mac80211: give warning if building w/out rate ctrl algorithm
PATCH RESEND 1/1 mac80211: give warning if building w/out rate ctrl algorithm
I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack and drivers w/ no rate control algorithm. For drivers like RTL8187 that don't supply their own RC algorithms, this will cause ieee80211_register_hw to fail (making the driver unusable).
This will tell kconfig to provide a warning if no rate control algorithms have been selected. That'll at least warn the user; users that know that their drivers supply a rate control algorithm can safely ignore the warning, and those who don't know (or who expect to be using multiple drivers) can select a default RC algorithm.
Signed-off-by Andres Salomon <[email protected]>
--- net/mac80211/Kconfig | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
net/mac80211/Kconfig +9 -0
@@ -15,8 +15,12 @@ comment "CFG80211 needs to be enabled for MAC80211" if MAC80211 != n +config MAC80211_HAS_RC + def_bool n + config MAC80211_RC_PID bool "PID controller based rate control algorithm" if EMBEDDED + select MAC80211_HAS_RC ---help--- This option enables a TX rate control algorithm for mac80211 that uses a PID controller to select the TX
@@ -24,12 +28,14 @@ config MAC80211_RC_PID config MAC80211_RC_MINSTREL bool "Minstrel" if EMBEDDED + select MAC80211_HAS_RC default y ---help--- This option enables the 'minstrel' TX rate control algorithm choice prompt "Default rate control algorithm" + depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL ---help--- This option selects the default rate control algorithm
@@ -62,6 +68,9 @@ config MAC80211_RC_DEFAULT endif +comment "some wireless drivers require a rate control algorithm" + depends on MAC80211_HAS_RC=n + config MAC80211_MESH bool "Enable mac80211 mesh networking (pre-802.11s) support" depends on MAC80211 && EXPERIMENTAL
Signature · 1 line
1.5.6.5