Skip to contentSkip to conversation

dmaengine: shdma: Introduce include/linux/sh_dma.h

PATCH In review Magnus Damm 2 participants 3 messages Mar 19, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/5 dmaengine: shdma: Introduce include/linux/sh_dma.h

From: Magnus Damm <[email protected]>

Create a common platform data header file for the shdma dmaengine driver. This is done by moving common structures from sh asm/dmaengine.h to linux/sh_dma.h. DMA registers are also copied from sh asm/dma-register.h to make the code architecture independent.

The sh header file asm/dmaengine.h is still kept with the slave id enum. This allows us to keep the old processor specific code as is and slowly move over to slave id enums in per-processor headers.

---

 arch/sh/include/asm/dmaengine.h |   60 -----------------------
 drivers/dma/shdma.c             |    3 -
 drivers/dma/shdma.h             |    3 -
 include/linux/sh_dma.h          |  101 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 104 insertions(+), 63 deletions(-)
arch/sh/include/asm/dmaengine.h +1 -59
@@ -10,12 +10,7 @@
 #ifndef ASM_DMAENGINE_H
 #define ASM_DMAENGINE_H
 
-#include <linux/dmaengine.h>
-#include <linux/list.h>
-
-#include <asm/dma-register.h>
-
-#define SH_DMAC_MAX_CHANNELS	6
+#include <linux/sh_dma.h>
 
 enum {
 	SHDMA_SLAVE_SCIF0_TX,
@@ -36,57 +31,4 @@ enum {
 	SHDMA_SLAVE_SIUB_RX,
 };
 
-struct sh_dmae_slave_config {
-	unsigned int			slave_id;
-	dma_addr_t			addr;
-	u32				chcr;
-	char				mid_rid;
-};
-
-struct sh_dmae_channel {
-	unsigned int	offset;
-	unsigned int	dmars;
-	unsigned int	dmars_bit;
-};
-
-struct sh_dmae_pdata {
-	struct sh_dmae_slave_config *slave;
-	int slave_num;
-	struct sh_dmae_channel *channel;
-	int channel_num;
-	unsigned int ts_low_shift;
-	unsigned int ts_low_mask;
-	unsigned int ts_high_shift;
-	unsigned int ts_high_mask;
-	unsigned int *ts_shift;
-	int ts_shift_num;
-	u16 dmaor_init;
-};
-
-struct device;
-
-/* Used by slave DMA clients to request DMA to/from a specific peripheral */
-struct sh_dmae_slave {
-	unsigned int			slave_id; /* Set by the platform */
-	struct device			*dma_dev; /* Set by the platform */
-	struct sh_dmae_slave_config	*config;  /* Set by the driver */
-};
-
-struct sh_dmae_regs {
-	u32 sar; /* SAR / source address */
-	u32 dar; /* DAR / destination address */
-	u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_desc {
-	struct sh_dmae_regs hw;
-	struct list_head node;
-	struct dma_async_tx_descriptor async_tx;
-	enum dma_data_direction direction;
-	dma_cookie_t cookie;
-	size_t partial;
-	int chunks;
-	int mark;
-};
-
 #endif
drivers/dma/shdma.c +1 -2
@@ -25,8 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-
-#include <asm/dmaengine.h>
+#include <linux/sh_dma.h>
 
 #include "shdma.h"
 
drivers/dma/shdma.h +1 -2
@@ -17,8 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/list.h>
 
-#include <asm/dmaengine.h>
-
+#define SH_DMAC_MAX_CHANNELS 6
 #define SH_DMA_SLAVE_NUMBER 256
 #define SH_DMA_TCR_MAX 0x00FFFFFF	/* 16MB */
 
include/linux/sh_dma.h new file +101 -0

101 lines not on this page · raw message

#1 lore raw
Quoted 16 lines · Magnus Damm

From: Magnus Damm <[email protected]>

Create a common platform data header file for the shdma dmaengine driver. This is done by moving common structures from sh asm/dmaengine.h to linux/sh_dma.h. DMA registers are also copied from sh asm/dma-register.h to make the code architecture independent.

