TQM8xx: add device tree support for TQM8xx based boards.
PATCH 1/2 TQM8xx: add device tree support for TQM8xx based boards.
also use hwconfig feature for configuring, if this hardware has an fec or not. So we can adjust the DTS, if there is a fec or not.
syntax:
hwconfig=fec:on if hardware has an fec
hwconfig=fec:off if hardware has no fec
Signed-off-by Heiko Schocher <[email protected]>
Signed-off-by Wolfgang Denk <[email protected]>
--- board/tqc/tqm8xx/tqm8xx.c | 119 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 119 insertions(+), 0 deletions(-)
board/tqc/tqm8xx/tqm8xx.c +119 -0
@@ -22,11 +22,16 @@*/ #include <common.h> +#include <hwconfig.h> #include <mpc8xx.h> #ifdef CONFIG_PS2MULT #include <ps2mult.h> #endif +#if defined(CONFIG_OF_BOARD_SETUP ) && defined(CONFIG_OF_LIBFDT ) +#include <libfdt.h> +#endif +extern flash_info_t flash_info[];/* FLASH chips info */ DECLARE_GLOBAL_DATA_PTR ;
@@ -599,6 +604,120 @@ void lcd_show_board_info(void) }#endif /* CONFIG_LCD_INFO */ +/* +* Device Tree Support +*/ +#if defined(CONFIG_OF_BOARD_SETUP ) && defined(CONFIG_OF_LIBFDT ) +int fdt_set_node_and_value (void *blob, +char *nodename, +char *regname, +void *var, +int size) +{ +int ret =0 ; +int nodeoffset =0 ; + + nodeoffset =fdt_path_offset (blob, nodename); +if (nodeoffset >=0 ) { + ret =fdt_setprop (blob, nodeoffset, regname, var, + size); +if (ret <0 ) { +printf ("ft_blob_update(): " +"cannot set %s/%s property; err: %s\n" , + nodename, regname,fdt_strerror (ret)); + } + }else { +printf ("ft_blob_update(): " +"cannot find %s node err:%s\n" , + nodename,fdt_strerror (nodeoffset)); + } +return ret; +} + +int fdt_del_node_name (void *blob,char *nodename) +{ +int ret =0 ; +int nodeoffset =0 ; + + nodeoffset =fdt_path_offset (blob, nodename); +if (nodeoffset >=0 ) { + ret =fdt_del_node (blob, nodeoffset); +if (ret <0 ) { +printf ("%s: cannot delete %s; err: %s\n" , + __func__, nodename,fdt_strerror (ret)); + } + }else { +printf ("%s: cannot find %s node err:%s\n" , + __func__, nodename,fdt_strerror (nodeoffset)); + } +return ret; +} + +int fdt_del_prop_name (void *blob,char *nodename,char *propname) +{ +int ret =0 ; +int nodeoffset =0 ; + + nodeoffset =fdt_path_offset (blob, nodename); +if (nodeoffset >=0 ) { + ret =fdt_delprop (blob, nodeoffset, propname); +if (ret <0 ) { +printf ("%s: cannot delete %s %s; err: %s\n" , + __func__, nodename, propname, +fdt_strerror (ret)); + } + }else { +printf ("%s: cannot find %s node err:%s\n" , + __func__, nodename,fdt_strerror (nodeoffset)); + } +return ret; +} + +/* +* update "brg" property in the blob +*/ +void ft_blob_update (void *blob,bd_t *bd) +{ +uchar enetaddr[6 ]; +ulong brg_data =0 ; + +/* BRG */ + brg_data =cpu_to_be32 (bd->bi_busfreq); +fdt_set_node_and_value (blob, +"/soc/cpm" ,"brg-frequency" , + &brg_data,sizeof (brg_data)); + +/* MAC addr */ +if (eth_getenv_enetaddr ("ethaddr" , enetaddr)) { +fdt_set_node_and_value (blob, +"ethernet0" ,"local-mac-address" , + enetaddr,sizeof (u8) *6 ); + } + +if (hwconfig_arg_cmp ("fec" ,"off" )) { +/* no FEC on this plattform, delete DTS nodes */ +fdt_del_node_name (blob,"ethernet1" ); +fdt_del_node_name (blob,"mdio1" ); +/* also the aliases entries */ +fdt_del_prop_name (blob,"/aliases" ,"ethernet1" ); +fdt_del_prop_name (blob,"/aliases" ,"mdio1" ); + }else { +/* adjust local-mac-address for FEC ethernet */ +if (eth_getenv_enetaddr ("eth1addr" , enetaddr)) { +fdt_set_node_and_value (blob, +"ethernet1" ,"local-mac-address" , + enetaddr,sizeof (u8) *6 ); + } + } +} + +void ft_board_setup (void *blob,bd_t *bd) +{ +ft_cpu_setup (blob, bd); +ft_blob_update (blob, bd); +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ +/* ---------------------------------------------------------------------------- */ /* TK885D specific initializaion */ /* ---------------------------------------------------------------------------- */
Signature · 5 lines
1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedPATCH 1/2 TQM8xx: add device tree support for TQM8xx based boards.
Dear Heiko Schocher,
Quoted 6 lines · In message <[email protected]> you wrote:
also use hwconfig feature for configuring, if this hardware has an fec or not. So we can adjust the DTS, if there is a fec or not.
syntax:
Quoted 8 lines
hwconfig=fec:on if hardware has an fec
hwconfig=fec:off if hardware has no fecSigned-off-by Heiko Schocher <[email protected]>Signed-off-by Wolfgang Denk <[email protected]>--- board/tqc/tqm8xx/tqm8xx.c | 119 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 119 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am a computer. I am dumber than any human and smarter than any ad- ministrator.