powerpc/mpc512x: Add gpio driver
Subsystems (2)
PATCH v2 1/1 powerpc/mpc512x: Add gpio driver
This patch adds a gpio driver for MPC512X PowerPCs.
It has been tested on our CAN-CBX-CPU5201 module that uses a MPC5121 CPU. This platform comes with a couple of LEDs and configuration switches that have been used for testing.
Signed-off-by Matthias Fuchs <[email protected]>
---
v2: - move driver to arch/powerpc/platforms/512x directory
- Kconfig changes are now in arch/powerpc/platform/512x/Kconfig
- put struct mpc512x_gpio_regs in driver's .c file
- rename GPIO_MASK into MPC512x_GPIO_MASK
- use shadow registers instead of r/m/w-operations
- don't use arch_initcall but call mpc512x_add_gpiochips() from mpc512x platform setup code.
arch/powerpc/platforms/512x/Kconfig | 9 ++ arch/powerpc/platforms/512x/Makefile | 1 + arch/powerpc/platforms/512x/mpc512x.h | 3 + arch/powerpc/platforms/512x/mpc512x_gpio.c | 198 ++++++++++++++++++++++++++ arch/powerpc/platforms/512x/mpc512x_shared.c | 3 + 5 files changed, 214 insertions(+), 0 deletions(-) create mode 100644 arch/powerpc/platforms/512x/mpc512x_gpio.c
arch/powerpc/platforms/512x/Kconfig +9 -0
@@ -10,6 +10,15 @@ config PPC_MPC5121 bool select PPC_MPC512x +config MPC512x_GPIO + bool "MPC512x GPIO support" + depends on PPC_MPC512x + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + MPC512x GPIOs. + config MPC5121_ADS bool "Freescale MPC5121E ADS" depends on 6xx
arch/powerpc/platforms/512x/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_MPC512x_GPIO) += mpc512x_gpio.o
arch/powerpc/platforms/512x/mpc512x.h +3 -0
@@ -16,4 +16,7 @@ extern void __init mpc512x_init(void);extern int __init mpc5121_clk_init (void );void __init mpc512x_declare_of_platform_devices (void );extern void mpc512x_restart (char *cmd); +#ifdef CONFIG_MPC512x_GPIO +extern int __init mpc512x_add_gpiochips (void ); +#endif #endif /* __MPC512X_H__ */
arch/powerpc/platforms/512x/mpc512x_gpio.c new file +198 -0
198 lines not on this page · raw message
arch/powerpc/platforms/512x/mpc512x_shared.c +3 -0
@@ -100,4 +100,7 @@ void __init mpc512x_init(void)mpc512x_declare_of_platform_devices ();mpc5121_clk_init ();mpc512x_restart_init (); +#ifdef CONFIG_MPC512x_GPIO +mpc512x_add_gpiochips (); +#endif }
Signature · 1 line
1.6.1