add mx3 cupid bsp cleanup
Subsystems (3)
PATCH 1/2 add mx3 cupid bsp cleanup
Hi,
this is the cleaned up patch for the CUPID BSP.
Carsten
Signed-off-by Carsten Behling <[email protected]>
--- arch/arm/mach-mx3/Kconfig | 7 + arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/mach-guf_cupid.c | 184 ++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/board-guf_cupid.h | 24 +++ 4 files changed, 216 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx3/mach-guf_cupid.c create mode 100644 arch/arm/plat-mxc/include/mach/board-guf_cupid.h
arch/arm/mach-mx3/Kconfig +7 -0
@@ -114,4 +114,11 @@ config MACH_KZM_ARM11_01 Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_GUF_CUPID + bool "Support Garz & Fricke Cupid platform" + select ARCH_MX35 + help + Include support for Cupid platform. This includes specific + configurations for the board and its peripherals. + endif
arch/arm/mach-mx3/Makefile +1 -0
@@ -24,3 +24,4 @@ obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_GUF_CUPID) += mach-guf_cupid.o
arch/arm/mach-mx3/mach-guf_cupid.c new file +184 -0
184 lines not on this page · raw message
arch/arm/plat-mxc/include/mach/board-guf_cupid.h new file +24 -0
@@ -0,0 +1,24 @@ +/* +* Copyright 2010 Garz & Fricke GmbH All Rights Reserved. +* +* Author: Carsten Behling <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA +*/ + +#ifndef __MACH_BOARD_GUF_CUPID_H__ +#define __MACH_BOARD_GUF_CUPID_H__ + +#endif /* __MACH_BOARD_GUF_CUPID_H__ */
--
1.6.0.2
Signed-off-by Carsten Behling <[email protected]>
--- arch/arm/mach-mx3/Kconfig | 7 ++++++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/plat-mxc/include/mach/board-guf_cupid.h | 24 ++++++++++++++++++++++ 3 files changed, 32 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-mxc/include/mach/board-guf_cupid.h
arch/arm/mach-mx3/Kconfig +7 -0
@@ -114,4 +114,11 @@ config MACH_KZM_ARM11_01 Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_GUF_CUPID + bool "Support Garz & Fricke Cupid platform" + select ARCH_MX35 + help + Include support for Cupid platform. This includes specific + configurations for the board and its peripherals. + endif
arch/arm/mach-mx3/Makefile +1 -0
@@ -24,3 +24,4 @@ obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_GUF_CUPID) += mach-guf_cupid.o
arch/arm/plat-mxc/include/mach/board-guf_cupid.h new file +24 -0
@@ -0,0 +1,24 @@ +/* +* Copyright 2010 Garz & Fricke GmbH All Rights Reserved. +* +* Author: Carsten Behling <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA +*/ + +#ifndef __MACH_BOARD_GUF_CUPID_H__ +#define __MACH_BOARD_GUF_CUPID_H__ + +#endif /* __MACH_BOARD_GUF_CUPID_H__ */
--
1.6.0.2
PATCH 1/2 add mx3 cupid bsp cleanup
On Wed, Feb 17, 2010 at 05:54:53PM +0100, Carsten Behling wrote:
[...]
Quoted 20 lines
arch/arm/plat-mxc/include/mach/board-guf_cupid.h new file +14
-0@@ -0,0 +1,24 @@ +/* +* Copyright 2010 Garz & Fricke GmbH All Rights Reserved. +* +* Author: Carsten Behling <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details.
arch/arm/plat-mxc/include/mach/board-guf_cupid.h line 24
Quoted 10 lines
arch/arm/plat-mxc/include/mach/board-guf_cupid.h new file +10
-0+* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA +*/ + +#ifndef __MACH_BOARD_GUF_CUPID_H__ +#define __MACH_BOARD_GUF_CUPID_H__ + +#endif /* __MACH_BOARD_GUF_CUPID_H__ */
Unless you plan to fill that file with live at some later point, you should remove it.
Quoted 7 lines
Signed-off-by Carsten Behling <[email protected]>--- arch/arm/mach-mx3/Kconfig | 7 ++++++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/plat-mxc/include/mach/board-guf_cupid.h | 24 ++++++++++++++++++++++ 3 files changed, 32 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-mxc/include/mach/board-guf_cupid.h
And what's that second patch about?
Daniel
Quoted 59 lines
arch/arm/mach-mx3/Kconfig +7
-0@@ -114,4 +114,11 @@ config MACH_KZM_ARM11_01 Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_GUF_CUPID + bool "Support Garz & Fricke Cupid platform" + select ARCH_MX35 + help + Include support for Cupid platform. This includes specific + configurations for the board and its peripherals. + endifarch/arm/mach-mx3/Makefile +1
-0@@ -24,3 +24,4 @@ obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_GUF_CUPID) += mach-guf_cupid.oarch/arm/plat-mxc/include/mach/board-guf_cupid.h new file +24
-1@@ -0,0 +1,24 @@ +/* +* Copyright 2010 Garz & Fricke GmbH All Rights Reserved. +* +* Author: Carsten Behling <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA +*/ + +#ifndef __MACH_BOARD_GUF_CUPID_H__ +#define __MACH_BOARD_GUF_CUPID_H__ + +#endif /* __MACH_BOARD_GUF_CUPID_H__ */ --1.6.0.2
PATCH 1/2 add mx3 cupid bsp cleanup
In reply to Carsten BehlingHello,
I wouldn't split the patch.
Quoted 5 lines · Carsten Behling
Hi,
this is the cleaned up patch for the CUPID BSP.
Carsten
This isn't a message suitable to go into git. You can write such things after the triple-dash below you S-o-b.
Also please remove "cleanup" from the Subject.
Quoted 3 lines
Signed-off-by Carsten Behling <[email protected]>---
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |