Skip to contentSkip to conversation

net: remove trailing spaces in messages

PATCH In review Frans Pop 4 participants 15 messages Mar 24, 2010

Subsystems (6)
lore
Share & tools
lore

Frans Pop

author
#0 lore raw

cover net: remove trailing spaces in messages

This is the third patchset to remove trailing spaces in kernel messages. Patches in this set cover wireless code.

Note that the last patch for libertas changes a debugfs header and not actually a message.

Patches have been rebased against current net-next.

Benefits are:
- general cleanup and consistency
- minor reduction in kernel size and user's log file size
- reduced annoyance for people writing logcheck rules

Shortstat:

 30 files changed, 124 insertions(+), 124 deletions(-)

Frans Pop (7):
wireless: remove trailing space in messages wireless/ath: remove trailing space in messages wireless/ipw2x00: remove trailing space in messages wireless/iwlwifi: remove trailing space in messages wireless/prism54: remove trailing space in messages wireless/raylink: remove trailing space in messages wireless/libertas: remove trailing space in debugfs header

Cheers,
FJP

author
#1 lore raw

PATCH 1/7 wireless: remove trailing space in messages

Also correct indentation in net/wireless/reg.c.

---
 net/mac80211/agg-tx.c |    4 ++--
 net/wireless/reg.c    |    6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)
net/mac80211/agg-tx.c +2 -2
index 5538e1b..bb4ac70 100644
@@ -414,7 +414,7 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 					 struct sta_info *sta, u16 tid)
 {
 #ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid);
+	printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid);
 #endif
 
 	spin_lock(&local->ampdu_lock);
@@ -674,7 +674,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 	del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
+	printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
 	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
net/wireless/reg.c +3 -3
index ed89c59..e857d72 100644
@@ -2357,10 +2357,10 @@ static void print_regdomain(const struct ieee80211_regdomain *rd)
 					rdev->country_ie_alpha2[1]);
 			} else
 				printk(KERN_INFO "cfg80211: Current regulatory "
-					"domain intersected: \n");
+					"domain intersected:\n");
 		} else
-				printk(KERN_INFO "cfg80211: Current regulatory "
-					"domain intersected: \n");
+			printk(KERN_INFO "cfg80211: Current regulatory "
+				"domain intersected:\n");
 	} else if (is_world_regdom(rd->alpha2))
 		printk(KERN_INFO "cfg80211: World regulatory "
 			"domain updated:\n");
Signature · 1 line
1.6.6.1
author
#2 lore raw

PATCH 2/7 wireless/ath: remove trailing space in messages

In reply to Frans Pop
Cc Luis R. Rodriguez <[email protected]>
---
 drivers/net/wireless/ath/ar9170/main.c       |    8 ++++----
 drivers/net/wireless/ath/ath9k/debug.c       |    4 ++--
 drivers/net/wireless/ath/ath9k/eeprom_4k.c   |    2 +-
 drivers/net/wireless/ath/ath9k/eeprom_9287.c |    2 +-
 drivers/net/wireless/ath/ath9k/gpio.c        |    2 +-
 5 files changed, 9 insertions(+), 9 deletions(-)
drivers/net/wireless/ath/ar9170/main.c +4 -4
index 257c734..43b67c0 100644
@@ -235,7 +235,7 @@ static void __ar9170_dump_txqueue(struct ar9170 *ar,
 	       wiphy_name(ar->hw->wiphy), skb_queue_len(queue));
 
 	skb_queue_walk(queue, skb) {
-		printk(KERN_DEBUG "index:%d => \n", i++);
+		printk(KERN_DEBUG "index:%d =>\n", i++);
 		ar9170_print_txheader(ar, skb);
 	}
 	if (i != skb_queue_len(queue))
@@ -280,7 +280,7 @@ static void ar9170_dump_tx_status_ampdu(struct ar9170 *ar)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ar->tx_status_ampdu.lock, flags);
-	printk(KERN_DEBUG "%s: A-MPDU tx_status queue => \n",
+	printk(KERN_DEBUG "%s: A-MPDU tx_status queue =>\n",
 	       wiphy_name(ar->hw->wiphy));
 	__ar9170_dump_txqueue(ar, &ar->tx_status_ampdu);
 	spin_unlock_irqrestore(&ar->tx_status_ampdu.lock, flags);
@@ -307,7 +307,7 @@ static void ar9170_recycle_expired(struct ar9170 *ar,
 		if (time_is_before_jiffies(arinfo->timeout)) {
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: [%ld > %ld] frame expired => "
-			       "recycle \n", wiphy_name(ar->hw->wiphy),
+			       "recycle\n", wiphy_name(ar->hw->wiphy),
 			       jiffies, arinfo->timeout);
 			ar9170_print_txheader(ar, skb);
 #endif /* AR9170_QUEUE_DEBUG */
@@ -1727,7 +1727,7 @@ static void ar9170_tx(struct ar9170 *ar)
 			printk(KERN_DEBUG "%s: queue %d full\n",
 			       wiphy_name(ar->hw->wiphy), i);
 
-			printk(KERN_DEBUG "%s: stuck frames: ===> \n",
+			printk(KERN_DEBUG "%s: stuck frames: ===>\n",
 			       wiphy_name(ar->hw->wiphy));
 			ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
 			ar9170_dump_txqueue(ar, &ar->tx_status[i]);
drivers/net/wireless/ath/ath9k/debug.c +2 -2
index 42d2a50..15d9ac8 100644
@@ -156,10 +156,10 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 		"txfifo_dcu_num_0:   %2d    txfifo_dcu_num_1:       %2d\n",
 		(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
 
-	len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x \n",
+	len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x\n",
 			REG_READ_D(ah, AR_OBS_BUS_1));
 	len += snprintf(buf + len, DMA_BUF_LEN - len,
-			"AR_CR: 0x%x \n", REG_READ_D(ah, AR_CR));
+			"AR_CR: 0x%x\n", REG_READ_D(ah, AR_CR));
 
 	ath9k_ps_restore(sc);
 
drivers/net/wireless/ath/ath9k/eeprom_4k.c +1 -1
index 68db166..0354fe5 100644
@@ -43,7 +43,7 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
 		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc, eep_data)) {
 			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region \n");
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
drivers/net/wireless/ath/ath9k/eeprom_9287.c +1 -1
index 839d05a..d8ca94c 100644
@@ -44,7 +44,7 @@ static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
 		if (!ath9k_hw_nvram_read(common,
 					 addr + eep_start_loc, eep_data)) {
 			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region \n");
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
drivers/net/wireless/ath/ath9k/gpio.c +1 -1
index deab8be..c2c3090 100644
@@ -364,7 +364,7 @@ static void ath_btcoex_no_stomp_timer(void *arg)
 	bool is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
 
 	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "no stomp timer running \n");
+		  "no stomp timer running\n");
 
 	spin_lock_bh(&btcoex->btcoex_lock);
 
Signature · 1 line
1.6.6.1
author
#4 lore raw

PATCH 3/7 wireless/ipw2x00: remove trailing space in messages

In reply to Frans Pop
---
 drivers/net/wireless/ipw2x00/ipw2100.c |   38 ++++++++--------
 drivers/net/wireless/ipw2x00/ipw2200.c |   74 ++++++++++++++++----------------
 2 files changed, 56 insertions(+), 56 deletions(-)
drivers/net/wireless/ipw2x00/ipw2100.c +19 -19
index fe63bf2..2088ac0 100644
@@ -2140,7 +2140,7 @@ static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
 	DECLARE_SSID_BUF(ssid);
 
 	IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
-		  "disassociated: '%s' %pM \n",
+		  "disassociated: '%s' %pM\n",
 		  print_ssid(ssid, priv->essid, priv->essid_len),
 		  priv->bssid);
 
@@ -3285,7 +3285,7 @@ static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
 
 	if (inta & IPW2100_INTA_PARITY_ERROR) {
 		printk(KERN_ERR DRV_NAME
-		       ": ***** PARITY ERROR INTERRUPT !!!! \n");
+		       ": ***** PARITY ERROR INTERRUPT !!!!\n");
 		priv->inta_other++;
 		write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
 	}
@@ -6753,7 +6753,7 @@ static int ipw2100_wx_set_freq(struct net_device *dev,
 		err = -EOPNOTSUPP;
 		goto done;
 	} else {		/* Set the channel */
-		IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
+		IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq->m);
 		err = ipw2100_set_channel(priv, fwrq->m, 0);
 	}
 
@@ -6782,7 +6782,7 @@ static int ipw2100_wx_get_freq(struct net_device *dev,
 	else
 		wrqu->freq.m = 0;
 
-	IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
+	IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv->channel);
 	return 0;
 
 }
@@ -6794,7 +6794,7 @@ static int ipw2100_wx_set_mode(struct net_device *dev,
 	struct ipw2100_priv *priv = libipw_priv(dev);
 	int err = 0;
 
-	IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
+	IPW_DEBUG_WX("SET Mode -> %d\n", wrqu->mode);
 
 	if (wrqu->mode == priv->ieee->iw_mode)
 		return 0;
@@ -7149,7 +7149,7 @@ static int ipw2100_wx_set_nick(struct net_device *dev,
 	memset(priv->nick, 0, sizeof(priv->nick));
 	memcpy(priv->nick, extra, wrqu->data.length);
 
-	IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
+	IPW_DEBUG_WX("SET Nickname -> %s\n", priv->nick);
 
 	return 0;
 }
@@ -7168,7 +7168,7 @@ static int ipw2100_wx_get_nick(struct net_device *dev,
 	memcpy(extra, priv->nick, wrqu->data.length);
 	wrqu->data.flags = 1;	/* active */
 
-	IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
+	IPW_DEBUG_WX("GET Nickname -> %s\n", extra);
 
 	return 0;
 }
@@ -7207,7 +7207,7 @@ static int ipw2100_wx_set_rate(struct net_device *dev,
 
 	err = ipw2100_set_tx_rates(priv, rate, 0);
 
-	IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
+	IPW_DEBUG_WX("SET Rate -> %04X\n", rate);
       done:
 	mutex_unlock(&priv->action_mutex);
 	return err;
@@ -7258,7 +7258,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
 		wrqu->bitrate.value = 0;
 	}
 
-	IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
+	IPW_DEBUG_WX("GET Rate -> %d\n", wrqu->bitrate.value);
 
       done:
 	mutex_unlock(&priv->action_mutex);
@@ -7294,7 +7294,7 @@ static int ipw2100_wx_set_rts(struct net_device *dev,
 
 	err = ipw2100_set_rts_threshold(priv, value);
 
-	IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
+	IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value);
       done:
 	mutex_unlock(&priv->action_mutex);
 	return err;
@@ -7316,7 +7316,7 @@ static int ipw2100_wx_get_rts(struct net_device *dev,
 	/* If RTS is set to the default value, then it is disabled */
 	wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
 
-	IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
+	IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu->rts.value);
 
 	return 0;
 }
@@ -7355,7 +7355,7 @@ static int ipw2100_wx_set_txpow(struct net_device *dev,
 
 	err = ipw2100_set_tx_power(priv, value);
 
-	IPW_DEBUG_WX("SET TX Power -> %d \n", value);
+	IPW_DEBUG_WX("SET TX Power -> %d\n", value);
 
       done:
 	mutex_unlock(&priv->action_mutex);
@@ -7384,7 +7384,7 @@ static int ipw2100_wx_get_txpow(struct net_device *dev,
 
 	wrqu->txpower.flags = IW_TXPOW_DBM;
 
-	IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
+	IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu->txpower.value);
 
 	return 0;
 }
@@ -7414,7 +7414,7 @@ static int ipw2100_wx_set_frag(struct net_device *dev,
 		priv->frag_threshold = priv->ieee->fts;
 	}
 
-	IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
+	IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv->ieee->fts);
 
 	return 0;
 }
@@ -7432,7 +7432,7 @@ static int ipw2100_wx_get_frag(struct net_device *dev,
 	wrqu->frag.fixed = 0;	/* no auto select */
 	wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
 
-	IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
+	IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu->frag.value);
 
 	return 0;
 }
@@ -7458,14 +7458,14 @@ static int ipw2100_wx_set_retry(struct net_device *dev,
 
 	if (wrqu->retry.flags & IW_RETRY_SHORT) {
 		err = ipw2100_set_short_retry(priv, wrqu->retry.value);
-		IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
+		IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
 			     wrqu->retry.value);
 		goto done;
 	}
 
 	if (wrqu->retry.flags & IW_RETRY_LONG) {
 		err = ipw2100_set_long_retry(priv, wrqu->retry.value);
-		IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
+		IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
 			     wrqu->retry.value);
 		goto done;
 	}
@@ -7474,7 +7474,7 @@ static int ipw2100_wx_set_retry(struct net_device *dev,
 	if (!err)
 		err = ipw2100_set_long_retry(priv, wrqu->retry.value);
 
-	IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
+	IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu->retry.value);
 
       done:
 	mutex_unlock(&priv->action_mutex);
@@ -7508,7 +7508,7 @@ static int ipw2100_wx_get_retry(struct net_device *dev,
 		wrqu->retry.value = priv->short_retry_limit;
 	}
 
-	IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
+	IPW_DEBUG_WX("GET Retry -> %d\n", wrqu->retry.value);
 
 	return 0;
 }
drivers/net/wireless/ipw2x00/ipw2200.c +37 -37

283 lines not on this page · raw message

Signature · 1 line
1.6.6.1
author
#5 lore raw

PATCH 4/7 wireless/iwlwifi: remove trailing space in messages

In reply to Frans Pop

Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed().

Cc Zhu Yi <[email protected]>
Cc Reinette Chatre <[email protected]>
Cc Intel Linux Wireless <[email protected]>

wireless/intel

---
 drivers/net/wireless/iwlwifi/iwl-3945.c     |    4 ++--
 drivers/net/wireless/iwlwifi/iwl-4965.c     |   12 ++++++------
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c   |    2 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c      |    2 +-
 drivers/net/wireless/iwlwifi/iwl-calib.c    |    2 +-
 drivers/net/wireless/iwlwifi/iwl-core.c     |    6 +++---
 drivers/net/wireless/iwlwifi/iwl-hcmd.c     |    4 ++--
 drivers/net/wireless/iwlwifi/iwl-io.h       |    2 +-
 drivers/net/wireless/iwlwifi/iwl-power.c    |    2 +-
 drivers/net/wireless/iwlwifi/iwl-rx.c       |    2 +-
 drivers/net/wireless/iwlwifi/iwl-scan.c     |    2 +-
 drivers/net/wireless/iwlwifi/iwl-sta.c      |    4 ++--
 drivers/net/wireless/iwlwifi/iwl-tx.c       |    8 ++++----
 drivers/net/wireless/iwlwifi/iwl3945-base.c |    6 +++---
 14 files changed, 29 insertions(+), 29 deletions(-)
drivers/net/wireless/iwlwifi/iwl-3945.c +2 -2
index 12a42fc..e3e5399 100644
@@ -486,7 +486,7 @@ static void _iwl3945_dbg_report_frame(struct iwl_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%d,\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, rate);
 		else {
@@ -1049,7 +1049,7 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
-		IWL_DEBUG_INFO(priv, "RTP type \n");
+		IWL_DEBUG_INFO(priv, "RTP type\n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
 		IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
drivers/net/wireless/iwlwifi/iwl-4965.c +6 -6
index 644aacf..ee85e5a 100644
@@ -417,7 +417,7 @@ static void iwl4965_gain_computation(struct iwl_priv *priv,
 				      sizeof(cmd), &cmd);
 		if (ret)
 			IWL_DEBUG_CALIB(priv, "fail sending cmd "
-				     "REPLY_PHY_CALIBRATION_CMD \n");
+				     "REPLY_PHY_CALIBRATION_CMD\n");
 
 		/* TODO we might want recalculate
 		 * rx_chain in rxon cmd */
@@ -1619,19 +1619,19 @@ static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
 
 	/* get absolute value */
 	if (temp_diff < 0) {
-		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
 		temp_diff = -temp_diff;
 	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER(priv, "Same temp, \n");
+		IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
 	else
-		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
 
 	if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
-		IWL_DEBUG_POWER(priv, "Thermal txpower calib not needed\n");
+		IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
 		return 0;
 	}
 
-	IWL_DEBUG_POWER(priv, "Thermal txpower calib needed\n");
+	IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
 
 	return 1;
 }
drivers/net/wireless/iwlwifi/iwl-agn-rs.c +1 -1
index 84271cc..eebc32c 100644
@@ -2004,7 +2004,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 	/* rates available for this association, and for modulation mode */
 	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
 
-	IWL_DEBUG_RATE(priv, "mask 0x%04X \n", rate_mask);
+	IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
 
 	/* mask with station rate restriction */
 	if (is_legacy(tbl->lq_type)) {
drivers/net/wireless/iwlwifi/iwl-agn.c +1 -1
index efee4e3..5438956 100644
@@ -2271,7 +2271,7 @@ static int iwl_prepare_card_hw(struct iwl_priv *priv)
 {
 	int ret = 0;
 
-	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
+	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
 
 	ret = iwl_set_hw_ready(priv);
 	if (priv->hw_ready)
drivers/net/wireless/iwlwifi/iwl-calib.c +1 -1
index 845831a..dbb50a8 100644
@@ -592,7 +592,7 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv,
 	IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
 
 	if (!rx_enable_time) {
-		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0! \n");
+		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
 		return;
 	}
 
drivers/net/wireless/iwlwifi/iwl-core.c +3 -3
index ec435e5..cb2149f 100644
@@ -444,7 +444,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 			priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 		}
 	}
-	IWL_DEBUG_QOS(priv, "set QoS to default \n");
+	IWL_DEBUG_QOS(priv, "set QoS to default\n");
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -2009,7 +2009,7 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	struct ieee80211_sta *sta;
 
-	IWL_DEBUG_MAC80211(priv, "enter: \n");
+	IWL_DEBUG_MAC80211(priv, "enter:\n");
 
 	if (!ht_conf->is_ht)
 		return;
@@ -2567,7 +2567,7 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
 			sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
 			GFP_KERNEL);
 	if (!priv->txq) {
-		IWL_ERR(priv, "Not enough memory for txq \n");
+		IWL_ERR(priv, "Not enough memory for txq\n");
 		return -ENOMEM;
 	}
 	return 0;
drivers/net/wireless/iwlwifi/iwl-hcmd.c +2 -2
index 73681c4..51f89e7 100644
@@ -169,7 +169,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	mutex_lock(&priv->sync_cmd_mutex);
 
 	set_bit(STATUS_HCMD_ACTIVE, &priv->status);
-	IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s \n",
+	IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s\n",
 			get_cmd_string(cmd->id));
 
 	cmd_idx = iwl_enqueue_hcmd(priv, cmd);
@@ -191,7 +191,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 				jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
 
 			clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-			IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+			IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
 				       get_cmd_string(cmd->id));
 			ret = -ETIMEDOUT;
 			goto cancel;
drivers/net/wireless/iwlwifi/iwl-io.h +1 -1
index c719baf..4f54a5f 100644
@@ -297,7 +297,7 @@ static inline u32 __iwl_read_direct32(const char *f, u32 l,
 					struct iwl_priv *priv, u32 reg)
 {
 	u32 value = _iwl_read_direct32(priv, reg);
-	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
+	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d\n", reg, value,
 		     f, l);
 	return value;
 }
drivers/net/wireless/iwlwifi/iwl-power.c +1 -1
index 1a1a9f0..21222c6 100644
@@ -874,7 +874,7 @@ void iwl_tt_initialize(struct iwl_priv *priv)
 	int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
 	struct iwl_tt_trans *transaction;
 
-	IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
+	IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling\n");
 
 	memset(tt, 0, sizeof(struct iwl_tt_mgmt));
 
drivers/net/wireless/iwlwifi/iwl-rx.c +1 -1
index 8116aa0..7db6c41 100644
@@ -844,7 +844,7 @@ static void iwl_dbg_report_frame(struct iwl_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%u,\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, bitrate);
 		else {
drivers/net/wireless/iwlwifi/iwl-scan.c +1 -1
index 84b19b1..8d414ac 100644
@@ -453,7 +453,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 		added++;
 	}
 
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
 	return added;
 }
 
drivers/net/wireless/iwlwifi/iwl-sta.c +2 -2
index b1aad30..0457d93 100644
@@ -132,7 +132,7 @@ static void iwl_process_add_sta_resp(struct iwl_priv *priv,
 			sta_id);
 		break;
 	case ADD_STA_MODIFY_NON_EXIST_STA:
-		IWL_ERR(priv, "Attempting to modify non-existing station %d \n",
+		IWL_ERR(priv, "Attempting to modify non-existing station %d\n",
 			sta_id);
 		break;
 	default:
@@ -885,7 +885,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled.\n");
 		spin_unlock_irqrestore(&priv->sta_lock, flags);
 		return 0;
 	}
drivers/net/wireless/iwlwifi/iwl-tx.c +4 -4
index d6222aa..c4fc552 100644
@@ -964,9 +964,9 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
 	tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
 
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
@@ -1283,7 +1283,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 
 	if (!(meta->flags & CMD_ASYNC)) {
 		clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
 			       get_cmd_string(cmd->hdr.cmd));
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
@@ -1588,7 +1588,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 			   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
 			   ba_resp->scd_flow,
 			   ba_resp->scd_ssn);
-	IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n",
+	IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx\n",
 			   agg->start_idx,
 			   (unsigned long long)agg->bitmap);
 
drivers/net/wireless/iwlwifi/iwl3945-base.c +3 -3
index 2579bbc..c21a498 100644
@@ -597,9 +597,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		txq->need_update = 0;
 	}
 
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
 	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
 			   ieee80211_hdrlen(fc));
@@ -1937,7 +1937,7 @@ static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 		added++;
 	}
 
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
 	return added;
 }
 
Signature · 1 line
1.6.6.1
#6 lore raw

Re: [PATCH 4/7] wireless/iwlwifi: remove trailing space in messages

Hi Frans,

Quoted 9 lines · Frans Pop

Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed().

Cc Zhu Yi <[email protected]>
Cc Reinette Chatre <[email protected]>
Cc Intel Linux Wireless <[email protected]>

wireless/intel

Since this patch touches so many things, would it be possible to base your patch on
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
instead? We currently have some code reorganization pending there that is undergoing validation before we push it upstream. If you do so you can send the patch to me indicating so and I will push it upstream as part of our process to ensure there are no conflicts ahead.

Thank you

Reinette

author
#7 lore raw

Re: [PATCH 4/7] wireless/iwlwifi: remove trailing space in messages

Quoted 4 lines · reinette chatre

Since this patch touches so many things, would it be possible to base your patch on
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
instead?

Sure. Which branch?

#8 lore raw

Re: [PATCH 4/7] wireless/iwlwifi: remove trailing space in messages

Quoted 7 lines · Frans Pop
Quoted 4 lines · reinette chatre

Since this patch touches so many things, would it be possible to base your patch on
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
instead?

Sure. Which branch?

master

Thank you very much

Reinette

author
#9 lore raw

Re: [PATCH 4/7 v2] wireless/iwlwifi: remove trailing space in messages

In reply to Frans Pop

Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed().

Cc Zhu Yi <[email protected]>
Cc Reinette Chatre <[email protected]>
Cc Intel Linux Wireless <[email protected]>

---

Rebased against and updated for iwlwifi-2.6.git/master as requested by Reinette.

drivers/net/wireless/iwlwifi/iwl-3945-rs.c +1 -1
index 605aca4..9e411dc 100644
@@ -341,7 +341,7 @@ void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 s
 	struct ieee80211_supported_band *sband;
 	int i;
 
-	IWL_DEBUG_INFO(priv, "enter \n");
+	IWL_DEBUG_INFO(priv, "enter\n");
 	if (sta_id == priv->hw_params.bcast_sta_id)
 		goto out;
 
drivers/net/wireless/iwlwifi/iwl-3945.c +2 -2
index 6d5e170..175709e 100644
@@ -486,7 +486,7 @@ static void _iwl3945_dbg_report_frame(struct iwl_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%d,\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, rate);
 		else {
@@ -1023,7 +1023,7 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
-		IWL_DEBUG_INFO(priv, "RTP type \n");
+		IWL_DEBUG_INFO(priv, "RTP type\n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
 		IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
drivers/net/wireless/iwlwifi/iwl-4965.c +6 -6
index aea5519..b4978e5 100644
@@ -410,7 +410,7 @@ static void iwl4965_gain_computation(struct iwl_priv *priv,
 				      sizeof(cmd), &cmd);
 		if (ret)
 			IWL_DEBUG_CALIB(priv, "fail sending cmd "
-				     "REPLY_PHY_CALIBRATION_CMD \n");
+				     "REPLY_PHY_CALIBRATION_CMD\n");
 
 		/* TODO we might want recalculate
 		 * rx_chain in rxon cmd */
@@ -1612,19 +1612,19 @@ static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
 
 	/* get absolute value */
 	if (temp_diff < 0) {
-		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
 		temp_diff = -temp_diff;
 	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER(priv, "Same temp, \n");
+		IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
 	else
-		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d, \n", temp_diff);
+		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
 
 	if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
-		IWL_DEBUG_POWER(priv, "Thermal txpower calib not needed\n");
+		IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
 		return 0;
 	}
 
-	IWL_DEBUG_POWER(priv, "Thermal txpower calib needed\n");
+	IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
 
 	return 1;
 }
drivers/net/wireless/iwlwifi/iwl-agn-lib.c +1 -1
index 623aa71..d13fb8d 100644
@@ -854,7 +854,7 @@ static void iwlagn_dbg_report_frame(struct iwl_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%u,\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, bitrate);
 		else {
drivers/net/wireless/iwlwifi/iwl-agn-rs.c +1 -1
index 06b8792..0c3c768 100644
@@ -2002,7 +2002,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 	/* rates available for this association, and for modulation mode */
 	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
 
-	IWL_DEBUG_RATE(priv, "mask 0x%04X \n", rate_mask);
+	IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
 
 	/* mask with station rate restriction */
 	if (is_legacy(tbl->lq_type)) {
drivers/net/wireless/iwlwifi/iwl-agn-tx.c +3 -3
index c14e2bf..94aab6a 100644
@@ -723,9 +723,9 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
 	tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
 
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
@@ -1308,7 +1308,7 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
 			   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
 			   ba_resp->scd_flow,
 			   ba_resp->scd_ssn);
-	IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n",
+	IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx\n",
 			   agg->start_idx,
 			   (unsigned long long)agg->bitmap);
 
drivers/net/wireless/iwlwifi/iwl-agn.c +3 -3
index 6aec77f..1629b4d 100644
@@ -181,7 +181,7 @@ int iwl_commit_rxon(struct iwl_priv *priv)
 			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
 			return ret;
 		}
-		IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON. \n");
+		IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
 		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 		iwl_clear_ucode_stations(priv, false);
 		iwl_restore_stations(priv);
@@ -2310,7 +2310,7 @@ static int iwl_prepare_card_hw(struct iwl_priv *priv)
 {
 	int ret = 0;
 
-	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
+	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
 
 	ret = iwl_set_hw_ready(priv);
 	if (priv->hw_ready)
@@ -3084,7 +3084,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
 	iwl_restore_wepkeys(priv);
 
 	/* Initialize rate scaling */
-	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
+	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl_rs_rate_init(priv, sta, sta_id);
 
drivers/net/wireless/iwlwifi/iwl-calib.c +1 -1
index 845831a..dbb50a8 100644
@@ -592,7 +592,7 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv,
 	IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
 
 	if (!rx_enable_time) {
-		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0! \n");
+		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
 		return;
 	}
 
drivers/net/wireless/iwlwifi/iwl-core.c +3 -3
index 1b4408a..3c8ec6e 100644
@@ -348,7 +348,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 			priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 		}
 	}
-	IWL_DEBUG_QOS(priv, "set QoS to default \n");
+	IWL_DEBUG_QOS(priv, "set QoS to default\n");
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -1914,7 +1914,7 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	struct ieee80211_sta *sta;
 
-	IWL_DEBUG_MAC80211(priv, "enter: \n");
+	IWL_DEBUG_MAC80211(priv, "enter:\n");
 
 	if (!ht_conf->is_ht)
 		return;
@@ -2475,7 +2475,7 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
 			sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
 			GFP_KERNEL);
 	if (!priv->txq) {
-		IWL_ERR(priv, "Not enough memory for txq \n");
+		IWL_ERR(priv, "Not enough memory for txq\n");
 		return -ENOMEM;
 	}
 	return 0;
drivers/net/wireless/iwlwifi/iwl-hcmd.c +2 -2
index 73681c4..51f89e7 100644
@@ -169,7 +169,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	mutex_lock(&priv->sync_cmd_mutex);
 
 	set_bit(STATUS_HCMD_ACTIVE, &priv->status);
-	IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s \n",
+	IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s\n",
 			get_cmd_string(cmd->id));
 
 	cmd_idx = iwl_enqueue_hcmd(priv, cmd);
@@ -191,7 +191,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 				jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
 
 			clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-			IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+			IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
 				       get_cmd_string(cmd->id));
 			ret = -ETIMEDOUT;
 			goto cancel;
drivers/net/wireless/iwlwifi/iwl-io.h +1 -1
index c719baf..4f54a5f 100644
@@ -297,7 +297,7 @@ static inline u32 __iwl_read_direct32(const char *f, u32 l,
 					struct iwl_priv *priv, u32 reg)
 {
 	u32 value = _iwl_read_direct32(priv, reg);
-	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
+	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d\n", reg, value,
 		     f, l);
 	return value;
 }
drivers/net/wireless/iwlwifi/iwl-power.c +1 -1
index e0581a7..2655dbd 100644
@@ -874,7 +874,7 @@ void iwl_tt_initialize(struct iwl_priv *priv)
 	int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
 	struct iwl_tt_trans *transaction;
 
-	IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
+	IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling\n");
 
 	memset(tt, 0, sizeof(struct iwl_tt_mgmt));
 
drivers/net/wireless/iwlwifi/iwl-scan.c +1 -1
index 79ce8e5..d817c9c 100644
@@ -453,7 +453,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 		added++;
 	}
 
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
 	return added;
 }
 
drivers/net/wireless/iwlwifi/iwl-sta.c +6 -6
index 531d0e4..b38a055 100644
@@ -71,7 +71,7 @@ u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr)
 	    (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
 	     ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
 	      (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
-		IWL_ERR(priv, "Requested station info for sta %d before ready. \n",
+		IWL_ERR(priv, "Requested station info for sta %d before ready.\n",
 			ret);
 		ret = IWL_INVALID_STATION;
 	}
@@ -143,7 +143,7 @@ static void iwl_process_add_sta_resp(struct iwl_priv *priv,
 			sta_id);
 		break;
 	case ADD_STA_MODIFY_NON_EXIST_STA:
-		IWL_ERR(priv, "Attempting to modify non-existing station %d \n",
+		IWL_ERR(priv, "Attempting to modify non-existing station %d\n",
 			sta_id);
 		break;
 	default:
@@ -574,7 +574,7 @@ static int iwl_remove_station(struct iwl_priv *priv, struct ieee80211_sta *sta)
 
 	if (!iwl_is_ready(priv)) {
 		IWL_DEBUG_INFO(priv,
-			"Unable to remove station %pM, device not ready. \n",
+			"Unable to remove station %pM, device not ready.\n",
 			sta->addr);
 		/*
 		 * It is typical for stations to be removed when we are
@@ -671,7 +671,7 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv, bool force)
 	} else {
 		for (i = 0; i < priv->hw_params.max_stations; i++) {
 			if (priv->stations[i].used & IWL_STA_UCODE_ACTIVE) {
-				IWL_DEBUG_INFO(priv, "Clearing ucode active for station %d \n", i);
+				IWL_DEBUG_INFO(priv, "Clearing ucode active for station %d\n", i);
 				priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE;
 				cleared = true;
 			}
@@ -1108,7 +1108,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
 	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled.\n");
 		spin_unlock_irqrestore(&priv->sta_lock, flags);
 		return 0;
 	}
@@ -1210,7 +1210,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv,
 		return ret;
 
 	if (init) {
-		IWL_DEBUG_INFO(priv, "init LQ command complete, clearing sta addition status for sta %d \n",
+		IWL_DEBUG_INFO(priv, "init LQ command complete, clearing sta addition status for sta %d\n",
 			       lq->sta_id);
 		spin_lock_irqsave(&priv->sta_lock, flags_spin);
 		priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
drivers/net/wireless/iwlwifi/iwl-tx.c +1 -1
index 0ea881a..4f8f448 100644
@@ -640,7 +640,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 
 	if (!(meta->flags & CMD_ASYNC)) {
 		clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
+		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
 			       get_cmd_string(cmd->hdr.cmd));
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
drivers/net/wireless/iwlwifi/iwl3945-base.c +4 -4
index 76a6de9..c619f2a 100644
@@ -597,9 +597,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		txq->need_update = 0;
 	}
 
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
 	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
 			   ieee80211_hdrlen(fc));
@@ -1937,7 +1937,7 @@ static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 		added++;
 	}
 
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
 	return added;
 }
 
@@ -3403,7 +3403,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
 	}
 
 	/* Initialize rate scaling */
-	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
+	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl3945_rs_rate_init(priv, sta, sta_id);
 
#10 lore raw

Re: [PATCH 4/7 v2] wireless/iwlwifi: remove trailing space in messages

Quoted 12 lines · Frans Pop

Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed().

Cc Zhu Yi <[email protected]>
Cc Reinette Chatre <[email protected]>
Cc Intel Linux Wireless <ilw-VuQAYsv1563Yd54FQh9/[email protected]>

---

Rebased against and updated for iwlwifi-2.6.git/master as requested by Reinette.

John, I'll take this patch and submit it as part of our regular process.

Reinette

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#11 lore raw

PATCH 5/7 wireless/prism54: remove trailing space in messages

In reply to Frans Pop
Cc Luis R. Rodriguez <[email protected]>
---
 drivers/net/wireless/p54/txrx.c           |    2 +-
 drivers/net/wireless/prism54/islpci_dev.c |   16 ++++++++--------
 drivers/net/wireless/prism54/islpci_eth.c |    8 ++++----
 drivers/net/wireless/prism54/islpci_mgt.c |    8 ++++----
 drivers/net/wireless/prism54/oid_mgt.c    |    2 +-
 5 files changed, 18 insertions(+), 18 deletions(-)
drivers/net/wireless/p54/txrx.c +1 -1
index 6605799..2ceff54 100644
@@ -38,7 +38,7 @@ static void p54_dump_tx_queue(struct p54_common *priv)
 	u32 largest_hole = 0, free;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
+	printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
 	       wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
 
 	prev_addr = priv->rx_start;
drivers/net/wireless/prism54/islpci_dev.c +8 -8
index a3ba353..7c82e43 100644
@@ -227,14 +227,14 @@ islpci_interrupt(int irq, void *config)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 		DEBUG(SHOW_FUNCTION_CALLS,
-		      "IRQ: Identification register 0x%p 0x%x \n", device, reg);
+		      "IRQ: Identification register 0x%p 0x%x\n", device, reg);
 #endif
 
 		/* check for each bit in the register separately */
 		if (reg & ISL38XX_INT_IDENT_UPDATE) {
 #if VERBOSE > SHOW_ERROR_MESSAGES
 			/* Queue has been updated */
-			DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
+			DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
 
 			DEBUG(SHOW_QUEUE_INDEXES,
 			      "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
@@ -300,7 +300,7 @@ islpci_interrupt(int irq, void *config)
 						ISL38XX_CB_RX_DATA_LQ) != 0) {
 #if VERBOSE > SHOW_ERROR_MESSAGES
 				DEBUG(SHOW_TRACING,
-				      "Received frame in Data Low Queue \n");
+				      "Received frame in Data Low Queue\n");
 #endif
 				islpci_eth_receive(priv);
 			}
@@ -325,7 +325,7 @@ islpci_interrupt(int irq, void *config)
 			/* Device has been initialized */
 #if VERBOSE > SHOW_ERROR_MESSAGES
 			DEBUG(SHOW_TRACING,
-			      "IRQ: Init flag, device initialized \n");
+			      "IRQ: Init flag, device initialized\n");
 #endif
 			wake_up(&priv->reset_done);
 		}
@@ -333,7 +333,7 @@ islpci_interrupt(int irq, void *config)
 		if (reg & ISL38XX_INT_IDENT_SLEEP) {
 			/* Device intends to move to powersave state */
 #if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
+			DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
 #endif
 			isl38xx_handle_sleep_request(priv->control_block,
 						     &powerstate,
@@ -343,7 +343,7 @@ islpci_interrupt(int irq, void *config)
 		if (reg & ISL38XX_INT_IDENT_WAKEUP) {
 			/* Device has been woken up to active state */
 #if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
+			DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
 #endif
 
 			isl38xx_handle_wakeup(priv->control_block,
@@ -634,7 +634,7 @@ islpci_alloc_memory(islpci_private *priv)
 	      ioremap(pci_resource_start(priv->pdev, 0),
 		      ISL38XX_PCI_MEM_SIZE))) {
 		/* error in remapping the PCI device memory address range */
-		printk(KERN_ERR "PCI memory remapping failed \n");
+		printk(KERN_ERR "PCI memory remapping failed\n");
 		return -1;
 	}
 
@@ -901,7 +901,7 @@ islpci_setup(struct pci_dev *pdev)
 
 	if (register_netdev(ndev)) {
 		DEBUG(SHOW_ERROR_MESSAGES,
-		      "ERROR: register_netdev() failed \n");
+		      "ERROR: register_netdev() failed\n");
 		goto do_islpci_free_memory;
 	}
 
drivers/net/wireless/prism54/islpci_eth.c +4 -4
index 872b647..af9e7fb 100644
@@ -89,7 +89,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	u32 curr_frag;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
+	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
 #endif
 
 	/* lock the driver code */
@@ -140,7 +140,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 			}
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
+			DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
 			      src, skb->len);
 #endif
 		} else {
@@ -319,7 +319,7 @@ islpci_eth_receive(islpci_private *priv)
 	int discard = 0;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
+	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
 #endif
 
 	/* the device has written an Ethernet frame in the data area
@@ -431,7 +431,7 @@ islpci_eth_receive(islpci_private *priv)
 		skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
 		if (unlikely(skb == NULL)) {
 			/* error allocating an sk_buff structure elements */
-			DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
+			DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
 			break;
 		}
 		skb_reserve(skb, (4 - (long) skb->data) & 0x03);
drivers/net/wireless/prism54/islpci_mgt.c +4 -4
index 69d2f88..89b0278 100644
@@ -113,7 +113,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
 	u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
+	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
 #endif
 
 	while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
@@ -211,7 +211,7 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
 	{
 		pimfor_header_t *h = buf.mem;
 		DEBUG(SHOW_PIMFOR_FRAMES,
-		      "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
+		      "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
 		      h->operation, oid, h->device_id, h->flags, length);
 
 		/* display the buffer contents for debugging */
@@ -279,7 +279,7 @@ islpci_mgt_receive(struct net_device *ndev)
 	u32 curr_frag;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
+	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
 #endif
 
 	/* Only once per interrupt, determine fragment range to
@@ -338,7 +338,7 @@ islpci_mgt_receive(struct net_device *ndev)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 		DEBUG(SHOW_PIMFOR_FRAMES,
-		      "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
+		      "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
 		      header->operation, header->oid, header->device_id,
 		      header->flags, header->length);
 
drivers/net/wireless/prism54/oid_mgt.c +1 -1
index 1187e61..07df70a 100644
@@ -819,7 +819,7 @@ mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
 			k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
 			for (i = 0; i < list->nr; i++)
 				k += snprintf(str + k, PRIV_STR_SIZE - k,
-					      "bss[%u] : \nage=%u\nchannel=%u\n"
+					      "bss[%u] :\nage=%u\nchannel=%u\n"
 					      "capinfo=0x%X\nrates=0x%X\n"
 					      "basic_rates=0x%X\n",
 					      i, list->bsslist[i].age,
Signature · 1 line
1.6.6.1
author
#12 lore raw

PATCH 6/7 wireless/raylink: remove trailing space in messages

In reply to Frans Pop
Cc Corey Thomas <[email protected]>
---
 drivers/net/wireless/ray_cs.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)
drivers/net/wireless/ray_cs.c +6 -6
index 84c530a..8d173cc 100644
@@ -556,7 +556,7 @@ static int ray_init(struct net_device *dev)
 	local->fw_ver = local->startup_res.firmware_version[0];
 	local->fw_bld = local->startup_res.firmware_version[1];
 	local->fw_var = local->startup_res.firmware_version[2];
-	dev_dbg(&link->dev, "ray_init firmware version %d.%d \n", local->fw_ver,
+	dev_dbg(&link->dev, "ray_init firmware version %d.%d\n", local->fw_ver,
 	      local->fw_bld);
 
 	local->tib_length = 0x20;
@@ -2252,7 +2252,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
 			    (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
 			     FCS_LEN)) {
 				pr_debug(
-				      "ray_cs invalid packet length %d received \n",
+				      "ray_cs invalid packet length %d received\n",
 				      rx_len);
 				return;
 			}
@@ -2263,7 +2263,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
 			    (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
 			     FCS_LEN)) {
 				pr_debug(
-				      "ray_cs invalid packet length %d received \n",
+				      "ray_cs invalid packet length %d received\n",
 				      rx_len);
 				return;
 			}
@@ -2771,11 +2771,11 @@ static int ray_cs_proc_show(struct seq_file *m, void *v)
 			seq_printf(m, "Hop dwell            = %d Kus\n",
 				   pfh->dwell_time[0] +
 				   256 * pfh->dwell_time[1]);
-			seq_printf(m, "Hop set              = %d \n",
+			seq_printf(m, "Hop set              = %d\n",
 				   pfh->hop_set);
-			seq_printf(m, "Hop pattern          = %d \n",
+			seq_printf(m, "Hop pattern          = %d\n",
 				   pfh->hop_pattern);
-			seq_printf(m, "Hop index            = %d \n",
+			seq_printf(m, "Hop index            = %d\n",
 				   pfh->hop_index);
 			p += p[1] + 2;
 		} else {
Signature · 1 line
1.6.6.1
author
#13 lore raw

PATCH 7/7 wireless/libertas: remove trailing space in debugfs header

In reply to Frans Pop
---
 drivers/net/wireless/libertas/debugfs.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/wireless/libertas/debugfs.c +1 -1
index 587b0cb..9c3c2f8 100644
@@ -74,7 +74,7 @@ static ssize_t lbs_getscantable(struct file *file, char __user *userbuf,
 		return -ENOMEM;
 
 	pos += snprintf(buf+pos, len-pos,
-		"# | ch  | rssi |       bssid       |   cap    | Qual | SSID \n");
+		"# | ch  | rssi |       bssid       |   cap    | Qual | SSID\n");
 
 	mutex_lock(&priv->lock);
 	list_for_each_entry (iter_bss, &priv->network_list, list) {
Signature · 1 line
1.6.6.1
maintainer
#14 lore raw
In reply to Frans Pop

From: Frans Pop <[email protected]>
Date: Wed, 24 Mar 2010 19:27:09 +0100

Quoted 7 lines

This is the third patchset to remove trailing spaces in kernel messages. Patches in this set cover wireless code.

Note that the last patch for libertas changes a debugfs header and not actually a message.

Patches have been rebased against current net-next.

John, please suck these in :-)