powernow-k8: Core Performance Boost and effective frequency support
Subsystems (2)
cover powernow-k8: Core Performance Boost and effective frequency support
From: Borislav Petkov <[email protected]>
Hi all,
here's a small patchset that implements two new performance-related features on AMD: Core Performance Boost and Effective Frequency reporting (APERF/MPERF). Details for each are to be found in the respective commit messages, as Andrew requested :).
5/5 overloads the /sys/devices/system/cpu/cpu3/cpufreq/scaling_cur_freq
interface to show the actual core frequency when boosting. Let me know if the way it is done is agreeable.
Thanks,
Boris.
PATCH 1/5 cpufreq: Unify sysfs attribute definition macros
From: Borislav Petkov <[email protected]>
Multiple modules used to define those which are with identical functionality and were needlessly replicated among the different cpufreq drivers. Push them into the header and remove duplication.
--- drivers/cpufreq/cpufreq.c | 40 +++++++++----------------- drivers/cpufreq/cpufreq_conservative.c | 48 ++++++++++--------------------- drivers/cpufreq/cpufreq_ondemand.c | 40 ++++++++------------------ include/linux/cpufreq.h | 30 ++++++++++++++++++++ 4 files changed, 72 insertions(+), 86 deletions(-)
drivers/cpufreq/cpufreq.c +14 -26
@@ -662,32 +662,20 @@ static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)return sprintf (buf,"%u\n" , policy->cpuinfo.max_freq); } -#define define_one_ro (_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0444, show_##_name, NULL) - -#define define_one_ro0400 (_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0400, show_##_name, NULL) - -#define define_one_rw (_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_ro0400 (cpuinfo_cur_freq); -define_one_ro (cpuinfo_min_freq); -define_one_ro (cpuinfo_max_freq); -define_one_ro (cpuinfo_transition_latency); -define_one_ro (scaling_available_governors); -define_one_ro (scaling_driver); -define_one_ro (scaling_cur_freq); -define_one_ro (bios_limit); -define_one_ro (related_cpus); -define_one_ro (affected_cpus); -define_one_rw (scaling_min_freq); -define_one_rw (scaling_max_freq); -define_one_rw (scaling_governor); -define_one_rw (scaling_setspeed); +define_one_freq_ro_perm (cpuinfo_cur_freq,0400 ); +define_one_freq_ro (cpuinfo_min_freq); +define_one_freq_ro (cpuinfo_max_freq); +define_one_freq_ro (cpuinfo_transition_latency); +define_one_freq_ro (scaling_available_governors); +define_one_freq_ro (scaling_driver); +define_one_freq_ro (scaling_cur_freq); +define_one_freq_ro (bios_limit); +define_one_freq_ro (related_cpus); +define_one_freq_ro (affected_cpus); +define_one_freq_rw (scaling_min_freq); +define_one_freq_rw (scaling_max_freq); +define_one_freq_rw (scaling_governor); +define_one_freq_rw (scaling_setspeed);static struct attribute *default_attrs[] = { &cpuinfo_min_freq.attr,
drivers/cpufreq/cpufreq_conservative.c +16 -32
72 lines not on this page · raw message
drivers/cpufreq/cpufreq_ondemand.c +12 -28
@@ -234,12 +234,8 @@ static ssize_t show_sampling_rate_min(struct kobject *kobj,return sprintf (buf,"%u\n" , min_sampling_rate); } -#define define_one_ro (_name) \ -static struct global_attr _name = \ -__ATTR(_name, 0444, show_##_name, NULL) - -define_one_ro (sampling_rate_max); -define_one_ro (sampling_rate_min); +define_one_global_ro (sampling_rate_max); +define_one_global_ro (sampling_rate_min);/* cpufreq_ondemand Governor Tunables */ #define show_one (file_name, object) \
@@ -274,12 +270,8 @@ show_one_old(powersave_bias);show_one_old (sampling_rate_min);show_one_old (sampling_rate_max); -#define define_one_ro_old (object, _name) \ -static struct freq_attr object = \ -__ATTR(_name, 0444, show_##_name##_old, NULL) - -define_one_ro_old (sampling_rate_min_old, sampling_rate_min); -define_one_ro_old (sampling_rate_max_old, sampling_rate_max); +define_one_freq_ro_old (sampling_rate_min); +define_one_freq_ro_old (sampling_rate_max);/*** delete after deprecation time ***/
@@ -376,14 +368,10 @@ static ssize_t store_powersave_bias(struct kobject *a, struct attribute *b,return count; } -#define define_one_rw (_name) \ -static struct global_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_rw (sampling_rate); -define_one_rw (up_threshold); -define_one_rw (ignore_nice_load); -define_one_rw (powersave_bias); +define_one_global_rw (sampling_rate); +define_one_global_rw (up_threshold); +define_one_global_rw (ignore_nice_load); +define_one_global_rw (powersave_bias);static struct attribute *dbs_attributes[] = { &sampling_rate_max.attr,
@@ -415,14 +403,10 @@ write_one_old(up_threshold);write_one_old (ignore_nice_load);write_one_old (powersave_bias); -#define define_one_rw_old (object, _name) \ -static struct freq_attr object = \ -__ATTR(_name, 0644, show_##_name##_old, store_##_name##_old) - -define_one_rw_old (sampling_rate_old, sampling_rate); -define_one_rw_old (up_threshold_old, up_threshold); -define_one_rw_old (ignore_nice_load_old, ignore_nice_load); -define_one_rw_old (powersave_bias_old, powersave_bias); +define_one_freq_rw_old (sampling_rate); +define_one_freq_rw_old (up_threshold); +define_one_freq_rw_old (ignore_nice_load); +define_one_freq_rw_old (powersave_bias);static struct attribute *dbs_attributes_old[] = { &sampling_rate_max_old.attr,
include/linux/cpufreq.h +30 -0