The sh header file asm/dmaengine.h is still kept with the slave id enum. This allows us to keep the old processor specific code as is and slowly move over to slave id enums in per-processor headers.

---

...

arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900 line 16

Quoted 10 lines
arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900 renamed from arch/sh/include/asm/dmaengine.h +0 -4
@@ -10,12 +10,7 @@
 #ifndef ASM_DMAENGINE_H
 #define ASM_DMAENGINE_H
 
-#include <linux/dmaengine.h>
-#include <linux/list.h>
-
-#include <asm/dma-register.h>

include/linux/sh_dma_register.h? (see below)

[snip]

Quoted 24 lines
arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900 renamed from arch/sh/include/asm/dmaengine.h +24 -0
+/* DMA register */
+#define SAR    0x00
+#define DAR    0x04
+#define TCR    0x08
+#define CHCR   0x0C
+#define DMAOR  0x40
+
+/* DMAOR definitions */
+#define DMAOR_AE       0x00000004
+#define DMAOR_NMIF     0x00000002
+#define DMAOR_DME      0x00000001
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L  0x00000000
+#define REQ_E  0x00080000
+#define RACK_H 0x00000000
+#define RACK_L 0x00040000
+#define ACK_R  0x00000000
+#define ACK_W  0x00020000
+#define ACK_H  0x00000000
+#define ACK_L  0x00010000
+#define DM_INC 0x00004000
+#define DM_DEC 0x00008000
+#define DM_FIX 0x0000c000

arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900

Quoted 10 lines
arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900 renamed from arch/sh/include/asm/dmaengine.h +10 -0
+#define SM_INC 0x00001000
+#define SM_DEC 0x00002000
+#define SM_FIX 0x00003000
+#define RS_IN  0x00000200
+#define RS_OUT 0x00000300
+#define TS_BLK 0x00000040
+#define TM_BUR 0x00000020
+#define CHCR_DE        0x00000001
+#define CHCR_TE        0x00000002
+#define CHCR_IE        0x00000004

I am still not sure it is a good idea to duplicate these from legacy SH DMA driver, maybe we could just move them in a include/linux/sh_dma_register.h if they are indeed common?

Ok, I might be lazy on a Friday morning, but could you maybe regenerate this one with "-M -C --find-copies-harder" or whatever it takes to make git use "git rename" for this? This should work if we don't duplicate register names, not sure otherwise...

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

#2 lore raw
In reply to Magnus Damm
Quoted 7 lines · Guennadi Liakhovetski
Quoted 6 lines · Magnus Damm
arch/sh/include/asm/dmaengine.h        2010-03-18 23:25:04.000000000 +0900 renamed from arch/sh/include/asm/dmaengine.h +0 -0
@@ -10,12 +10,7 @@
  #ifndef ASM_DMAENGINE_H
  #define ASM_DMAENGINE_H
 
Quoted 9 lines

arch/sh/include/asm/dmaengine.h        2010-03-18 23:25:04.000000000 +0900 line 16

Quoted 4 lines
arch/sh/include/asm/dmaengine.h        2010-03-18 23:25:04.000000000 +0900 renamed from arch/sh/include/asm/dmaengine.h +0 -4
-#include <linux/dmaengine.h>
-#include <linux/list.h>
-
-#include <asm/dma-register.h>

include/linux/sh_dma_register.h? (see below)
I am still not sure it is a good idea to duplicate these from legacy SH DMA driver, maybe we could just move them in a include/linux/sh_dma_register.h if they are indeed common?

Nah, no point in adding another header file. The legacy driver should just die and we're not going to do any more development there. So duplicating them is fine IMO.

Quoted 4 lines

Ok, I might be lazy on a Friday morning, but could you maybe regenerate this one with "-M -C --find-copies-harder" or whatever it takes to make git use "git rename" for this? This should work if we don't duplicate register names, not sure otherwise...

I don't think that will help if we have two copies of the register names.

Thanks for your help!

/ magnus