Skip to contentSkip to conversation

RDC321x southbridge and GPIO support

PATCH Superseded Florian Fainelli 2 participants 3 messages Mar 11, 2010 – Mar 17, 2010

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover RDC321x southbridge and GPIO support

Hi Wim, Samuel, Ingo,

Here are 4 patches relative to adding support for the RDC321x southbridge. This southbridge is present on all x86-based RDC321x System-on-a-Chip and provides access to GPIOs and Wathchdog. The watchdog driver is already merged.

Samuel, this is rebased on top of your mfd-2.6 master branch after commit 522dba7 and I think the 4 patches should go via your tree to make sure the merge is consistent.

Thank you.

Florian Fainelli (4):
x86: remove rdc321x_defs.h
MFD: add support for the RDC321x southbridge
GPIO: add support for RDC321x GPIO controller
WATCHDOG: convert rdc321x_wdt to use southbridge accessors

#1 lore raw

Samuel,

Any comments on this? Thanks.

Quoted 19 lines · Florian Fainelli

Hi Wim, Samuel, Ingo,

Here are 4 patches relative to adding support for the RDC321x southbridge. This southbridge is present on all x86-based RDC321x System-on-a-Chip and provides access to GPIOs and Wathchdog. The watchdog driver is already
merged.

Samuel, this is rebased on top of your mfd-2.6 master branch after commit 522dba7 and I think the 4 patches should go via your tree to make sure the merge is consistent.

Thank you.

Florian Fainelli (4):
x86: remove rdc321x_defs.h
MFD: add support for the RDC321x southbridge
GPIO: add support for RDC321x GPIO controller
WATCHDOG: convert rdc321x_wdt to use southbridge accessors

#2 lore raw
In reply to Florian Fainelli

Hi Florian,

Quoted 8 lines

Here are 4 patches relative to adding support for the RDC321x southbridge. This southbridge is present on all x86-based RDC321x System-on-a-Chip and provides access to GPIOs and Wathchdog. The watchdog driver is already merged.

Samuel, this is rebased on top of your mfd-2.6 master branch after commit 522dba7 and I think the 4 patches should go via your tree to make sure the merge is consistent.

Quoted 7 lines

Thank you.

Florian Fainelli (4):
x86: remove rdc321x_defs.h
MFD: add support for the RDC321x southbridge
GPIO: add support for RDC321x GPIO controller
WATCHDOG: convert rdc321x_wdt to use southbridge accessors

Watchdog part is OK for me. So Acked-by me can be added.
Personally I don't like the fact that you remove the rdc321x_defs.h file as the first patch. If someone bisects the kernel, he will get a broken driver between the first and the fourth patch.

Kind regards,
Wim.