@@ -278,6 +278,27 @@ struct freq_attr {ssize_t (*store)(struct cpufreq_policy *,const char *,size_t count); }; +#define define_one_freq_ro (_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +#define define_one_freq_ro_perm (_name, _perm) \ +static struct freq_attr _name = \ +__ATTR(_name, _perm, show_##_name, NULL) + +#define define_one_freq_ro_old (_name) \ +static struct freq_attr _name##_old = \ +__ATTR(_name, 0444, show_##_name##_old, NULL) + +#define define_one_freq_rw (_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name) + +#define define_one_freq_rw_old (_name) \ +static struct freq_attr _name##_old = \ +__ATTR(_name, 0644, show_##_name##_old, store_##_name##_old) + +struct global_attr {struct attribute attr; ssize_t (*show)(struct kobject *kobj,
@@ -286,6 +307,15 @@ struct global_attr { const char *c, size_t count); }; +#define define_one_global_ro (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +#define define_one_global_rw (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name) + +/********************************************************************* * CPUFREQ 2.6. INTERFACE * *********************************************************************/
Signature · 1 line
1.7.0
Re: [PATCH 1/5] cpufreq: Unify sysfs attribute definition macros
Quoted 6 lines · On Monday 22 March 2010 19:38:37 Borislav Petkov wrote:
From: Borislav Petkov <[email protected]>
Multiple modules used to define those which are with identical functionality and were needlessly replicated among the different cpufreq drivers. Push them into the header and remove duplication.
...
Quoted 7 lines
include/linux/cpufreq.h +0
-0@@ -278,6 +278,27 @@ struct freq_attr {ssize_t (*store)(struct cpufreq_policy *,const char *,size_t count); };
...
include/linux/cpufreq.h struct global_attr { · line 316
Quoted 8 lines
include/linux/cpufreq.h +7
-0+#define define_one_global_ro (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +#define define_one_global_rw (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name)
These sound like too general names in global space. And are unrelated to cpufreq(.h).
Eventually you get them into sysfs.h with another name or just duplicate them?
Thomas
Re: [PATCH 1/5] cpufreq: Unify sysfs attribute definition macros
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:07:29PM +0100
Quoted 10 lines
include/linux/cpufreq.h struct global_attr { · line 316
Quoted 7 lines
include/linux/cpufreq.h +7
-0+#define define_one_global_ro (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +#define define_one_global_rw (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name)These sound like too general names in global space. And are unrelated to cpufreq(.h).
maybe call them cpufreq_define_(global|freq)_* then?
Quoted 2 lines
Eventually you get them into
sysfs.hwith another name or just duplicate them?
Well, struct freq_attr for example is cpufreq-specific attribute, AFAICT. So, keeping them in cpufreq.h should be fine, no?
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
Re: [PATCH 1/5] cpufreq: Unify sysfs attribute definition macros
Quoted 14 lines · On Tuesday 23 March 2010 12:44:09 Borislav Petkov wrote:
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:07:29PM +0100Quoted 10 lines
include/linux/cpufreq.h struct global_attr { · line 316
Quoted 7 lines
include/linux/cpufreq.h +7
-0+#define define_one_global_ro (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +#define define_one_global_rw (_name) \ +static struct global_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name)These sound like too general names in global space. And are unrelated to cpufreq(.h).
Quoted 7 lines
maybe call them cpufreq_define_(global|freq)_* then?
Quoted 2 lines
Eventually you get them into
sysfs.hwith another name or just duplicate them?Well, struct
freq_attrfor example is cpufreq-specific attribute, AFAICT. So, keeping them incpufreq.hshould be fine, no?
You don't need much of these (one or two?).
I'd leave this cleanup out for your patch series.
You care about the boost and aperf/mperf stuff and not about this cleanup?
Thomas
Re: [PATCH 1/5] cpufreq: Unify sysfs attribute definition macros
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:55:30PM +0100
Quoted 3 lines
Quoted 2 lines
Well, struct
freq_attrfor example is cpufreq-specific attribute, AFAICT. So, keeping them incpufreq.hshould be fine, no?You don't need much of these (one or two?).
I don't think I get what you mean here..?
Quoted 3 lines
I'd leave this cleanup out for your patch series.
You care about the boost and aperf/mperf stuff and not about this cleanup?
Why? What's wrong with cleaning up obviously duplicated code?
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
Re: [PATCH 1/5] cpufreq: Unify sysfs attribute definition macros
Quoted 8 lines · On Tuesday 23 March 2010 13:05:34 Borislav Petkov wrote:
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:55:30PM +0100Quoted 3 lines
Quoted 2 lines
Well, struct
freq_attrfor example is cpufreq-specific attribute, AFAICT. So, keeping them incpufreq.hshould be fine, no?You don't need much of these (one or two?).
I don't think I get what you mean here..?
I expect you did this because you use it in your follow up patches, e.g. +define_one_freq_rw(cpb);
If you don't want to argue about global names, but get your boost code in quickly, just also duplicate the macro and if you have some time left you could still do an on-top cleanup later.
Thomas
PATCH 2/5 powernow-k8: Add core performance boost support
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Starting with F10h, revE, AMD processors add support for a dynamic core boosting feature called Core Performance Boost. When a specific condition is present, a subset of the cores on a system are boosted beyond their P0 operating frequency to speed up the performance of single-threaded applications.
In the normal case, the system comes out of reset with core boosting enabled. This patch adds a sysfs knob with which core boosting can be switched on or off for benchmarking purposes.
While at it, cleanup the driver init codepath and update copyrights.
--- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 115 ++++++++++++++++++++++++++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 3 +- 2 files changed, 106 insertions(+), 12 deletions(-)
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +105 -10
@@ -1,6 +1,5 @@ -/* -* (c) 2003-2006 Advanced Micro Devices, Inc. +* (c) 2003-2010 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html
@@ -54,6 +53,10 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);static int cpu_family =CPU_OPTERON ; +/* core performance boost */ +static bool cpb_capable, cpb_disabled; +static struct msr __percpu *msrs; +#ifndef CONFIG_SMP static inline const struct cpumask *cpu_core_mask (int cpu) {
@@ -1393,8 +1396,69 @@ out:return khz; } +static void _cpb_toggle_msrs (bool t) +{ +int cpu; + +rdmsr_on_cpus (cpu_online_mask,MSR_K7_HWCR , msrs); + +for_each_cpu (cpu, cpu_online_mask) { +struct msr *reg =per_cpu_ptr (msrs, cpu); +if (t) + reg->l &= ~BIT (25 ); +else + reg->l |=BIT (25 ); + } +wrmsr_on_cpus (cpu_online_mask,MSR_K7_HWCR , msrs); +} + +/* +* Switch on/off core performance boosting. +* +* 0=disable +* 1=enable. +*/ +static void cpb_toggle (bool t) +{ +if (!cpb_capable) +return ; + +if (t && cpb_disabled) { + cpb_disabled = false; +_cpb_toggle_msrs (t); + printk(KERN_INFO PFX "Core Boosting enabled.\n"); + }else if (!(t || cpb_disabled)) { + cpb_disabled = true; +_cpb_toggle_msrs (t); + printk(KERN_INFO PFX "Core Boosting disabled.\n"); + } +} + +static ssize_t store_cpb (struct cpufreq_policy *policy,const char *buf, +size_t count) +{ +int ret = -EINVAL ; +unsigned long val =0 ; + + ret =strict_strtoul (buf,10 , &val); +if (!ret && (val ==0 || val ==1 ) && cpb_capable) +cpb_toggle (val); +else +return -EINVAL ; + +return count; +} + +static ssize_t show_cpb (struct cpufreq_policy *policy,char *buf) +{ +return sprintf (buf,"%u\n" , !cpb_disabled); +} + +define_one_freq_rw (cpb); +static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, + &cpb,NULL , };
@@ -1410,10 +1474,17 @@ static struct cpufreq_driver cpufreq_amd64_driver = { .attr = powernow_k8_attr, }; +static bool __cpuinit check_cpb_capable (void ) +{ +u32 tmp =cpuid_edx (CPUID_FREQ_VOLT_CAPABILITIES ); + +return (tmp &CPB_CAPABLE ); +} +/* driver entry point for init */ static int __cpuinit powernowk8_init (void ) { -unsigned int i, supported_cpus =0 ; +unsigned int i, supported_cpus =0 , cpu;for_each_online_cpu (i) {int rc;
@@ -1422,15 +1493,36 @@ static int __cpuinit powernowk8_init(void) supported_cpus++; } -if (supported_cpus ==num_online_cpus ()) { - printk(KERN_INFO PFX "Found %d %s " -"processors (%d cpu cores) (" VERSION ")\n" , -num_online_nodes (), - boot_cpu_data.x86_model_id, supported_cpus); -return cpufreq_register_driver (&cpufreq_amd64_driver); +if (supported_cpus !=num_online_cpus ()) +return -ENODEV ; + + printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", + num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); + + cpb_capable =check_cpb_capable (); +if (cpb_capable) { + + msrs =msrs_alloc (); +if (!msrs) { +printk (KERN_ERR "%s: Error allocating msrs!\n" , __func__); +return -ENOMEM ; + } + +rdmsr_on_cpus (cpu_online_mask,MSR_K7_HWCR , msrs); + +for_each_cpu (cpu, cpu_online_mask) { +struct msr *reg =per_cpu_ptr (msrs, cpu); + cpb_disabled |= !!(reg->l &BIT (25 )); + } + + printk(KERN_INFO PFX "Core Performance Boosting: "); +if (cpb_disabled) +printk (KERN_CONT "off.\n" ); +else +printk (KERN_CONT "on.\n" ); } -return -ENODEV ; +return cpufreq_register_driver (&cpufreq_amd64_driver); }/* driver entry point for term */
@@ -1438,6 +1530,9 @@ static void __exit powernowk8_exit(void) {dprintk ("exit\n" ); +msrs_free (msrs); + msrs =NULL ; +cpufreq_unregister_driver (&cpufreq_amd64_driver); }
arch/x86/kernel/cpu/cpufreq/powernow-k8.h +1 -2
@@ -5,7 +5,6 @@* http://www.gnu.org/licenses/gpl.html */ -enum pstate {HW_PSTATE_INVALID =0xff ,HW_PSTATE_0 =0 ,
@@ -55,7 +54,6 @@ struct powernow_k8_data {struct cpumask *available_cores; }; -/* processor's cpuid instruction support */ #define CPUID_PROCESSOR_SIGNATURE 1/* function 1 */ #define CPUID_XFAM 0x0ff00000/* extended family */
@@ -67,6 +65,7 @@ struct powernow_k8_data {#define CPUID_GET_MAX_CAPABILITIES 0x80000000#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007#define P_STATE_TRANSITION_CAPABLE 6 +#define CPB_CAPABLE 0x00000200/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ /* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */
Signature · 1 line
1.7.0
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
Quoted 33 lines · On Monday 22 March 2010 19:38:38 Borislav Petkov wrote:
From: Borislav Petkov <[email protected]>
Starting with F10h, revE, AMD processors add support for a dynamic core boosting feature called Core Performance Boost. When a specific condition is present, a subset of the cores on a system are boosted beyond their P0 operating frequency to speed up the performance of single-threaded applications.
In the normal case, the system comes out of reset with core boosting enabled. This patch adds a sysfs knob with which core boosting can be switched on or off for benchmarking purposes.
While at it, cleanup the driver init codepath and update copyrights.
Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 115 ++++++++++++++++++++++++++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 3 +- 2 files changed, 106 insertions(+), 12 deletions(-)arch/x86/kernel/cpu/cpufreq/powernow-k8.c +1
-2@@ -1,6 +1,5 @@ -/* -* (c) 2003-2006 Advanced Micro Devices, Inc. +* (c) 2003-2010 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html
arch/x86/kernel/cpu/cpufreq/powernow-k8.c static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); · line 57
Quoted 5 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2
-0@@ -54,6 +53,10 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);static int cpu_family =CPU_OPTERON ; +/* core performance boost */ +static bool cpb_capable, cpb_disabled;
Whatabout using a cpufeature (arch/x86/include/asm/cpufeature.h) instead of cpb_capable. Then people could see this feature in /proc/cpuinfo and other code parts could check for it easily if needed later.
It could already be set in arch/x86/kernel/cpu/amd.c and powernow-k8 could use cpu_has(cpu, X86_FEATURE_CPB);
Instead of cpb_disabled, I'd use cpb_enabled. Checking for !cpb_disabled whether it's enabled, is ugly to read.
Quoted 28 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +21
-0+static struct msr __percpu *msrs; +#ifndef CONFIG_SMP static inline const struct cpumask *cpu_core_mask (int cpu) {@@ -1393,8 +1396,69 @@ out:return khz; } +static void _cpb_toggle_msrs (bool t) +{ +int cpu; + +rdmsr_on_cpus (cpu_online_mask,MSR_K7_HWCR , msrs); + +for_each_cpu (cpu, cpu_online_mask) { +struct msr *reg =per_cpu_ptr (msrs, cpu); +if (t) + reg->l &= ~BIT (25 ); +else + reg->l |=BIT (25 ); + } +wrmsr_on_cpus (cpu_online_mask,MSR_K7_HWCR , msrs); +} + +/* +* Switch on/off core performance boosting. +*
arch/x86/kernel/cpu/cpufreq/powernow-k8.c out: · line 1427
Quoted 10 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +10
-0+* 0=disable +* 1=enable. +*/ +static void cpb_toggle (bool t) +{ +if (!cpb_capable) +return ; + +if (t && cpb_disabled) { + cpb_disabled = false;
cpb_enabled = true
is better.
arch/x86/kernel/cpu/cpufreq/powernow-k8.c out: · line 1429
Quoted 2 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2
-0+_cpb_toggle_msrs (t); + printk(KERN_INFO PFX "Core Boosting enabled.\n");
Always printk on every toggle?
That should not happen often and a user might want to get noticed if an app does this behind his back -> should be fine w/ or w/o, just not sure whether it's intended.
...
Thomas
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
(Adding hpa to Cc)
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:17:16PM +0100
Quoted 6 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); · line 57
Quoted 2 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2
-0+/* core performance boost */ +static bool cpb_capable, cpb_disabled;Whatabout using a cpufeature (
arch/x86/include/asm/cpufeature.h) instead ofcpb_capable. Then people could see this feature in/proc/cpuinfoand other code parts could check for it easily if needed later.
I don't have a problem with that per se. It's just that /proc/cpuinfo is a widely used interface and, AFAIR, changing it is not taken that lightly.
Peter, what do you think?
Quoted 2 lines
It could already be set in
arch/x86/kernel/cpu/amd.cand powernow-k8 could usecpu_has(cpu, X86_FEATURE_CPB);
I'd still like to cache the cpb_capable value locally instead of getting x86_cpuinfo percpu var and querying it. Especially if this happens often and not only at driver init.
Quoted 2 lines
Instead of
cpb_disabled, I'd usecpb_enabled. Checking for !cpb_disabled whether it's enabled, is ugly to read.
Fair enough, cpb_disabled reflects the bit semantics in the MSR but why not, don't matter which to me.
[..]
Quoted 6 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c out: · line 1429
Quoted 2 lines
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2
-0+_cpb_toggle_msrs (t); + printk(KERN_INFO PFX "Core Boosting enabled.\n");Always printk on every toggle?
That should not happen often and a user might want to get noticed if an app does this behind his back -> should be fine w/ or w/o, just not sure whether it's intended.
Well, actually, this should be on by default and the user or an app shouldn't be fidgeting with it all the time. It's there only for benchmarking purposes so that you can disable it when you really have to. But I guess it actually is going to get used if its there so maybe we should have to rethink our approach. Hmm...
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
Hey,
Quoted 6 lines · Borislav Petkov
Quoted 2 lines
It could already be set in
arch/x86/kernel/cpu/amd.cand powernow-k8 could usecpu_has(cpu, X86_FEATURE_CPB);I'd still like to cache the
cpb_capablevalue locally instead of gettingx86_cpuinfopercpu var and querying it. Especially if this happens often and not only at driver init.
If it's a percpu var, isn't it local anyway?
Best,
Dominik
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
From: Dominik Brodowski <[email protected]>
Date: Tue, Mar 23, 2010 at 02:27:37PM +0100
Hi Dominik,
Quoted 9 lines · Borislav Petkov
Quoted 6 lines
Quoted 2 lines
It could already be set in
arch/x86/kernel/cpu/amd.cand powernow-k8 could usecpu_has(cpu, X86_FEATURE_CPB);I'd still like to cache the
cpb_capablevalue locally instead of gettingx86_cpuinfopercpu var and querying it. Especially if this happens often and not only at driver init.If it's a percpu var, isn't it local anyway?
I meant driver-local. So that I don't have to deref even the per_cpu var and thus save some cycles.
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
Hey Borislav,
Quoted 9 lines · Borislav Petkov
From: Dominik Brodowski <[email protected]>
Date: Tue, Mar 23, 2010 at 02:27:37PM +0100Hi Dominik,
Quoted 4 lines · Borislav Petkov
Quoted 3 lines
Quoted 2 lines
It could already be set in
arch/x86/kernel/cpu/amd.cand powernow-k8 could usecpu_has(cpu, X86_FEATURE_CPB);
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
I'd still like to cache the
cpb_capablevalue locally instead of gettingx86_cpuinfopercpu var and querying it. Especially if this happens often and not only at driver init.If it's a percpu var, isn't it local anyway?
I meant driver-local. So that I don't have to deref even the
per_cpuvar and thus save some cycles.
Well, it doesn't seem to be used in any hot path (and if it were, using a per-cpu var was better anyway, because of no contention etc.). If it really saves some cycles, I'm more than fine with keeping it; still, informing the user in /proc/cpuinfo seems like a sensible thing to do.
Best,
Dominik
Re: [PATCH 2/5] powernow-k8: Add core performance boost support
From: Dominik Brodowski <[email protected]>
Date: Tue, Mar 23, 2010 at 03:47:57PM +0100
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
If it's a percpu var, isn't it local anyway?
I meant driver-local. So that I don't have to deref even the
per_cpuvar and thus save some cycles.Well, it doesn't seem to be used in any hot path (and if it were, using a per-cpu var was better anyway, because of no contention etc.). If it really saves some cycles, I'm more than fine with keeping it; still, informing the user in
/proc/cpuinfoseems like a sensible thing to do.
No, the idea was to do the local caching _in addition_ to advertising it over /proc/cpuinfo. Let's see what the x86 maintainers think though...
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
PATCH 3/5 cpufreq: Add APERF/MPERF support for AMD processors
In reply to Borislav PetkovFrom: Mark Langsdorf <[email protected]>
Starting with model 10 of Family 0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.
--- arch/x86/kernel/cpu/amd.c | 6 +++ arch/x86/kernel/cpu/cpufreq/Makefile | 4 +- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 44 +----------------------- arch/x86/kernel/cpu/cpufreq/mperf.c | 50 ++++++++++++++++++++++++++++ arch/x86/kernel/cpu/cpufreq/mperf.h | 9 +++++ arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 8 ++++ 6 files changed, 77 insertions(+), 44 deletions(-) create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.h
arch/x86/kernel/cpu/amd.c +6 -0
@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_MFENCE_RDTSC ); } +if (c->cpuid_level >=6 ) { +unsigned ecx =cpuid_ecx (6 ); +if (ecx &0x01 ) +set_cpu_cap (c,X86_FEATURE_APERFMPERF ); + } +#ifdef CONFIG_X86_64 if (c->x86 ==0x10 ) {/* do this for boot cpu */
arch/x86/kernel/cpu/cpufreq/Makefile +2 -2
@@ -2,8 +2,8 @@ # K8 systems. ACPI is preferred to all other hardware-specific drivers. # speedstep-* is preferred over p4-clockmod. -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2 -42
68 lines not on this page · raw message
arch/x86/kernel/cpu/cpufreq/mperf.c new file +50 -0
50 lines not on this page · raw message
arch/x86/kernel/cpu/cpufreq/mperf.h new file +9 -0
@@ -0,0 +1,9 @@ +/* +* (c) 2010 Advanced Micro Devices, Inc. +* Your use of this code is subject to the terms and conditions of the +* GNU general public license version 2. See "COPYING" or +* http://www.gnu.org/licenses/gpl.html +*/ + +unsigned int cpufreq_get_measured_perf (struct cpufreq_policy *policy, +unsigned int cpu);
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +8 -0
@@ -45,6 +45,7 @@#define PFX "powernow-k8: "#define VERSION "version 2.20.00"#include "powernow-k8.h" +#include "mperf.h" /* serialize freq changes */ static DEFINE_MUTEX (fidvid_mutex);
@@ -57,6 +58,8 @@ static int cpu_family = CPU_OPTERON;static bool cpb_capable, cpb_disabled;static struct msr __percpu *msrs; +static struct cpufreq_driver cpufreq_amd64_driver; +#ifndef CONFIG_SMP static inline const struct cpumask *cpu_core_mask (int cpu) {
@@ -1251,6 +1254,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)struct powernow_k8_data *data;struct init_on_cpu init_on_cpu;int rc; +struct cpuinfo_x86 *c = &cpu_data (pol->cpu);if (!cpu_online (pol->cpu))return -ENODEV ;
@@ -1325,6 +1329,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)return -EINVAL ; } +/* Check for APERF/MPERF support in hardware */ +if (cpu_has (c,X86_FEATURE_APERFMPERF )) + cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; +cpufreq_frequency_table_get_attr (data->powernow_table, pol->cpu);if (cpu_family ==CPU_HW_PSTATE )
Signature · 1 line
1.7.0
Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors
Quoted 26 lines · On Monday 22 March 2010 19:38:39 Borislav Petkov wrote:
From: Mark Langsdorf <[email protected]>
Starting with model 10 of Family
0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.Signed-off-by Mark Langsdorf <[email protected]>Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/kernel/cpu/amd.c | 6 +++ arch/x86/kernel/cpu/cpufreq/Makefile | 4 +- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 44 +----------------------- arch/x86/kernel/cpu/cpufreq/mperf.c | 50 ++++++++++++++++++++++++++++ arch/x86/kernel/cpu/cpufreq/mperf.h | 9 +++++ arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 8 ++++ 6 files changed, 77 insertions(+), 44 deletions(-) create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.harch/x86/kernel/cpu/amd.c +0
-0
arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 544
Quoted 8 lines
arch/x86/kernel/cpu/amd.c +5
-0@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_MFENCE_RDTSC ); } +if (c->cpuid_level >=6 ) { +unsigned ecx =cpuid_ecx (6 ); +if (ecx &0x01 ) +set_cpu_cap (c,X86_FEATURE_APERFMPERF ); + }
This is nearly identical to (beside c->cpuid_level > 6), in arch/x86/kernel/cpu/intel.c:
if (c->cpuid_level > 6) {
unsigned ecx = cpuid_ecx(6);
if (ecx & 0x01)
set_cpu_cap(c, X86_FEATURE_APERFMPERF);
}I expect you are correct... or could it get moved to general x86 init code?
Thomas
Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:26:22PM +0100
Quoted 37 lines · On Monday 22 March 2010 19:38:39 Borislav Petkov wrote:
Quoted 26 lines
From: Mark Langsdorf <[email protected]>
Starting with model 10 of Family
0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.Signed-off-by Mark Langsdorf <[email protected]>Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/kernel/cpu/amd.c | 6 +++ arch/x86/kernel/cpu/cpufreq/Makefile | 4 +- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 44 +----------------------- arch/x86/kernel/cpu/cpufreq/mperf.c | 50 ++++++++++++++++++++++++++++ arch/x86/kernel/cpu/cpufreq/mperf.h | 9 +++++ arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 8 ++++ 6 files changed, 77 insertions(+), 44 deletions(-) create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.harch/x86/kernel/cpu/amd.c +0
-0arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 544
Quoted 8 lines
arch/x86/kernel/cpu/amd.c +5
-0@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_MFENCE_RDTSC ); } +if (c->cpuid_level >=6 ) { +unsigned ecx =cpuid_ecx (6 ); +if (ecx &0x01 ) +set_cpu_cap (c,X86_FEATURE_APERFMPERF ); + }This is nearly identical to (beside
c->cpuid_level> 6), inarch/x86/kernel/cpu/intel.c:
Quoted 6 lines
if (c->cpuid_level > 6) { unsigned ecx = cpuid_ecx(6); if (ecx & 0x01) set_cpu_cap(c, X86_FEATURE_APERFMPERF); }I expect you are correct... or could it get moved to general x86 init code?
Sounds good...
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
PATCH 4/5 powernow-k8: Fix frequency reporting
In reply to Borislav PetkovFrom: Mark Langsdorf <[email protected]>
With F10, model 10, all valid frequencies are in the ACPI _PST table.
--- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2 -1
@@ -935,7 +935,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, powernow_table[i].index = index;/* Frequency may be rounded for these */ -if (boot_cpu_data.x86 ==0x10 || boot_cpu_data.x86 ==0x11 ) { +if ((boot_cpu_data.x86 ==0x10 && boot_cpu_data.x86_model <10 ) + || boot_cpu_data.x86 ==0x11 ) { powernow_table[i].frequency =freq_from_fid_did (lo &0x3f , (lo >>6 ) &7 ); }else
Signature · 1 line
1.7.0
PATCH 5/5 cpufreq: Add support for actual freq
In reply to Borislav PetkovFrom: Borislav Petkov <[email protected]>
Modify the scaling_cur_freq interface to show the actual core frequency when boosting is supported and enabled on the core.
--- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 18 ++++++++++++++++++ drivers/cpufreq/cpufreq.c | 9 ++++++++- include/linux/cpufreq.h | 1 + 3 files changed, 27 insertions(+), 1 deletions(-)
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +18 -0
@@ -58,6 +58,8 @@ static int cpu_family = CPU_OPTERON;static bool cpb_capable, cpb_disabled;static struct msr __percpu *msrs; +static bool can_aperf_mperf; +static struct cpufreq_driver cpufreq_amd64_driver;#ifndef CONFIG_SMP
@@ -1465,6 +1467,18 @@ static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)define_one_freq_rw (cpb); +static ssize_t show_actual_freq (struct cpufreq_policy *policy,char *buf) +{ +unsigned long freq; + +if (can_aperf_mperf) + freq =cpufreq_get_measured_perf (policy, policy->cpu); +else + freq = policy->cur; + +return sprintf (buf,"%lu\n" , freq); +} +static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, &cpb,
@@ -1478,6 +1492,7 @@ static struct cpufreq_driver cpufreq_amd64_driver = { .init = powernowk8_cpu_init, .exit = __devexit_p(powernowk8_cpu_exit), .get = powernowk8_get, + .cur_freq = show_actual_freq, .name = "powernow-k8", .owner = THIS_MODULE, .attr = powernow_k8_attr,
@@ -1531,6 +1546,9 @@ static int __cpuinit powernowk8_init(void)printk (KERN_CONT "on.\n" ); } +if (boot_cpu_has (X86_FEATURE_APERFMPERF )) + can_aperf_mperf = true; +return cpufreq_register_driver (&cpufreq_amd64_driver); }
drivers/cpufreq/cpufreq.c +8 -1
@@ -457,7 +457,14 @@ show_one(cpuinfo_max_freq, cpuinfo.max_freq);show_one (cpuinfo_transition_latency, cpuinfo.transition_latency);show_one (scaling_min_freq, min);show_one (scaling_max_freq, max); -show_one (scaling_cur_freq, cur); + +static ssize_t show_scaling_cur_freq (struct cpufreq_policy *policy,char *buf) +{ +if (cpufreq_driver->cur_freq) +return cpufreq_driver->cur_freq (policy, buf); + +return sprintf (buf,"%u\n" , policy->cur); +}static int __cpufreq_set_policy (struct cpufreq_policy *data,struct cpufreq_policy *policy);
include/linux/cpufreq.h +1 -0
@@ -237,6 +237,7 @@ struct cpufreq_driver {int (*exit) (struct cpufreq_policy *policy);int (*suspend) (struct cpufreq_policy *policy,pm_message_t pmsg);int (*resume) (struct cpufreq_policy *policy); +ssize_t (*cur_freq) (struct cpufreq_policy *policy,char *buf);struct freq_attr **attr; };
Signature · 1 line
1.7.0
Re: [PATCH 5/5] cpufreq: Add support for actual freq
Quoted 4 lines · On Monday 22 March 2010 19:38:41 Borislav Petkov wrote:
From: Borislav Petkov <[email protected]>
Modify the
scaling_cur_freqinterface to show the actual core frequency when boosting is supported and enabled on the core.
This looks wrong.
scaling_cur freq should show the frequency the kernel/cpufreq subsystem thinks it's in.
You show the average freq and the time of the measured average frequency depends on when the cpufreq subsystem called getavg() the last time.
Also the time frame of the average freq the cpufreq subsystem gets when calling getavg() now depends on whether and how often userspace calls scaling_cur_freq which influences switching policy.
Latest cpufrequtils (ver 006) supports cpufreq-aperf to check whether cores enter boost mode. Len Brown afaik also has a userspace tool, but if it has any advantages, it should IMO get integrated into cpufrequtils which people know to use when looking at cpufreq.
I once thought about adding scaling_avg_freq which gets an own aperf_mperf counter, but you don't know whether another app read out the average freq in between and your expected measured time frame is wrong then. You could remember aperf/mperf per pid and free the saved aperf/mperf value if the process dies..., but what for if this can be read out in userspace.
Thomas
Re: [PATCH 5/5] cpufreq: Add support for actual freq
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:51:18PM +0100
Hi,
Quoted 2 lines
scaling_curfreq should show the frequency the kernel/cpufreq subsystem thinks it's in.
Well, we have also /sys/devices/system/cpu/cpu<NUM>/cpufreq/cpuinfo_cur_freq and it reads also policy->cur. Why not show the actual frequency in scaling_cur_freq then?
Quoted 12 lines
You show the average freq and the time of the measured average frequency depends on when the cpufreq subsystem called
getavg()the last time.
Also the time frame of the average freq the cpufreq subsystem gets when callinggetavg()now depends on whether and how often userspace callsscaling_cur_freqwhich influences switching policy.Latest cpufrequtils (ver 006) supports cpufreq-aperf to check whether cores enter boost mode. Len Brown afaik also has a userspace tool, but if it has any advantages, it should IMO get integrated into cpufrequtils which people know to use when looking at cpufreq.
Quoted 5 lines
I once thought about adding
scaling_avg_freqwhich gets an ownaperf_mperfcounter, but you don't know whether another app read out the average freq in between and your expected measured time frame is wrong then. You could remember aperf/mperf per pid and free the saved aperf/mperf value if the process dies..., but what for if this can be read out in userspace.
Ah yes, I see what you mean. Yet, I still don't like the idea of having to use a special userspace tool just to read the actual frequency. How about we hook into <drivers/cpufreq/cpufreq_ondemand.c:dbs_check_cpu()> and passively output the freq_avg after being computed in
freq_avg = __cpufreq_driver_getavg(policy, j);
if (freq_avg <= 0)
freq_avg = policy->cur;through sysfs. Hmm...?
