Skip to contentSkip to conversation

ARM: mach-shmobile: add INTCS macros

PATCH New Magnus Damm 4 participants 9 messages Mar 11, 2010 – Apr 7, 2010 1 message not in the archive

Subsystems (6)
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: mach-shmobile: add INTCS macros

From: Magnus Damm <[email protected]>

Add SH-Mobile ARM INTCS macros for the INTCS controller.

---

No special dependencies.

 arch/arm/mach-shmobile/include/mach/irqs.h |    6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/mach-shmobile/include/mach/irqs.h +6 -0
@@ -4,7 +4,13 @@
 #define NR_IRQS         512
 #define NR_IRQS_LEGACY  8
 
+/* INTCA */
 #define evt2irq(evt)		(((evt) >> 5) - 16)
 #define irq2evt(irq)		(((irq) + 16) << 5)
 
+/* INTCS */
+#define INTCS_VECT_BASE		0x3400
+#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
+
 #endif /* __ASM_MACH_IRQS_H */
author maintainer
#1 lore raw

PATCH 1/1 ARM: mach-shmobile: sh7367 INTCS support

From: Magnus Damm <[email protected]>

Add support for the sh7367 INTCS interrupt controller.

INTCS is the interrupt controller for the sh7367 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor.

INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller.

---

Depends on:
"[PATCH] ARM: mach-shmobile: add INTCS macros" "[PATCH] sh: INTC ioremap support V2"

 arch/arm/mach-shmobile/intc-sh7367.c |  172 +++++++++++++++++++++++++++++++++-
 1 file changed, 171 insertions(+), 1 deletion(-)
arch/arm/mach-shmobile/intc-sh7367.c +171 -1
@@ -263,8 +263,178 @@ static struct intc_desc intca_desc __ini
 			   intca_sense_registers, intca_ack_registers),
 };
 
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3,
+	VIO3_VOU,
+	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+	VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2,
+	VPU,
+	SGX530,
+	_2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUB, IPMMU_IPMMUS,
+	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+	MSIOF,
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT,
+	TSIF,
+	IPMMUI,
+	MVI3,
+	ICB,
+	PEP,
+	ASA,
+	BEM,
+	VE2HO,
+	HQE,
+	JPEG,
+	LCDC,
+
+	/* interrupt groups INTCS */
+	_2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720),
+	INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760),
+	INTCS_VECT(VIO3_VOU, 0x780),
+	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+	INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0),
+	INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0),
+	INTCS_VECT(VPU, 0x980),
+	INTCS_VECT(SGX530, 0x9e0),
+	INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20),
+	INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60),
+	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+	INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60),
+	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+	INTCS_VECT(MSIOF, 0xd20),
+	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+	INTCS_VECT(TMU_TUNI2, 0xec0),
+	INTCS_VECT(CMT, 0xf00),
+	INTCS_VECT(TSIF, 0xf20),
+	INTCS_VECT(IPMMUI, 0xf60),
+	INTCS_VECT(MVI3, 0x420),
+	INTCS_VECT(ICB, 0x480),
+	INTCS_VECT(PEP, 0x4a0),
+	INTCS_VECT(ASA, 0x4c0),
+	INTCS_VECT(BEM, 0x4e0),
+	INTCS_VECT(VE2HO, 0x520),
+	INTCS_VECT(HQE, 0x540),
+	INTCS_VECT(JPEG, 0x560),
+	INTCS_VECT(LCDC, 0x580),
+
+	INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1,
+		   _2DDMAC_2DDM2, _2DDMAC_2DDM3),
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+	INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3),
+	INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU,
+	    VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { VIO3_VOU, 0, VE2HO, VPU,
+	    0, 0, 0, 0 } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0,
+	    BEM, ASA, PEP, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, MVI3, 0,
+	    JPEG, HQE, 0, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    SGX530, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, 0, 0, CMT,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+	  { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, 0, IPMMUI, TSIF } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } },
+	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+					      TMU_TUNI2, 0 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } },
+	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd2ffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7367-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
 void __init sh7367_init_irq(void)
 {
-	/* INTCA */
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
 }
author maintainer
#2 lore raw

cover i2c: i2c-sh_mobile update for SH-Mobile ARM

i2c: i2c-sh_mobile update for SH-Mobile ARM

[PATCH 01/03] i2c: i2c-sh_mobile register access code break out [PATCH 02/03] i2c: i2c-sh_mobile support for new ICIC bits [PATCH 03/03] i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

These patches add support for a newer version of the IIC block to the i2c-sh_mobile and enables the driver on SH-Mobile ARM.

Perhaps suitable for the SH tree?

---

 drivers/i2c/busses/Kconfig         |    2 
 drivers/i2c/busses/i2c-sh_mobile.c |  121 ++++++++++++++++++++++++------------
 2 files changed, 85 insertions(+), 38 deletions(-)
author maintainer
#3 lore raw

PATCH 1/3 i2c: i2c-sh_mobile register access code break out

From: Magnus Damm <[email protected]>

Break out register access functions in the
i2c-sh_mobile driver. This update should not
change any driver logic.

---

 drivers/i2c/busses/i2c-sh_mobile.c |   90 +++++++++++++++++++++---------------
 1 file changed, 53 insertions(+), 37 deletions(-)
drivers/i2c/busses/i2c-sh_mobile.c +53 -37
@@ -131,12 +131,12 @@ struct sh_mobile_i2c_data {
 #define NORMAL_SPEED		100000 /* FAST_SPEED 400000 */
 
 /* Register offsets */
-#define ICDR(pd)		(pd->reg + 0x00)
-#define ICCR(pd)		(pd->reg + 0x04)
-#define ICSR(pd)		(pd->reg + 0x08)
-#define ICIC(pd)		(pd->reg + 0x0c)
-#define ICCL(pd)		(pd->reg + 0x10)
-#define ICCH(pd)		(pd->reg + 0x14)
+#define ICDR			0x00
+#define ICCR			0x04
+#define ICSR			0x08
+#define ICIC			0x0c
+#define ICCL			0x10
+#define ICCH			0x14
 
 /* Register bits */
 #define ICCR_ICE		0x80
@@ -159,6 +159,22 @@ struct sh_mobile_i2c_data {
 #define ICIC_WAITE		0x02
 #define ICIC_DTEE		0x01
 
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+	iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+	return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+			unsigned char set, unsigned char clr)
+{
+	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
 	unsigned long i2c_clk;
@@ -196,24 +212,24 @@ static void activate_ch(struct sh_mobile
 		pd->icch = (u_int8_t)(num/denom);
 
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Mask all interrupts */
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICIC, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 }
 
 static void deactivate_ch(struct sh_mobile_i2c_data *pd)
 {
 	/* Clear/disable interrupts */
-	iowrite8(0, ICSR(pd));
-	iowrite8(0, ICIC(pd));
+	iic_wr(pd, ICSR, 0);
+	iic_wr(pd, ICIC, 0);
 
 	/* Disable channel */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Disable clock and mark device as idle */
 	clk_disable(pd->clk);
@@ -232,35 +248,35 @@ static unsigned char i2c_op(struct sh_mo
 
 	switch (op) {
 	case OP_START: /* issue start and trigger DTE interrupt */
-		iowrite8(0x94, ICCR(pd));
+		iic_wr(pd, ICCR, 0x94);
 		break;
 	case OP_TX_FIRST: /* disable DTE interrupt and write data */
-		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX: /* write data */
-		iowrite8(data, ICDR(pd));
+		iic_wr(pd, ICDR, data);
 		break;
 	case OP_TX_STOP: /* write data and issue a stop afterwards */
-		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
+		iic_wr(pd, ICDR, data);
+		iic_wr(pd, ICCR, 0x90);
 		break;
 	case OP_TX_TO_RX: /* select read mode */
-		iowrite8(0x81, ICCR(pd));
+		iic_wr(pd, ICCR, 0x81);
 		break;
 	case OP_RX: /* just read data */
-		ret = ioread8(ICDR(pd));
+		ret = iic_rd(pd, ICDR);
 		break;
 	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
-		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
-			 ICIC(pd));
-		ret = ioread8(ICDR(pd));
-		iowrite8(0xc0, ICCR(pd));
+		iic_wr(pd, ICIC,
+		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+		ret = iic_rd(pd, ICDR);
+		iic_wr(pd, ICCR, 0xc0);
 		break;
 	}
 
