Skip to contentSkip to conversation

USB fixes for 2.6.34-git

PATCH New Greg KH 1 participant 1 message Mar 19, 2010

lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 USB fixes for 2.6.34-git

Here are a number of USB bugfixes and new device ids for your 2.6.34-git tree.

Biggest here is a rename of a file to allow the xhci driver to follow the naming convention of the other USB host controller drivers (it is moving from xhci.ko to xhci-hcd.ko).

The cdc-wdm driver also got a lot of fixes and there is a regression fix for the usbfs userspace issue that was reported.

Please pull from:

	master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/

All of these patches have been in the linux-next and mm trees.

The full patches will be sent to the linux-usb mailing list, if anyone wants to see them.

thanks,

greg k-h

------------

 Documentation/ABI/testing/sysfs-bus-usb |    2 +-
 drivers/usb/class/cdc-acm.c             |    2 +-
 drivers/usb/class/cdc-wdm.c             |  134 ++++++++++++++++++-------------
 drivers/usb/core/devio.c                |   17 +++-
 drivers/usb/core/urb.c                  |    1 +
 drivers/usb/gadget/Kconfig              |    2 +-
 drivers/usb/gadget/epautoconf.c         |    2 +-
 drivers/usb/gadget/f_mass_storage.c     |    3 +-
 drivers/usb/gadget/gadget_chips.h       |    8 ++
 drivers/usb/gadget/goku_udc.c           |    2 +-
 drivers/usb/gadget/multi.c              |    2 -
 drivers/usb/gadget/r8a66597-udc.c       |    1 +
 drivers/usb/host/Makefile               |    4 +-
 drivers/usb/host/ehci-hcd.c             |    2 +-
 drivers/usb/host/ehci-sched.c           |   28 +++++--
 drivers/usb/host/ehci.h                 |    5 +-
 drivers/usb/host/r8a66597-hcd.c         |   16 +++-
 drivers/usb/host/xhci-mem.c             |    9 ++-
 drivers/usb/host/{xhci-hcd.c => xhci.c} |    1 +
 drivers/usb/musb/musb_core.c            |   13 ++-
 drivers/usb/musb/musb_core.h            |    4 +-
 drivers/usb/musb/musb_host.c            |    2 +-
 drivers/usb/musb/musb_regs.h            |   28 +++++++
 drivers/usb/serial/Kconfig              |    4 +-
 drivers/usb/serial/cp210x.c             |    5 -
 drivers/usb/serial/ftdi_sio.c           |    7 +-
 drivers/usb/serial/ftdi_sio_ids.h       |    7 ++
 drivers/usb/serial/generic.c            |   49 ++++++-----
 drivers/usb/serial/option.c             |   53 ++++++++++++-
 drivers/usb/serial/qcserial.c           |   29 +++++++
 drivers/usb/storage/unusual_devs.h      |   23 ++---
 include/linux/usb.h                     |   18 +++-
 32 files changed, 335 insertions(+), 148 deletions(-)
 rename drivers/usb/host/{xhci-hcd.c => xhci.c} (99%)

---------------

Alan Stern (1):
USB: fix usbfs regression

Alessio Igor Bogani (1):
USB: ftdi_sio: Fix locking for change_speed() function

Alex Chiang (1):
USB: xhci: rename driver to xhci_hcd

Andiry Xu (1):
USB: xHCI: re-initialize cmd_completion

Bernhard Rosenkraenzer (1):
USB: qcserial: add new device ids

Christoph Egger (1):
USB: Remove last bit of CONFIG_USB_BERRY_CHARGE

Clemens Ladisch (2):
USB: EHCI: fix ITD list order
USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh

Dan Carpenter (1):
USB: goku_udc: remove potential null dereference

Daniel Sangorrin (1):
USB: serial: ftdi: add CONTEC vendor and product id

Felipe Balbi (1):
usb: musb: core: declare mbase only where it's used

Grant Likely (1):
usb/gadget: fix compile error on r8a66597-udc.c

Huang Ying (1):
USB: Option: Add support for a variant of DLink DWM 652 U5

Johan Hovold (3):
USB: serial: fix error message on close in generic driver
USB: serial: fix softint not being called on errors
USB: serial: use port endpoint size to determine if ep is available

Matthew Wilcox (1):
USB: Fix usb_fill_int_urb for SuperSpeed devices

Maurus Cuelenaere (1):
USB: gadget: add gadget controller number for s3c-hsotg driver

Michael Brunner (1):

      USB: cp210x: Remove double usb_control_msg from cp210x_set_config

Michal Nazarewicz (1):
USB: g_mass_storage: fixed module name in Kconfig

Mike Frysinger (4):
usb: musb: abstract out ULPI_BUSCONTROL register reads/writes
USB: musb: fix warnings in Blackfin regs
USB: gadget: fix Blackfin builds after gadget cleansing
USB: g_mass_storage: fix section mismatch warnings

Nathaniel McCallum (3):
USB: option: fix incorrect manufacturer name in usb/serial/option: MAXON->CMOTECH
USB: option: move hardcoded PID to a macro in usb/serial/option
USB: option: add support for a new CMOTECH device to usb/serial/option

Oliver Neukum (9):
USB: cdc-acm: Fix stupid NULL pointer in resume()
USB: Fix documentation for avoid_reset_quirk
usb: cdc-wdm: Fix race between write and disconnect
usb: cdc-wdm: Fix race between autosuspend and reading from the device
usb: cdc-wdm: Fix race between disconnect and debug messages
usb: cdc-wdm: Fix submission of URB after suspension
usb: cdc-wdm:Fix loss of data due to autosuspend
usb: cdc-wdm: Fix order in disconnect and fix locking
usb: cdc-wdm: Fix deadlock between write and resume

Ondrej Zary (1):
USB: unusual_devs.h: Fix capacity for SL11R-IDE 2.6c

Peter Korsgaard (2):
USB: gadget: f_mass_storage::fsg_bind(): fix error handling
USB: gadget/multi: cdc_do_config: remove redundant check

Sarah Sharp (1):
USB: xhci: Make endpoint interval debugging clearer.

Sonic Zhang (1):
USB: musb: fix build error introduced by isoc change

Stefan Schmidt (1):
USB: serial: Fix module name typo for qcaux Kconfig entry.

Tony Lindgren (1):
usb: musb: Fix compile error for omaps for musb_hdrc

Yoshihiro Shimoda (1):
usb: r8a66597-hcd: fix removed from an attached hub

spark (1):

      USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff