Skip to contentSkip to conversation

USB compile fixes omaps

PATCH New Tony Lindgren 3 participants 8 messages Mar 11, 2010 – Mar 12, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover USB compile fixes omaps

Hi Felipe & Greg,

Here are three fixes to make USB compile for omaps. Can you please take a look and queue?

The tusb6010 DMA fix needs a platform init patch that I'll send along with other omap fixes.

Regards,

Tony

---

Tony Lindgren (3):
usb: Fix compile error for omaps for musb_hdrc
usb: Fix USB_SUSPEND dependency for OTG
usb: Fix tusb6010 for DMA API

 drivers/usb/core/Kconfig         |    2 +-
 drivers/usb/musb/musb_core.h     |    4 ++--
 drivers/usb/musb/tusb6010.c      |   13 +++++++++++++
 drivers/usb/musb/tusb6010_omap.c |   22 ++++++++++++++--------
 4 files changed, 30 insertions(+), 11 deletions(-)
Signature · 1 line
Signature
#1 lore raw

PATCH 1/3 usb: Fix compile error for omaps for musb_hdrc

CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3.

But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header.

Otherwise we get the following for most omap3 defconfigs:

drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while'

---
 drivers/usb/musb/musb_core.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/usb/musb/musb_core.h +2 -2
index d849fb8..cd9f4a9 100644
@@ -469,7 +469,7 @@ struct musb_csr_regs {
 
 struct musb_context_registers {
 
-#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_PM
 	u32 otg_sysconfig, otg_forcestandby;
 #endif
 	u8 power;
@@ -483,7 +483,7 @@ struct musb_context_registers {
 	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
 };
 
-#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_PM
 extern void musb_platform_save_context(struct musb *musb,
 		struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,
#2 lore raw

PATCH 1/3 usb: Fix compile error for omaps for musb_hdrc

Quoted 5 lines · ext Tony Lindgren

CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3.

But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header.

Quoted 8 lines

Otherwise we get the following for most omap3 defconfigs:

drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while'

I sent a version for that yesterday. Sorry :-(

Signature · 1 line
balbi
#3 lore raw

PATCH 1/3 usb: Fix compile error for omaps for musb_hdrc

Quoted 3 lines · Balbi Felipe (Nokia-D/Helsinki)
Quoted 1 line

I sent a version for that yesterday. Sorry :-(

turns out I used your version because I didn't know the OMAP3 config was changed.

Signature · 1 line
balbi
#4 lore raw

PATCH 2/3 usb: Fix USB_SUSPEND dependency for OTG

In reply to Tony Lindgren

To use this, PM_RUNTIME must be set as discussed at:

http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460

Otherwise we'll get errors like:

drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function) drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once drivers/usb/core/hcd.c:1892: error: for each function it appears in.)

---
 drivers/usb/core/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/usb/core/Kconfig +1 -1
index 97a819c..7e59444 100644
@@ -109,7 +109,7 @@ config USB_SUSPEND
 config USB_OTG
 	bool
 	depends on USB && EXPERIMENTAL
-	select USB_SUSPEND
+	depends on USB_SUSPEND
 	default n
 
 
#5 lore raw

PATCH 2/3 usb: Fix USB_SUSPEND dependency for OTG

Quoted 5 lines · Tony Lindgren

To use this, PM_RUNTIME must be set as discussed at:

http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460

Quoted 7 lines

Otherwise we'll get errors like:

drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function) drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once drivers/usb/core/hcd.c:1892: error: for each function it appears in.)

Hi Tony,

I already posted this patch last month. Still waiting for it to get queued.

<http://marc.info/?l=linux-usb&m=126675883221098&w=2>

- Anand

Quoted 18 lines
---
 drivers/usb/core/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/usb/core/Kconfig +1 -1
index 97a819c..7e59444 100644
@@ -109,7 +109,7 @@ config USB_SUSPEND
 config USB_OTG
 	bool
 	depends on USB && EXPERIMENTAL
-	select USB_SUSPEND
+	depends on USB_SUSPEND
 	default n
 
 
#6 lore raw

PATCH 2/3 usb: Fix USB_SUSPEND dependency for OTG

Quoted 12 lines · Gadiyar, Anand
Quoted 11 lines · Tony Lindgren

To use this, PM_RUNTIME must be set as discussed at:

http://thread.gmane.org/gmane.linux.usb.general/27432/focus=4460

Otherwise we'll get errors like:

drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in this function) drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is reported only once drivers/usb/core/hcd.c:1892: error: for each function it appears in.)

Quoted 8 lines
Quoted 1 line

Hi Tony,

I already posted this patch last month. Still waiting for it to get queued.

<http://marc.info/?l=linux-usb&m=126675883221098&w=2>

OK thanks, I just found the thread but no patches. So my version can then be dropped.

Tony

#7 lore raw

PATCH 3/3 usb: Fix tusb6010 for DMA API

In reply to Tony Lindgren

Commit 18eabe2347ae7a11b3db768695913724166dfb0e introduced DMA buffer ownership. Fix tusb6010 accordingly.

Also change the order of musb_read_fifo() to happen after dma_cache_maint to have the DMA operations completed before moving the remaining unaligned bytes with PIO. The DMA access and PIO touch different areas of the FIFO, so this change only makes the code a bit easier to follow.

Tested on n810 and g_ether with variable size ping test. The test seems to fail for some ping sizes, but that seems to be a different problem.

---
 drivers/usb/musb/tusb6010.c      |   13 +++++++++++++
 drivers/usb/musb/tusb6010_omap.c |   22 ++++++++++++++--------
 2 files changed, 27 insertions(+), 8 deletions(-)
drivers/usb/musb/tusb6010.c +13 -0
index ab776a8..60d3938 100644
@@ -29,6 +29,19 @@ static void tusb_source_power(struct musb *musb, int is_on);
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
 
+#ifdef CONFIG_PM
+/* REVISIT: These should be only needed if somebody implements off idle */
+void musb_platform_save_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+}
+
+void musb_platform_restore_context(struct musb *musb,
+			struct musb_context_registers *musb_context)
+{
+}
+#endif
+
 /*
  * Checks the revision. We need to use the DMA register as 3.0 does not
  * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
drivers/usb/musb/tusb6010_omap.c +14 -8
index 1c86809..6f0e943 100644
@@ -38,7 +38,7 @@ struct tusb_omap_dma_ch {
 
 	struct tusb_omap_dma	*tusb_dma;
 
-	void __iomem		*dma_addr;
+	dma_addr_t		dma_addr;
 
 	u32			len;
 	u16			packet_sz;
@@ -125,6 +125,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
 	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
 	struct musb		*musb = chdat->musb;
+	struct device		*dev = musb->controller;
 	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
 	void __iomem		*ep_conf = hw_ep->conf;
 	void __iomem		*mbase = musb->mregs;
@@ -172,13 +173,15 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
 		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
 		if (chdat->tx) {
-			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
-					chdat->transfer_len, DMA_TO_DEVICE);
+			dma_unmap_single(dev, chdat->dma_addr,
+						chdat->transfer_len,
+						DMA_TO_DEVICE);
 			musb_write_fifo(hw_ep, pio, buf);
 		} else {
+			dma_unmap_single(dev, chdat->dma_addr,
+						chdat->transfer_len,
+						DMA_FROM_DEVICE);
 			musb_read_fifo(hw_ep, pio, buf);
-			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
-					chdat->transfer_len, DMA_FROM_DEVICE);
 		}
 		channel->actual_len += pio;
 	}
@@ -223,6 +226,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
 	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
 	struct musb			*musb = chdat->musb;
+	struct device			*dev = musb->controller;
 	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
 	void __iomem			*mbase = musb->mregs;
 	void __iomem			*ep_conf = hw_ep->conf;
@@ -298,14 +302,16 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 	chdat->packet_sz = packet_sz;
 	chdat->len = len;
 	channel->actual_len = 0;
-	chdat->dma_addr = (void __iomem *)dma_addr;
+	chdat->dma_addr = dma_addr;
 	channel->status = MUSB_DMA_STATUS_BUSY;
 
 	/* Since we're recycling dma areas, we need to clean or invalidate */
 	if (chdat->tx)
-		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+		dma_map_single(dev, phys_to_virt(dma_addr), len,
+				DMA_TO_DEVICE);
 	else
-		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+		dma_map_single(dev, phys_to_virt(dma_addr), len,
+				DMA_FROM_DEVICE);
 
 	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
 	if ((dma_addr & 0x3) == 0) {