Skip to contentSkip to conversation

Debian on the ASUS EeePC 1005PE

Debian-eeepc-devel Alan Jenkins 3 participants 3 messages Feb 19, 2010 – Feb 20, 2010 1 message not in the archive ACPI

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 6 lines · Ansgar Burchardt

Hi,

I got an ASUS EeePC 1005PE a few days ago and am trying to install Debian testing on it.

There have been several problems so far:

<snip>

Quoted 11 lines

2. The Ethernet card disappeared completely. It did no longer show up in the output from lspci, nor was it accessible in Windows. This problem persisted over shutdowns as well. Removing the battery and disconnecting the power supply luckily made the card show up again.

A patch was available for this issue on a different EeePC model [3]. This one was not so easy to backport, so I just changed it to disable hot-plug always (patch attached). This solved this issue for me: the Ethernet card does no longer disappear.

[3] http://bugzilla.kernel.org/show_bug.cgi?id=14570

My suggestion for this problem would be to contact the eeepc-laptop maintainer :-).

I guess we're too late to add a blacklist entry for 2.6.33, but we should be able to get a fix into 2.6.33.1.

Please confirm that the wireless toggle key (possibly fn+f2) works correctly for you after disabling hotplug. That is, it doesn't break if you disable the wireless and enable it again (and you don't see anything too scary in the kernel log).

Thanks
Alan

#2 lore raw
Quoted 20 lines · Alan Jenkins
Quoted 6 lines · Ansgar Burchardt

Hi,

I got an ASUS EeePC 1005PE a few days ago and am trying to install Debian testing on it.

There have been several problems so far:

<snip>

Quoted 10 lines

2. The Ethernet card disappeared completely. It did no longer show up in the output from lspci, nor was it accessible in Windows. This problem persisted over shutdowns as well. Removing the battery and disconnecting the power supply luckily made the card show up again.

A patch was available for this issue on a different EeePC model [3]. This one was not so easy to backport, so I just changed it to disable hot-plug always (patch attached). This solved this issue for me: the Ethernet card does no longer disappear.

Quoted 7 lines
Quoted 1 line

[3] http://bugzilla.kernel.org/show_bug.cgi?id=14570

My suggestion for this problem would be to contact the eeepc-laptop maintainer :-).

I guess we're too late to add a blacklist entry for 2.6.33, but we should be able to get a fix into 2.6.33.1.

I think blacklist addition should be fine even for .33.

Thanks.

Signature · 1 line
Dmitry
#3 lore raw
In reply to Alan Jenkins

Hi,

Quoted 18 lines · Alan Jenkins
Quoted 2 lines

I got an ASUS EeePC 1005PE a few days ago and am trying to install Debian testing on it.

<snip>

Quoted 11 lines

2. The Ethernet card disappeared completely. It did no longer show up in the output from lspci, nor was it accessible in Windows. This problem persisted over shutdowns as well. Removing the battery and disconnecting the power supply luckily made the card show up again.

A patch was available for this issue on a different EeePC model [3]. This one was not so easy to backport, so I just changed it to disable hot-plug always (patch attached). This solved this issue for me: the Ethernet card does no longer disappear.

[3] http://bugzilla.kernel.org/show_bug.cgi?id=14570

My suggestion for this problem would be to contact the eeepc-laptop maintainer :-).

Quoted 7 lines

I guess we're too late to add a blacklist entry for 2.6.33, but we should be able to get a fix into 2.6.33.1.

Please confirm that the wireless toggle key (possibly fn+f2) works correctly for you after disabling hotplug. That is, it doesn't break if you disable the wireless and enable it again (and you don't see anything too scary in the kernel log).

After finally managing to set up hostapd, I can confirm that this works. I disabled the wireless interface using [Fn]+[F2], then enabled it again. After restarting hostapd, I was able to connect to use the wireless network again.

The kernel log contains nothing scary (only a boring "wlan0: no IPv6 routers present").

Regards,
Ansgar