ml300: remove support for broken, orphaned board
Subsystems (2)
PATCH 1/1 ml300: remove support for broken, orphaned board
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it.
--- MAKEALL | 1 - Makefile | 3 - board/xilinx/ml300/Makefile | 70 ----- board/xilinx/ml300/config.mk | 32 -- board/xilinx/ml300/init.S | 44 --- board/xilinx/ml300/ml300.c | 128 -------- board/xilinx/ml300/serial.c | 154 ---------- board/xilinx/ml300/u-boot.lds | 146 --------- board/xilinx/ml300/u-boot.lds.debug | 135 --------- board/xilinx/ml300/xparameters.h | 196 ------------ board/xilinx/xilinx_iic/iic_adapter.c | 529 --------------------------------- doc/README.ml300 | 128 -------- include/configs/ml300.h | 181 ----------- 13 files changed, 0 insertions(+), 1747 deletions(-) delete mode 100644 board/xilinx/ml300/Makefile delete mode 100644 board/xilinx/ml300/config.mk delete mode 100644 board/xilinx/ml300/init.S delete mode 100644 board/xilinx/ml300/ml300.c delete mode 100644 board/xilinx/ml300/serial.c delete mode 100644 board/xilinx/ml300/u-boot.lds delete mode 100644 board/xilinx/ml300/u-boot.lds.debug delete mode 100644 board/xilinx/ml300/xparameters.h delete mode 100644 board/xilinx/xilinx_iic/iic_adapter.c delete mode 100644 doc/README.ml300 delete mode 100644 include/configs/ml300.h
MAKEALL +0 -1
@@ -238,7 +238,6 @@ LIST_4xx=" \ MIP405 \ MIP405T \ ML2 \ - ml300 \ ml507 \ ml507_flash \ neo \
Makefile +0 -3
@@ -1435,9 +1435,6 @@ MIP405T_config: unconfig ML2_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 -ml300_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx - ml507_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @mkdir -p $(obj)include $(obj)board/xilinx/ml507
board/xilinx/ml300/Makefile deleted +0 -70
70 lines not on this page · raw message
board/xilinx/ml300/config.mk deleted +0 -32
@@ -1,32 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# esd ADCIOP boards -# - -#TEXT_BASE = 0xFFFE0000 -TEXT_BASE = 0x04000000 - -# Use board specific linker script -LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds
board/xilinx/ml300/init.S deleted +0 -44
44 lines not on this page · raw message
board/xilinx/ml300/ml300.c deleted +0 -128
128 lines not on this page · raw message
board/xilinx/ml300/serial.c deleted +0 -154
154 lines not on this page · raw message
board/xilinx/ml300/u-boot.lds deleted +0 -146
146 lines not on this page · raw message
board/xilinx/ml300/u-boot.lds.debug deleted +0 -135
135 lines not on this page · raw message
board/xilinx/ml300/xparameters.h deleted +0 -196
196 lines not on this page · raw message
board/xilinx/xilinx_iic/iic_adapter.c deleted +0 -529
529 lines not on this page · raw message
doc/README.ml300 deleted +0 -128
128 lines not on this page · raw message
include/configs/ml300.h deleted +0 -181
181 lines not on this page · raw message
Signature · 1 line
1.6.6.1
PATCH 1/1 ml300: remove support for broken, orphaned board
Quoted 22 lines · Wolfgang Denk
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it.
Signed-off-by Wolfgang Denk <[email protected]>--- MAKEALL | 1 - Makefile | 3 - board/xilinx/ml300/Makefile | 70 ----- board/xilinx/ml300/config.mk | 32 -- board/xilinx/ml300/init.S | 44 --- board/xilinx/ml300/ml300.c | 128 -------- board/xilinx/ml300/serial.c | 154 ---------- board/xilinx/ml300/u-boot.lds | 146 --------- board/xilinx/ml300/u-boot.lds.debug | 135 --------- board/xilinx/ml300/xparameters.h | 196 ------------ board/xilinx/xilinx_iic/iic_adapter.c | 529 --------------------------------- doc/README.ml300 | 128 -------- include/configs/ml300.h | 181 ----------- 13 files changed, 0 insertions(+), 1747 deletions(-) delete mode 100644 board/xilinx/ml300/Makefile delete mode 100644 board/xilinx/ml300/config.mk delete mode 100644 board/xilinx/ml300/init.S
Quoted 8 lines
delete mode 100644 board/xilinx/ml300/ml300.c delete mode 100644 board/xilinx/ml300/serial.c delete mode 100644 board/xilinx/ml300/u-boot.lds delete mode 100644 board/xilinx/ml300/u-boot.lds.debug delete mode 100644 board/xilinx/ml300/xparameters.h delete mode 100644 board/xilinx/xilinx_iic/iic_adapter.c delete mode 100644 doc/README.ml300 delete mode 100644 include/configs/ml300.h
It is ancient board.
I agree.
Michal
Signature · 4 lines
Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian
PATCH 1/1 ml300: remove support for broken, orphaned board
Dear Michal Simek,
Quoted 3 lines · In message <[email protected]> you wrote:
Quoted 2 lines · Wolfgang Denk
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it.
...
Quoted 2 lines
It is ancient board.
I agree.
Maybe you can send a formal Acked-by: then ?
Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "A complex system that works is invariably found to have evolved from a simple system that worked." - John Gall, _Systemantics_
PATCH 1/1 ml300: remove support for broken, orphaned board
Quoted 11 lines · Wolfgang Denk
Dear Michal Simek,
Quoted 3 lines · In message <[email protected]> you wrote:
Quoted 2 lines · Wolfgang Denk
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it.
...
Quoted 2 lines
It is ancient board.
I agree.Maybe you can send a formal Acked-by: then ?
That's no problem.
Thanks,
Michal
Quoted 7 lines
Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian
Wolfgang Denk
AppliedPATCH 1/1 ml300: remove support for broken, orphaned board
In reply to Wolfgang DenkQuoted 22 lines · In message <[email protected]> you wrote:
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it.
Signed-off-by Wolfgang Denk <[email protected]>--- MAKEALL | 1 - Makefile | 3 - board/xilinx/ml300/Makefile | 70 ----- board/xilinx/ml300/config.mk | 32 -- board/xilinx/ml300/init.S | 44 --- board/xilinx/ml300/ml300.c | 128 -------- board/xilinx/ml300/serial.c | 154 ---------- board/xilinx/ml300/u-boot.lds | 146 --------- board/xilinx/ml300/u-boot.lds.debug | 135 --------- board/xilinx/ml300/xparameters.h | 196 ------------ board/xilinx/xilinx_iic/iic_adapter.c | 529 --------------------------------- doc/README.ml300 | 128 -------- include/configs/ml300.h | 181 ----------- 13 files changed, 0 insertions(+), 1747 deletions(-) delete mode 100644 board/xilinx/ml300/Makefile delete mode 100644 board/xilinx/ml300/config.mk delete mode 100644 board/xilinx/ml300/init.S
Quoted 8 lines
delete mode 100644 board/xilinx/ml300/ml300.c delete mode 100644 board/xilinx/ml300/serial.c delete mode 100644 board/xilinx/ml300/u-boot.lds delete mode 100644 board/xilinx/ml300/u-boot.lds.debug delete mode 100644 board/xilinx/ml300/xparameters.h delete mode 100644 board/xilinx/xilinx_iic/iic_adapter.c delete mode 100644 doc/README.ml300 delete mode 100644 include/configs/ml300.h
Applied.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de C++ is the best example of second-system effect since OS/360.