Skip to contentSkip to conversation

i4l: silence compiler warnings for array access in Eicon DIVA ISDN driver

PATCH Applied [email protected] 2 participants 2 messages Mar 11, 2010 – Mar 15, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/3 i4l: silence compiler warnings for array access in Eicon DIVA ISDN driver

From: Ian Munsie <[email protected]>

When compiling this driver, the compiler throws the following warnings:

drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds

This arises from the particular semantics the driver is using to write to the nlc array (static byte[256]). The array has a length in byte 0 followed by a T30_INFO struct starting at byte 1.

The T30_INFO struct has a number of variable length strings after the station_id entry, which cannot be explicitly defined in the struct and the driver accesses them with an array index to station_id beyond the length of station_id.

This patch merely changes the semantics that the driver uses to access the entries after the station_id entry to use the original 256 byte nlc array taking the offset and length of the station_id entry to calculate where to write in the array, thereby silencing the warning.

Cc Armin Schindler <[email protected]>
Cc Karsten Keil <[email protected]>
Cc Stoyan Gaydarov <[email protected]>

---

 drivers/isdn/hardware/eicon/message.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/isdn/hardware/eicon/message.c renamed from drivers/isdn/hardware/eicon/message.c~i4l-silence-compiler-warnings-for-array-access-in-eicon-diva-isdn-driver +7 -8
diff -puN drivers/isdn/hardware/eicon/message.c~i4l-silence-compiler-warnings-for-array-access-in-eicon-diva-isdn-driver drivers/isdn/hardware/eicon/message.c
@@ -8423,17 +8423,17 @@ static word add_b23(PLCI *plci, API_PARS
             pos = 0;
           else
           {
-            ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
-            ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
+            nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
+            nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
             len = (byte)b3_config_parms[2].length;
             if (len > 20)
               len = 20;
             if (CAPI_MAX_DATE_TIME_LENGTH + 2 + len + 2 + b3_config_parms[3].length <= CAPI_MAX_HEAD_LINE_SPACE)
             {
               for (i = 0; i < len; i++)
-                ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ((byte   *)b3_config_parms[2].info)[1+i];
-              ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
-              ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ' ';
+                nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ((byte   *)b3_config_parms[2].info)[1+i];
+              nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
+              nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] = ' ';
             }
           }
         }
@@ -8444,9 +8444,8 @@ static word add_b23(PLCI *plci, API_PARS
         ((T30_INFO *)&nlc[1])->head_line_len = (byte)(pos + len);
         nlc[0] += (byte)(pos + len);
         for (i = 0; i < len; i++)
-          ((T30_INFO *)&nlc[1])->station_id[20 + pos++] = ((byte   *)b3_config_parms[3].info)[1+i];
-        }
-      else
+          nlc[1 + offsetof(T30_INFO, station_id) + 20 + pos++] =  ((byte   *)b3_config_parms[3].info)[1+i];
+      } else
         ((T30_INFO *)&nlc[1])->head_line_len = 0;
 
       plci->nsf_control_bits = 0;

_

maintainer Applied
#1 lore raw

From: [email protected]
Date: Thu, 11 Mar 2010 14:07:24 -0800

Quoted 25 lines

From: Ian Munsie <[email protected]>

When compiling this driver, the compiler throws the following warnings:

drivers/isdn/hardware/eicon/message.c:8426: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8427: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8434: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8435: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8436: warning: array subscript is above array bounds drivers/isdn/hardware/eicon/message.c:8447: warning: array subscript is above array bounds

This arises from the particular semantics the driver is using to write to the nlc array (static byte[256]). The array has a length in byte 0 followed by a T30_INFO struct starting at byte 1.

The T30_INFO struct has a number of variable length strings after the station_id entry, which cannot be explicitly defined in the struct and the driver accesses them with an array index to station_id beyond the length of station_id.

This patch merely changes the semantics that the driver uses to access the entries after the station_id entry to use the original 256 byte nlc array taking the offset and length of the station_id entry to calculate where to write in the array, thereby silencing the warning.

Quoted 5 lines
Cc Armin Schindler <[email protected]>
Cc Karsten Keil <[email protected]>
Cc Stoyan Gaydarov <[email protected]>

Applied.