Hardware performance events are not counted by "perf" in a 2.6.31.12 KVM guest
Hello,
"perf" tool does not count hardware performance events ( cache misses etc) in a KVM guest ( Ubuntu 9.10 karmic, 2.6.31-14-generic kernel) on Xeon 5530 quad-core. The host is 2.6.28 kernel , Ubuntu 8.04 LTS, Hardy.
readfile.sh reads in a large file (1430 lines), which should cause cache-misses.
root@multicore4-vm3:/usr/src/linux-2.6.31.12/tools/perf# ./perf stat -r 5 -- bash readfile.sh
Performance counter stats for 'bash readfile.sh' (5 runs):
11002.207467 task-clock-msecs # 1.042 CPUs ( +-
10.834% )
3480 context-switches # 0.000 M/sec (
+- 19.017% )
2238 CPU-migrations # 0.000 M/sec (
+- 29.488% )
482299 page-faults # 0.044 M/sec (
+- 0.141% )
0 cycles # 0.000
M/sec ( +- nan% )
0 instructions # nan
IPC ( +- nan% )
0 cache-references # 0.000 M/sec (
+- nan% )
0 cache-misses # 0.000 M/sec (
+- nan% )10.560510393 seconds time elapsed ( +- 11.401% )
Do I need to make some configuration changes to enable hardware events ? A similar question was posted recently here : http://lkml.org/lkml/2010/3/18/342 but no response !
Any help would be greatly appreciated.
Thanks,
Naresh Rapolu.
Quoted 4 lines · Naresh Rapolu
"perf" tool does not count hardware performance events ( cache misses etc) in a KVM guest ( Ubuntu 9.10 karmic, 2.6.31-14-generic kernel) on Xeon 5530 quad-core. The host is 2.6.28 kernel , Ubuntu 8.04 LTS, Hardy.
The KVM guest has no access to the hardware counters of the cpu. KVM ignores these accesses from guests. Making this work needs proper virtualization of the PMU which is not implemented yet.
Regards,
Joerg