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center
Re: [PATCH 5/5] cpufreq: Add support for actual freq
Hey,
Quoted 6 lines · Borislav Petkov
Quoted 2 lines
scaling_curfreq should show the frequency the kernel/cpufreq subsystem thinks it's in.Well, we have also /sys/devices/system/cpu/cpu<NUM>/cpufreq/cpuinfo_cur_freq and it reads also
policy->cur.
No. cpuinfo_cur_freq calls __cpufreq_get() which itself calls the driver's ->get() callback, which is exactly for determining the current frequency. I assume CPUFREQ_CONST_LOOP is set, else we'd get into trouble; but as long as that's the case I see no problem in using ->get() / cpuinfo_cur_freq to read out the current actual frequency.
Quoted 1 line
Why not show the actual frequency in
scaling_cur_freqthen?
Quoting Documentation/cpu-freq/user-guide.txt :
cpuinfo_cur_freq : Current frequency of the CPU as obtained from
the hardware, in KHz. This is the frequency the CPU actually runs at.
scaling_cur_freq : Current frequency of the CPU as determined by
the governor and cpufreq core, in KHz. This is the frequency the kernel thinks the CPU runs at.
So scaling_cur_freq may not be mis-used for this; cpuinfo_cur_freq may be used for it, though. IMVHO.
Best,
Dominik
Re: [PATCH 5/5] cpufreq: Add support for actual freq
In reply to Borislav PetkovQuoted 36 lines · On Tuesday 23 March 2010 15:23:49 Borislav Petkov wrote:
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 12:51:18PM +0100Hi,
Quoted 2 lines
scaling_curfreq should show the frequency the kernel/cpufreq subsystem thinks it's in.Well, we have also /sys/devices/system/cpu/cpu<NUM>/cpufreq/cpuinfo_cur_freq and it reads also
policy->cur. Why not show the actual frequency inscaling_cur_freqthen?Quoted 12 lines
You show the average freq and the time of the measured average frequency depends on when the cpufreq subsystem called
getavg()the last time.
Also the time frame of the average freq the cpufreq subsystem gets when callinggetavg()now depends on whether and how often userspace callsscaling_cur_freqwhich influences switching policy.Latest cpufrequtils (ver 006) supports cpufreq-aperf to check whether cores enter boost mode. Len Brown afaik also has a userspace tool, but if it has any advantages, it should IMO get integrated into cpufrequtils which people know to use when looking at cpufreq.
Quoted 5 lines
I once thought about adding
scaling_avg_freqwhich gets an ownaperf_mperfcounter, but you don't know whether another app read out the average freq in between and your expected measured time frame is wrong then. You could remember aperf/mperf per pid and free the saved aperf/mperf value if the process dies..., but what for if this can be read out in userspace.Ah yes, I see what you mean. Yet, I still don't like the idea of having to use a special userspace tool just to read the actual frequency. How about we hook into <drivers/cpufreq/cpufreq_ondemand.c:dbs_check_cpu()> and passively output the
freq_avgafter being computed in
Quoted 5 lines
freq_avg = __cpufreq_driver_getavg(policy, j); if (freq_avg <= 0) freq_avg = policy->cur;through sysfs. Hmm...?
But what data would you get then? It's defintely not cur_freq. It's some kind of average, but you don't know the time frame.
I posted a solution with an extra aperf/mperf save for scaling_avg_freq (or similar).
First read would return nothing valid.
cat scaling_avg_freq > /dev/null
watch -n1 cat scaling_avg_freq
would return the average freq of the last seconds, exactly the same what you can do with cpufreq-aperf from userspace.
But if another user app does the same, it's messed up.
You can find out the pid of the process doing the cat and remember aperf/mperf for it if it does not exist yet..., but now it gets to a point where cpufreq-aperf is really more convenient and straight foward.
Possibly documenting cpufreq-aperf in Documentation/cpu-freq would be worth it. Also mentioning "boost" somewhere would be great:
grep -i boost Documentation/cpu-freq/ -r Documentation/cpu-freq/pcc-cpufreq.txt:This is due to "turbo boost" ...
Another idea is to have a separate cpufreq_avg_freq and update it on every target() call, but that's overhead...
Thomas
Re: [PATCH 5/5] cpufreq: Add support for actual freq
From: Thomas Renninger <[email protected]>
Date: Tue, Mar 23, 2010 at 04:12:18PM +0100
Hi Thomas,
Quoted 7 lines
would return the average freq of the last seconds, exactly the same what you can do with cpufreq-aperf from userspace.
But if another user app does the same, it's messed up.
You can find out the pid of the process doing the cat and remember aperf/mperf for it if it does not exist yet..., but now it gets to a point where cpufreq-aperf is really more convenient and straight foward.
Quoted 7 lines
Possibly documenting cpufreq-aperf in
Documentation/cpu-freqwould be worth it. Also mentioning "boost" somewhere would be great:
grep -i boostDocumentation/cpu-freq/-r Documentation/cpu-freq/pcc-cpufreq.txt:This is due to "turbo boost" ...Another idea is to have a separate
cpufreq_avg_freqand update it on everytarget()call, but that's overhead...
you got me persuaded - if we want to have the effective frequency reported in the kernel, we have to come up with a slick solution that wouldn't incur overhead and won't be disrupted by others accessing those MSRs. Let's leave it to cpufreq-aperf for now and revisit this when needed.
Thanks.
Signature · 6 lines
Regards/Gruss, Boris. -- Advanced Micro Devices, Inc. Operating Systems Research Center