@@ -366,7 +382,7 @@ static irqreturn_t sh_mobile_i2c_isr(int
 	unsigned char sr;
 	int wakeup;
 
-	sr = ioread8(ICSR(pd));
+	sr = iic_rd(pd, ICSR);
 	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
@@ -375,7 +391,7 @@ static irqreturn_t sh_mobile_i2c_isr(int
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
 		/* don't interrupt transaction - continue to issue stop */
-		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
 		wakeup = 0;
 	} else if (pd->msg->flags & I2C_M_RD)
 		wakeup = sh_mobile_i2c_isr_rx(pd);
@@ -383,7 +399,7 @@ static irqreturn_t sh_mobile_i2c_isr(int
 		wakeup = sh_mobile_i2c_isr_tx(pd);
 
 	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
-		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
+		iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
 
 	if (wakeup) {
 		pd->sr |= SW_DONE;
@@ -401,21 +417,21 @@ static int start_ch(struct sh_mobile_i2c
 	}
 
 	/* Initialize channel registers */
-	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Enable channel and configure rx ack */
-	iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
 	/* Set the clock */
-	iowrite8(pd->iccl, ICCL(pd));
-	iowrite8(pd->icch, ICCH(pd));
+	iic_wr(pd, ICCL, pd->iccl);
+	iic_wr(pd, ICCH, pd->icch);
 
 	pd->msg = usr_msg;
 	pd->pos = -1;
 	pd->sr = 0;
 
 	/* Enable all interrupts to begin with */
-	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
+	iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
 	return 0;
 }
 
@@ -450,7 +466,7 @@ static int sh_mobile_i2c_xfer(struct i2c
 
 		retry_count = 1000;
 again:
-		val = ioread8(ICSR(pd));
+		val = iic_rd(pd, ICSR);
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
#4 lore raw

PATCH 2/3 i2c: i2c-sh_mobile support for new ICIC bits

In reply to Magnus Damm

From: Magnus Damm <[email protected]>

Add support for a new version of the IIC block
found in the SH-Mobile ARM line of processors.

Prototype patch written by Nishimoto-san.
Tested on sh7377 and sh7372.

---

 drivers/i2c/busses/i2c-sh_mobile.c |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/i2c/busses/i2c-sh_mobile.c +31 -0
@@ -118,8 +118,10 @@ struct sh_mobile_i2c_data {
 	struct i2c_adapter adap;
 
 	struct clk *clk;
+	u_int8_t icic;
 	u_int8_t iccl;
 	u_int8_t icch;
+	u_int8_t flags;
 
 	spinlock_t lock;
 	wait_queue_head_t wait;
@@ -128,6 +130,8 @@ struct sh_mobile_i2c_data {
 	int sr;
 };
 
+#define IIC_FLAG_HAS_ICIC67	(1 << 0)
+
 #define NORMAL_SPEED		100000 /* FAST_SPEED 400000 */
 
 /* Register offsets */
@@ -154,6 +158,8 @@ struct sh_mobile_i2c_data {
 #define ICSR_WAIT		0x02
 #define ICSR_DTE		0x01
 
+#define ICIC_ICCLB8		0x80
+#define ICIC_ICCHB8		0x40
 #define ICIC_ALE		0x08
 #define ICIC_TACKE		0x04
 #define ICIC_WAITE		0x02
@@ -161,6 +167,9 @@ struct sh_mobile_i2c_data {
 
 static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
 {
+	if (offs == ICIC)
+		data |= pd->icic;
+
 	iowrite8(data, pd->reg + offs);
 }
 
@@ -202,6 +211,14 @@ static void activate_ch(struct sh_mobile
 	else
 		pd->iccl = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCL in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCLB8;
+		else
+			pd->icic &= ~ICIC_ICCLB8;
+	}
+
 	/* Calculate the value for icch. From the data sheet:
 	   icch = (p clock / transfer rate) * (H / (L + H)) */
 	num = i2c_clk * 4;
@@ -211,6 +228,14 @@ static void activate_ch(struct sh_mobile
 	else
 		pd->icch = (u_int8_t)(num/denom);
 
+	/* one more bit of ICCH in ICIC */
+	if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+		if ((num/denom) > 0xff)
+			pd->icic |= ICIC_ICCHB8;
+		else
+			pd->icic &= ~ICIC_ICCHB8;
+	}
+
 	/* Enable channel and configure rx ack */
 	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
 
@@ -591,6 +616,12 @@ static int sh_mobile_i2c_probe(struct pl
 		goto err_irq;
 	}
 
+	/* The IIC blocks on SH-Mobile ARM processors
+	 * come with two new bits in ICIC.
+	 */
+	if (size > 0x17)
+		pd->flags |= IIC_FLAG_HAS_ICIC67;
+
 	/* Enable Runtime PM for this device.
 	 *
 	 * Also tell the Runtime PM core to ignore children
#5 lore raw

PATCH 3/3 i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

In reply to Magnus Damm

From: Magnus Damm <[email protected]>

Update the Kconfig entry for the i2c-sh_mobile driver to enable build on SH-Mobile ARM platforms

---

 drivers/i2c/busses/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/Kconfig +1 -1
@@ -520,7 +520,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
#6 lore raw

Re: [PATCH 00/03] i2c: i2c-sh_mobile update for SH-Mobile ARM

In reply to Magnus Damm
Quoted 10 lines · Magnus Damm

i2c: i2c-sh_mobile update for SH-Mobile ARM

[PATCH 01/03] i2c: i2c-sh_mobile register access code break out [PATCH 02/03] i2c: i2c-sh_mobile support for new ICIC bits [PATCH 03/03] i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

These patches add support for a newer version of the IIC block to the i2c-sh_mobile and enables the driver on SH-Mobile ARM.

Perhaps suitable for the SH tree?

I'll add these to i2c-next once I restart it in a few days time.

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw

Re: [PATCH 00/03] i2c: i2c-sh_mobile update for SH-Mobile ARM

Quoted 7 lines · Ben Dooks
Quoted 6 lines · Magnus Damm

i2c: i2c-sh_mobile update for SH-Mobile ARM

[PATCH 01/03] i2c: i2c-sh_mobile register access code break out [PATCH 02/03] i2c: i2c-sh_mobile support for new ICIC bits [PATCH 03/03] i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

Quoted 8 lines
Quoted 4 lines

These patches add support for a newer version of the IIC block to the i2c-sh_mobile and enables the driver on SH-Mobile ARM.

Perhaps suitable for the SH tree?

I'll add these to i2c-next once I restart it in a few days time.

I still don't see these in -next, so I suppose I'll just roll these in to the genesis tree, especially since we have outstanding patches that depend on these.

Applied
#9 lore raw
In reply to Magnus Damm
Quoted 1 line · Magnus Damm

Add SH-Mobile ARM INTCS macros for the INTCS controller.

Quoted 9 lines · Magnus Damm

Add support for the sh7367 INTCS interrupt controller.

INTCS is the interrupt controller for the sh7367 SuperH processor core. It is tied into the INTCA interrupt controller which interfaces to the ARM processor.

INTCS support is implemented using a new INTC table together with a chained interrupt handler that ties into the already supported INTCA controller.

Quoted 9 lines · Magnus Damm

i2c: i2c-sh_mobile update for SH-Mobile ARM

[PATCH 01/03] i2c: i2c-sh_mobile register access code break out [PATCH 02/03] i2c: i2c-sh_mobile support for new ICIC bits [PATCH 03/03] i2c: i2c-sh_mobile kconfig update for SH-Mobile ARM

These patches add support for a newer version of the IIC block to the i2c-sh_mobile and enables the driver on SH-Mobile ARM.

Applied, thanks.