CUPID)   += cupid.o
arch/arm/mach-mx3/cupid.c new file +186 -0

186 lines not on this page · raw message

arch/arm/plat-mxc/include/mach/uncompress.h +1 -0
index d189f00..1a0b311 100644
@@ -94,6 +94,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
        case MACH_TYPE_MX35_3DS:
        case MACH_TYPE_PCM043:
        case MACH_TYPE_LILLY1131:
+       case MACH_TYPE_GUF_CUPID:
                uart_base = MX3X_UART1_BASE_ADDR;
                break;
        case MACH_TYPE_MAGX_ZN5:

--
1.6.0.2

#1 lore raw

PATCH 1/1 add mx3 cupid bsp with added to uncompress.h and against mxc-master

Hello,

Quoted 1 line · Carsten Behling

I removed the obsolete Macros and added the board to uncompress.h.

and what about the other things pointed out?

Best regards
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |