Skip to contentSkip to conversation

Continuation line fixes

PATCH Applied Joe Perches 8 participants 22 messages Mar 27, 2010 – May 9, 2010

Subsystems (11)
Networking Network drivers Memory management Arm (32-bit) +7 more subsystems
lore
Share & tools
lore

Joe Perches

author
#0 lore raw

cover Continuation line fixes

Fix undesired spaces caused by improper continuation line use

Joe Perches (9):
arch/arm: Fix continuation lines
arch/blackfin: Fix continuation lines
drivers/infiniband: Fix continuation lines
drivers/media: Fix continuation lines
drivers/message: Fix continuation lines
drivers/net: Fix continuation lines
drivers/scsi: Fix continuation lines
drivers/serial: Fix continuation lines
mm: Fix continuation lines

 arch/arm/mach-s5pv210/clock.c       |    4 +-
 arch/blackfin/mach-common/smp.c     |    4 +-
 drivers/infiniband/hw/nes/nes_nic.c |    4 +-
 drivers/media/video/ov511.c         |    4 +-
 drivers/message/fusion/mptbase.c    |    8 +++---
 drivers/net/atlx/atl1.c             |    2 +-
 drivers/scsi/arcmsr/arcmsr_hba.c    |   50 +++++++++++++++++-----------------
 drivers/scsi/qla2xxx/qla_attr.c     |   18 ++++++------
 drivers/scsi/qla2xxx/qla_os.c       |    6 ++--
 drivers/serial/bfin_5xx.c           |    8 +++---
 mm/slab.c                           |    9 +++---
 11 files changed, 59 insertions(+), 58 deletions(-)
author
#1 lore raw

PATCH 1/9 arch/arm: Fix continuation lines

Signed-off-by Joe Perches <[email protected]>
---
 arch/arm/mach-s5pv210/clock.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-s5pv210/clock.c +2 -2
index ccccae2..a989c5e 100644
@@ -394,8 +394,8 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
 	pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
 
-	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
-			HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, "
+			"HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
 	       armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
 
 	clk_fout_apll.rate = apll;
Signature · 1 line
1.7.0.14.g7e948
#2 lore raw

Re: [PATCH 1/9] arch/arm: Fix continuation lines

This is Samsung stuff, it should be copied to Ben (added).

Quoted 28 lines · Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 arch/arm/mach-s5pv210/clock.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-s5pv210/clock.c +2 -2
index ccccae2..a989c5e 100644
@@ -394,8 +394,8 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
 	pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
 
-	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
-			HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, "
+			"HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
 	       armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
 
 	clk_fout_apll.rate = apll;
Signature · 7 lines
1.7.0.14.g7e948


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#3 lore raw

PATCH 1/1 MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Quoted 1 line · Russell King - ARM Linux

This is Samsung stuff, it should be copied to Ben (added).

Maybe this is appropriate?

Signed-off-by Joe Perches <[email protected]>
---
 MAINTAINERS |   40 ++++++++--------------------------------
 1 files changed, 8 insertions(+), 32 deletions(-)
MAINTAINERS +8 -32
index 7a9ccda..5a0d6ef 100644
@@ -902,48 +902,24 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/plat-s3c/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-samsung/
 
-ARM/S3C2410 ARM ARCHITECTURE
+ARM/S3Cxxxx ARM ARCHITECTURE
 M:	Ben Dooks <[email protected]>
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/mach-s3c2410/
-
-ARM/S3C2440 ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2440/
-
-ARM/S3C2442 ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2442/
-
-ARM/S3C2443 ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2443/
-
-ARM/S3C6400 ARM ARCHITECTURE
-M:	Ben Dooks <[email protected]>
-L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c6400/
+F:	arch/arm/mach-s3c????/
+F:	arch/arm/plat-s3c????/
 
-ARM/S3C6410 ARM ARCHITECTURE
+ARM/S5Pxxxx ARM ARCHITECTURE
 M:	Ben Dooks <[email protected]>
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/mach-s3c6410/
+F:	arch/arm/mach-s5p????/
+F:	arch/arm/plat-s5p/
+F:	arch/arm/plat-s5p????/
 
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <[email protected]>
#4 lore raw

Re: [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Hi,

Quoted 4 lines · Joe Perches
Quoted 1 line · Russell King - ARM Linux

This is Samsung stuff, it should be copied to Ben (added).

Maybe this is appropriate?

No, s5p stubs are maintained by Samsung.
Of course Ben work on core part together, e.g., clock, interrupt.

Most s5pc1XX are done by Marek and Kyungmin Park except plat-samsung. common part of Samsung SoCs.

Thank you,
Kyungmin Park

Quoted 56 lines
Signed-off-by Joe Perches <[email protected]>

---
?MAINTAINERS | ? 40 ++++++++-------------------------------- ?1 files changed, 8 insertions(+), 32 deletions(-)

MAINTAINERS +0 -0
index 7a9ccda..5a0d6ef 100644
@@ -902,48 +902,24 @@ W: ? ? ? ?http://www.fluff.org/ben/linux/

?S: ? ? Maintained
?F: ? ? arch/arm/plat-s3c/
?F: ? ? arch/arm/plat-s3c24xx/

MAINTAINERS +2 -1
+F: ? ? arch/arm/plat-samsung/
 
-ARM/S3C2410 ARM ARCHITECTURE
+ARM/S3Cxxxx ARM ARCHITECTURE

?M: ? ? Ben Dooks <[email protected]>
?L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) ?W: ? ? http://www.fluff.org/ben/linux/
?S: ? ? Maintained

MAINTAINERS +3 -30
-F: ? ? arch/arm/mach-s3c2410/
-
-ARM/S3C2440 ARM ARCHITECTURE
-M: ? ? Ben Dooks <[email protected]>
-L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W: ? ? http://www.fluff.org/ben/linux/
-S: ? ? Maintained
-F: ? ? arch/arm/mach-s3c2440/
-
-ARM/S3C2442 ARM ARCHITECTURE
-M: ? ? Ben Dooks <[email protected]>
-L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W: ? ? http://www.fluff.org/ben/linux/
-S: ? ? Maintained
-F: ? ? arch/arm/mach-s3c2442/
-
-ARM/S3C2443 ARM ARCHITECTURE
-M: ? ? Ben Dooks <[email protected]>
-L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W: ? ? http://www.fluff.org/ben/linux/
-S: ? ? Maintained
-F: ? ? arch/arm/mach-s3c2443/
-
-ARM/S3C6400 ARM ARCHITECTURE
-M: ? ? Ben Dooks <[email protected]>
-L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-W: ? ? http://www.fluff.org/ben/linux/
-S: ? ? Maintained
-F: ? ? arch/arm/mach-s3c6400/
+F: ? ? arch/arm/mach-s3c????/
+F: ? ? arch/arm/plat-s3c????/
 
-ARM/S3C6410 ARM ARCHITECTURE
+ARM/S5Pxxxx ARM ARCHITECTURE
Quoted 1 line

?M: ? ? Ben Dooks <[email protected]>

It should be Byungho Min but now changed to Marek and Kyungmin Park

Quoted 18 lines

?L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) ?W: ? ? http://www.fluff.org/ben/linux/
?S: ? ? Maintained

MAINTAINERS +3 -1
-F: ? ? arch/arm/mach-s3c6410/
+F: ? ? arch/arm/mach-s5p????/
+F: ? ? arch/arm/plat-s5p/
+F: ? ? arch/arm/plat-s5p????/

?ARM/SHMOBILE ARM ARCHITECTURE
?M: ? ? Paul Mundt <[email protected]>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author
#5 lore raw

Re: [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Quoted 5 lines · Kyungmin Park

No, s5p stubs are maintained by Samsung.
Of course Ben work on core part together, e.g., clock, interrupt.

Most s5pc1XX are done by Marek and Kyungmin Park except plat-samsung. common part of Samsung SoCs.

So perhaps you'll add yourself and the correct entries to MAINTAINERS?

#6 lore raw

PATCH 1/1 MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Please add me and marek.
Ben how do you think? Marek is proper person since he posted a lot of s5p series patches.
Note that byoungho min is no longer works on this series

Thank you,
Kyungmin Park

On Apr 12, 2010 7:47 PM, "Joe Perches" <[email protected]> wrote:

Quoted 2 lines · Kyungmin Park

No, s5p stubs are maintained by Samsung.
...

So perhaps you'll add yourself and the correct entries to MAINTAINERS?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100417/d61388c4/attachment.htm>

#7 lore raw

Re: [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Quoted 4 lines · Kyungmin Park

Please add me and marek.
Ben how do you think? Marek is proper person since he posted a lot of s5p series patches.
Note that byoungho min is no longer works on this series

I thought the System LSI group where wanting to maintain this, which is why I've been holding off making any comment about what is going on.

Personally, I would like to see a co-maintainership between myself and whoever at Samsung before completely handing over the responsibility.

Quoted 14 lines

Thank you,
Kyungmin Park

On Apr 12, 2010 7:47 PM, "Joe Perches" <[email protected]> wrote:

Quoted 2 lines · Kyungmin Park

No, s5p stubs are maintained by Samsung.
...

So perhaps you'll add yourself and the correct entries to MAINTAINERS?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Signature · 5 lines
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.
#8 lore raw

Re: [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Quoted 11 lines · Ben Dooks
Quoted 4 lines · Kyungmin Park

Please add me and marek.
Ben how do you think? Marek is proper person since he posted a lot of s5p series patches.
Note that byoungho min is no longer works on this series

I thought the System LSI group where wanting to maintain this, which is why I've been holding off making any comment about what is going on.

Personally, I would like to see a co-maintainership between myself and whoever at Samsung before completely handing over the responsibility.

I agree. then how about the Marek, even though LSI want it. they don't have enough experience with open source works. you can see the recent their works at their git. but we are trying to modify and make a patch with open source style.

Also we setup the public git for open source

Thank you,
Kyungmin Park

P.S., when do you expect to hand-over responsibility to others?

Quoted 25 lines
Quoted 7 lines

Thank you,
Kyungmin Park

On Apr 12, 2010 7:47 PM, "Joe Perches" <[email protected]> wrote:

On Tue, 2010-04-13 at 08:53 +0900, Kyungmin Park wrote:

Quoted 8 lines
Quoted 2 lines

No, s5p stubs are maintained by Samsung.
...

So perhaps you'll add yourself and the correct entries to MAINTAINERS?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
--
Ben

Q: ? ? ?What's a light-year?
A: ? ? ?One-third less calories than a regular year.

#9 lore raw

RE: [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p

Quoted 4 lines · Kyungmin Park
Quoted 3 lines · Ben Dooks
Quoted 2 lines · Kyungmin Park

Please add me and marek.
Ben how do you think? Marek is proper person since he posted a lot of

s5p

Quoted 6 lines
Quoted 6 lines
Quoted 2 lines

series patches.
Note that byoungho min is no longer works on this series

I thought the System LSI group where wanting to maintain this, which is why I've been holding off making any comment about what is going on.

Quoted 7 lines
Quoted 2 lines

Personally, I would like to see a co-maintainership between myself and whoever at Samsung before completely handing over the responsibility.

I agree. then how about the Marek, even though LSI want it. they don't have enough experience with open source works. you can see the recent their works at their git. but we are trying to modify and make a patch with open source style.

Hi,

I don't agree with your opinion that System LSI doesn't have enough experience.
What is 'enough experience' that you said? Is it about posting to mailing list ?
I and my team members also have been posting Samsung SoC patches related to Samsung SoC more than you think, even though you argued you and Marek posted a lot of s5p series patches.

Quoted 1 line

Also we setup the public git for open source

When it comes to the public git, System LSI has setup the open git a few months earlier than you.
I hope you stop criticizing us. :-)

Anyway, we will continue to make much contributions as now.

Quoted 14 lines

Thank you,
Kyungmin Park

P.S., when do you expect to hand-over responsibility to others?

Quoted 10 lines
Quoted 10 lines

Thank you,
Kyungmin Park

On Apr 12, 2010 7:47 PM, "Joe Perches" <[email protected]> wrote:

Quoted 2 lines · Kyungmin Park

No, s5p stubs are maintained by Samsung.
...

So perhaps you'll add yourself and the correct entries to MAINTAINERS?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.

author
#10 lore raw

PATCH 2/9 arch/blackfin: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 arch/blackfin/mach-common/smp.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
arch/blackfin/mach-common/smp.c +2 -2
index 7803f22..f58a554 100644
@@ -169,8 +169,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 			kfree(msg);
 			break;
 		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message \
-			0x%lx\n", cpu, msg->type);
+			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
+			       cpu, msg->type);
 			kfree(msg);
 			break;
 		}
Signature · 1 line
1.7.0.14.g7e948
#11 lore raw

Re: [Uclinux-dist-devel] [PATCH 2/9] arch/blackfin: Fix continuation lines

looks fine, i'll merge into my tree. thanks!
-mike

author
#12 lore raw

PATCH 3/9 drivers/infiniband: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/infiniband/hw/nes/nes_nic.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/nes/nes_nic.c +2 -2
index 91fdde3..9963676 100644
@@ -902,9 +902,8 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev)
 					nesvnic->nic_index &&
 					mc_index < max_pft_entries_avaiable) {
 						nes_debug(NES_DBG_NIC_RX,
-					"mc_index=%d skipping nic_index=%d,\
-					used for=%d \n", mc_index,
+					"mc_index=%d skipping nic_index=%d, "
+					"used for=%d\n", mc_index,
 					nesvnic->nic_index,
 					nesadapter->pft_mcast_map[mc_index]);
 				mc_index++;
Signature · 1 line
1.7.0.14.g7e948
author
#13 lore raw

PATCH 4/9 drivers/media: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/media/video/ov511.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/media/video/ov511.c +2 -2
index e0bce8d..c34325c 100644
@@ -57,8 +57,8 @@
 #define DRIVER_VERSION "v1.64 for Linux 2.5"
 #define EMAIL "[email protected]"
 #define DRIVER_AUTHOR "Mark McClelland <[email protected]> & Bret Wallach \
-	& Orion Sky Lawlor <[email protected]> & Kevin Moore & Charl P. Botha \
-	<[email protected]> & Claudio Matsuoka <[email protected]>"
+& Orion Sky Lawlor <[email protected]> & Kevin Moore & Charl P. Botha \
+<[email protected]> & Claudio Matsuoka <[email protected]>"
 #define DRIVER_DESC "ov511 USB Camera Driver"
 
 #define OV511_I2C_RETRIES 3
Signature · 1 line
1.7.0.14.g7e948
author
#14 lore raw

PATCH 5/9 drivers/message: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/message/fusion/mptbase.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/message/fusion/mptbase.c +4 -4
index 5382b5a..6ab5f8e 100644
@@ -83,17 +83,17 @@ MODULE_VERSION(my_VERSION);
 static int mpt_msi_enable_spi;
 module_param(mpt_msi_enable_spi, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
-		controllers (default=0)");
+controllers (default=0)");
 
 static int mpt_msi_enable_fc;
 module_param(mpt_msi_enable_fc, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
-		controllers (default=0)");
+controllers (default=0)");
 
 static int mpt_msi_enable_sas;
 module_param(mpt_msi_enable_sas, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
-		controllers (default=0)");
+controllers (default=0)");
 
 
 static int mpt_channel_mapping;

@@ -105,7 +105,7 @@ static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
 		  &mpt_debug_level, 0600);
 MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
-	- (default=0)");
+- (default=0)");
 
 int mpt_fwfault_debug;
 EXPORT_SYMBOL(mpt_fwfault_debug);
Signature · 1 line
1.7.0.14.g7e948
author
#15 lore raw

PATCH 6/9 drivers/net: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/net/atlx/atl1.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/atlx/atl1.c +1 -1
index 9ba5470..0ebd820 100644
@@ -84,7 +84,7 @@
 
 #define ATLX_DRIVER_VERSION "2.1.3"
 MODULE_AUTHOR("Xiong Huang <[email protected]>, \
-	Chris Snook <[email protected]>, Jay Cliburn <[email protected]>");
+Chris Snook <[email protected]>, Jay Cliburn <[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ATLX_DRIVER_VERSION);
Signature · 1 line
1.7.0.14.g7e948
author
#17 lore raw

PATCH 7/9 drivers/scsi: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/scsi/arcmsr/arcmsr_hba.c |   50 +++++++++++++++++++-------------------
 drivers/scsi/qla2xxx/qla_attr.c  |   18 +++++++-------
 drivers/scsi/qla2xxx/qla_os.c    |    6 ++--
 3 files changed, 37 insertions(+), 37 deletions(-)
drivers/scsi/arcmsr/arcmsr_hba.c +25 -25
index 47d5d19..07a9fd6 100644
@@ -585,8 +585,8 @@ static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
 			break;
 		else {
 			retry_count--;
-			printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
-			timeout, retry count down = %d \n", acb->host->host_no, retry_count);
+			printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+			"timeout, retry count down = %d\n", acb->host->host_no, retry_count);
 		}
 	} while (retry_count != 0);
 }

@@ -602,8 +602,8 @@ static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb)
 			break;
 		else {
 			retry_count--;
-			printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
-			timeout,retry count down = %d \n", acb->host->host_no, retry_count);
+			printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+			"timeout,retry count down = %d\n", acb->host->host_no, retry_count);
 		}
 	} while (retry_count != 0);
 }

@@ -732,14 +732,14 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, uint32_t fla
 			if (abortcmd) {
 				abortcmd->result |= DID_ABORT << 16;
 				arcmsr_ccb_complete(ccb, 1);
-				printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' \
-				isr got aborted command \n", acb->host->host_no, ccb);
+				printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' "
+				"isr got aborted command\n", acb->host->host_no, ccb);
 			}
 		}
-		printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \
-				done acb = '0x%p'"
-				"ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x"
-				" ccboutstandingcount = %d \n"
+		printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command "
+				"done acb = '0x%p' "
+				"ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x "
+				"ccboutstandingcount = %d\n"
 				, acb->host->host_no
 				, acb
 				, ccb

@@ -1709,8 +1709,8 @@ static void arcmsr_get_hba_config(struct AdapterControlBlock *acb)
 
 	writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, &reg->inbound_msgaddr0);
 	if (arcmsr_hba_wait_msgint_ready(acb)) {
-		printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
-			miscellaneous data' timeout \n", acb->host->host_no);
+		printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+		       "miscellaneous data' timeout\n", acb->host->host_no);
 	}
 
 	count = 8;

@@ -1753,8 +1753,8 @@ static void arcmsr_get_hbb_config(struct AdapterControlBlock *acb)
 
 	writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell_reg);
 	if (arcmsr_hbb_wait_msgint_ready(acb)) {
-		printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
-			miscellaneous data' timeout \n", acb->host->host_no);
+		printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+		       "miscellaneous data' timeout\n", acb->host->host_no);
 	}
 
 	count = 8;

@@ -1889,8 +1889,8 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb,
 			poll_ccb_done = (ccb == poll_ccb) ? 1:0;
 			if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
 				if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
-					printk(KERN_NOTICE "arcmsr%d: \
-		scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully \n"
+					printk(KERN_NOTICE "arcmsr%d: "
+		"scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully\n"
 						,acb->host->host_no
 						,ccb->pcmd->device->id
 						,ccb->pcmd->device->lun

@@ -1958,8 +1958,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 			writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, \
 							&reg->inbound_msgaddr0);
 			if (arcmsr_hba_wait_msgint_ready(acb)) {
-				printk(KERN_NOTICE "arcmsr%d: ""set ccb high \
-				part physical address timeout\n",
+				printk(KERN_NOTICE "arcmsr%d: set ccb high "
+				"part physical address timeout\n",
 				acb->host->host_no);
 				return 1;
 			}

@@ -1999,14 +1999,14 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 
 		writel(ARCMSR_MESSAGE_SET_CONFIG, reg->drv2iop_doorbell_reg);
 		if (arcmsr_hbb_wait_msgint_ready(acb)) {
-			printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \
-			timeout \n",acb->host->host_no);
+			printk(KERN_NOTICE "arcmsr%d: 'set command Q window' "
+			"timeout\n",acb->host->host_no);
 			return 1;
 		}
 
 		writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell_reg);
 		if (arcmsr_hbb_wait_msgint_ready(acb)) {
-			printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode \n"\
+			printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode\n"
 			,acb->host->host_no);
 			return 1;
 		}

@@ -2048,8 +2048,8 @@ static void arcmsr_start_hba_bgrb(struct AdapterControlBlock *acb)
 	acb->acb_flags |= ACB_F_MSG_START_BGRB;
 	writel(ARCMSR_INBOUND_MESG0_START_BGRB, &reg->inbound_msgaddr0);
 	if (arcmsr_hba_wait_msgint_ready(acb)) {
-		printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
-				rebulid' timeout \n", acb->host->host_no);
+		printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+				"rebuild' timeout\n", acb->host->host_no);
 	}
 }
 

@@ -2059,8 +2059,8 @@ static void arcmsr_start_hbb_bgrb(struct AdapterControlBlock *acb)
 	acb->acb_flags |= ACB_F_MSG_START_BGRB;
 	writel(ARCMSR_MESSAGE_START_BGRB, reg->drv2iop_doorbell_reg);
 	if (arcmsr_hbb_wait_msgint_ready(acb)) {
-		printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
-				rebulid' timeout \n",acb->host->host_no);
+		printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+				"rebuild' timeout\n",acb->host->host_no);
 	}
 }
drivers/scsi/qla2xxx/qla_attr.c +9 -9
index 90d1e06..ea87ea7 100644
@@ -1946,9 +1946,9 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job)
 	    (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
 	{
 		DEBUG2(printk(KERN_INFO
-		    "dma mapping resulted in different sg counts \
-		    [request_sg_cnt: %x dma_request_sg_cnt: %x\
-		    reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+		    "dma mapping resulted in different sg counts "
+		    "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+		    "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
 		    bsg_job->request_payload.sg_cnt, req_sg_cnt,
 		    bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
 		rval = -EAGAIN;

@@ -2040,9 +2040,9 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
 		(rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
 	{
 		DEBUG2(qla_printk(KERN_WARNING, ha,
-		    "dma mapping resulted in different sg counts \
-		    [request_sg_cnt: %x dma_request_sg_cnt: %x\
-		    reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+		    "dma mapping resulted in different sg counts "
+		    "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+		    "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
 		    bsg_job->request_payload.sg_cnt, req_sg_cnt,
 		    bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
 		rval = -EAGAIN;

@@ -2184,9 +2184,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
 	    (elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
 	{
 		DEBUG2(printk(KERN_INFO
-		    "dma mapping resulted in different sg counts \
-		    [request_sg_cnt: %x dma_request_sg_cnt: %x\
-		    reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+		    "dma mapping resulted in different sg counts "
+		    "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+		    "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
 		    bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt,
 		    bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt));
 		rval = -EAGAIN;
drivers/scsi/qla2xxx/qla_os.c +3 -3
index 46720b2..eccbff3 100644
@@ -87,9 +87,9 @@ MODULE_PARM_DESC(ql2xiidmaenable,
 int ql2xmaxqueues = 1;
 module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xmaxqueues,
-		"Enables MQ settings "
-		"Default is 1 for single queue. Set it to number \
-			of queues in MQ mode.");
+		 "Enables MQ settings "
+		 "Default is 1 for single queue. "
+		 "Set it to number of queues in MQ mode.");
 
 int ql2xmultique_tag;
 module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
Signature · 1 line
1.7.0.14.g7e948
author
#18 lore raw

PATCH 8/9 drivers/serial: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 drivers/serial/bfin_5xx.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/serial/bfin_5xx.c +4 -4
index fcf273e..48f1986 100644
@@ -733,8 +733,8 @@ static int bfin_serial_startup(struct uart_port *port)
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
 			uart->cts_pin = -1;
-			pr_info("Unable to attach BlackFin UART CTS interrupt.\
-				 So, disable it.\n");
+			pr_info("Unable to attach BlackFin UART CTS interrupt."
+				" So, disable it.\n");
 		}
 	}
 	if (uart->rts_pin >= 0) {

@@ -746,8 +746,8 @@ static int bfin_serial_startup(struct uart_port *port)
 	if (request_irq(uart->status_irq,
 		bfin_serial_mctrl_cts_int,
 		IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
-		pr_info("Unable to attach BlackFin UART Modem \
-			Status interrupt.\n");
+		pr_info("Unable to attach BlackFin UART Modem "
+			"Status interrupt.\n");
 	}
 
 	/* CTS RTS PINs are negative assertive. */
Signature · 1 line
1.7.0.14.g7e948
author
#20 lore raw

PATCH 9/9 mm: Fix continuation lines

In reply to Joe Perches
Signed-off-by Joe Perches <[email protected]>
---
 mm/slab.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)
mm/slab.c +5 -4
index a9f325b..ceb4e3a 100644
@@ -4227,10 +4227,11 @@ static int s_show(struct seq_file *m, void *p)
 		unsigned long node_frees = cachep->node_frees;
 		unsigned long overflows = cachep->node_overflow;
 
-		seq_printf(m, " : globalstat %7lu %6lu %5lu %4lu \
-				%4lu %4lu %4lu %4lu %4lu", allocs, high, grown,
-				reaped, errors, max_freeable, node_allocs,
-				node_frees, overflows);
+		seq_printf(m, " : globalstat %7lu %6lu %5lu %4lu "
+			   "%4lu %4lu %4lu %4lu %4lu",
+			   allocs, high, grown,
+			   reaped, errors, max_freeable, node_allocs,
+			   node_frees, overflows);
 	}
 	/* cpu stats */
 	{
Signature · 7 lines
1.7.0.14.g7e948

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Applied
#21 lore raw

Re: [PATCH 9/9] mm: Fix continuation lines

Quoted 1 line · Joe Perches
Signed-off-by Joe Perches <[email protected]>

Applied.

Quoted 14 lines
---
 mm/slab.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)
mm/slab.c +0 -2
index a9f325b..ceb4e3a 100644
@@ -4227,10 +4227,11 @@ static int s_show(struct seq_file *m, void *p)
 		unsigned long node_frees = cachep->node_frees;
 		unsigned long overflows = cachep->node_overflow;
 
-		seq_printf(m, " : globalstat %7lu %6lu %5lu %4lu \
-				%4lu %4lu %4lu %4lu %4lu", allocs, high, grown,

mm/slab.c static int s_show(struct seq_file *m, void *p) · line 4237

Quoted 10 lines
mm/slab.c +5 -2
-				reaped, errors, max_freeable, node_allocs,
-				node_frees, overflows);
+		seq_printf(m, " : globalstat %7lu %6lu %5lu %4lu "
+			   "%4lu %4lu %4lu %4lu %4lu",
+			   allocs, high, grown,
+			   reaped, errors, max_freeable, node_allocs,
+			   node_frees, overflows);
 	}
 	/* cpu stats */
 	{

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>