igb: add per-packet timestamping
Subsystems (2)
PATCH 1/1 igb: add per-packet timestamping
From: Nick Nunley <[email protected]>
This patch adds support for per-packet timestamping for the 82580 adapter. The rx timestamp code is also pulled out of the inlined rx hotpath and instead moved to a seperate function.
This version adds a comment explaining the per-packet timestamping code added to igb_hwtstamp_ioctl().
---
drivers/net/igb/e1000_82575.h | 2 ++ drivers/net/igb/igb.h | 2 ++ drivers/net/igb/igb_main.c | 45 ++++++++++++++++++++++++++++++++++------- 3 files changed, 41 insertions(+), 8 deletions(-)
drivers/net/igb/e1000_82575.h +2 -0
@@ -53,6 +53,7 @@ extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000#define E1000_SRRCTL_DROP_EN 0x80000000 +#define E1000_SRRCTL_TIMESTAMP 0x40000000#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002#define E1000_MRQC_ENABLE_VMDQ 0x00000003
@@ -109,6 +110,7 @@ union e1000_adv_rx_desc {#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0#define E1000_RXDADV_HDRBUFLEN_SHIFT 5#define E1000_RXDADV_STAT_TS 0x10000/* Pkt was time stamped */ +#define E1000_RXDADV_STAT_TSIP 0x08000/* timestamp in packet */ /* Transmit Descriptor - Advanced */ union e1000_adv_tx_desc {
drivers/net/igb/igb.h +2 -0
@@ -107,6 +107,7 @@ struct vf_data_storage {#define MAXIMUM_ETHERNET_VLAN_SIZE 1522/* Supported Rx Buffer Sizes */ +#define IGB_RXBUFFER_64 64/* Used for packet split */ #define IGB_RXBUFFER_128 128/* Used for packet split */ #define IGB_RXBUFFER_1024 1024#define IGB_RXBUFFER_2048 2048
@@ -324,6 +325,7 @@ struct igb_adapter {#define IGB_82576_TSYNC_SHIFT 19#define IGB_82580_TSYNC_SHIFT 24 +#define IGB_TS_HDR_LEN 16enum e1000_state_t { __IGB_TESTING, __IGB_RESETTING,
drivers/net/igb/igb_main.c +37 -8
88 lines not on this page · raw message
From: Jeff Kirsher <[email protected]>
Date: Fri, 26 Mar 2010 14:36:47 -0700
Quoted 11 lines
From: Nick Nunley <[email protected]>
This patch adds support for per-packet timestamping for the 82580 adapter. The rx timestamp code is also pulled out of the inlined rx hotpath and instead moved to a seperate function.
This version adds a comment explaining the per-packet timestamping code added to
igb_hwtstamp_ioctl().Signed-off-by Nicholas Nunley <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied.