1/3 Refactor Xen support for Intel Turbo boost
PATCH 1/1 1/3 Refactor Xen support for Intel Turbo boost
# HG changeset patch
# User [email protected]
# Date 1269540083 18000
# Node ID 6d42054cb1947841ab34f04c1172971068487922
# Parent 18f4db5f72d756dda30e28d5872d91d35fdf9f0c Refactor the existing code that supports the Intel Turbo feature to move all the driver specific bits in the cpufreq driver. Create a tri-state interface for the Turbo feature that can distinguish amongst enabled Turbo, disabled Turbo, and processors that don't support Turbo at all.
Changing the code this way is necessary because the similar AMD feature Boost has a similar external interface but a very different internal implementation.
tools/misc/xenpm.c +7 -2
@@ -529,8 +529,13 @@ p_cpufreq->u.ondemand.sampling_rate);printf (" up_threshold : %u\n" , p_cpufreq->u.ondemand.up_threshold); -printf (" turbo mode : %s\n" , - p_cpufreq->u.ondemand.turbo_enabled ?"enabled" :"disabled" ); +if (p_cpufreq->u.ondemand.turbo_enabled !=0 ) { +printf (" turbo mode : " ); +if (p_cpufreq->u.ondemand.turbo_enabled ==1 ) +printf ("enabled\n" ); +else +printf ("disabled\n" ); + } }printf ("scaling_avail_freq :" );
xen/arch/x86/acpi/cpufreq/cpufreq.c +12 -1
@@ -410,6 +410,10 @@return -ENODEV ; } +if (policy->turbo ==-1 ) +if (target_freq > policy->cpuinfo.second_max_freq) + target_freq = policy->cpuinfo.second_max_freq; + perf = data->acpi_data; result = cpufreq_frequency_table_target(policy, data->freq_table,
@@ -610,12 +614,19 @@break ; } -/* Check for APERF/MPERF support in hardware */ +/* Check for APERF/MPERF support in hardware +* also check for boost support */ if (c->x86_vendor ==X86_VENDOR_INTEL && c->cpuid_level >=6 ) {unsigned int ecx; +unsigned int eax; ecx =cpuid_ecx (6 );if (ecx &CPUID_6_ECX_APERFMPERF_CAPABILITY ) acpi_cpufreq_driver.getavg = get_measured_perf; + eax =cpuid_eax (6 ); +if ( eax &0x2 ) { + policy->turbo =1 ; +printk (XENLOG_INFO "Turbo Mode detected and enabled!\n" ); + } }/*
xen/drivers/cpufreq/cpufreq_ondemand.c +14 -18
@@ -58,9 +58,6 @@static struct timer dbs_timer[NR_CPUS ]; -/* Turbo Mode */ -static int turbo_detected =0 ; -int write_ondemand_sampling_rate (unsigned int sampling_rate) { if ( (sampling_rate > MAX_SAMPLING_RATE / MICROSECS(1)) ||
@@ -111,10 +108,6 @@ policy = this_dbs_info->cur_policy; max = policy->max; -if (turbo_detected && !this_dbs_info->turbo_enabled) { -if (max > policy->cpuinfo.second_max_freq) - max = policy->cpuinfo.second_max_freq; - }if (unlikely (policy->resume)) {__cpufreq_driver_target (policy, max,CPUFREQ_RELATION_H );
@@ -275,7 +268,6 @@ }else dbs_tuners_ins.sampling_rate = usr_sampling_rate; } - this_dbs_info->turbo_enabled =1 ;dbs_timer_init (this_dbs_info);break ;
@@ -352,13 +344,6 @@static int __init cpufreq_gov_dbs_init (void ) { -#ifdef CONFIG_X86 -unsigned int eax =cpuid_eax (6 ); -if ( eax &0x2 ) { - turbo_detected =1 ; -printk (XENLOG_INFO "Turbo Mode detected!\n" ); - } -#endif return cpufreq_register_governor (&cpufreq_gov_dbs); }__initcall (cpufreq_gov_dbs_init);
@@ -406,16 +391,27 @@void cpufreq_dbs_enable_turbo (int cpuid) { -per_cpu (cpu_dbs_info, cpuid).turbo_enabled =1 ; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +if (policy->turbo !=0 ) + policy->turbo =1 ; }void cpufreq_dbs_disable_turbo (int cpuid) { -per_cpu (cpu_dbs_info, cpuid).turbo_enabled =0 ; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +if (policy->turbo !=0 ) + policy->turbo =-1 ; }unsigned int cpufreq_dbs_get_turbo_status (int cpuid) { -return turbo_detected &&per_cpu (cpu_dbs_info, cpuid).turbo_enabled; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +return policy->turbo; }
xen/include/acpi/cpufreq/cpufreq.h +2 -0
@@ -55,6 +55,8 @@unsigned int resume;/* flag for cpufreq 1st run * S3 wakeup, hotplug cpu, etc */ +int turbo;/* tristate flag: 0 for unsupported +* -1 for disable, 1 for enabled */ };extern struct cpufreq_policy *cpufreq_cpu_policy[NR_CPUS ];
-------------------------------------------------------
This patch makes sense to me. Just several comments.
Quoted 31 lines
-----Original Message-----
From: [email protected] [mailto:xen-devel- [email protected]] On Behalf Of Mark Langsdorf
Sent: Tuesday, March 30, 2010 2:28 AM
To: [email protected]; [email protected]
Subject: [Xen-devel] [PATCH] 1/3 Refactor Xen support for Intel Turbo boost# HG changeset patch
# User [email protected]
# Date 1269540083 18000
# Node ID6d42054cb1947841ab34f04c1172971068487922
# Parent18f4db5f72d756dda30e28d5872d91d35fdf9f0cRefactor the existing code that supports the Intel Turbo feature to move all the driver specific bits in the cpufreq driver. Create a tri-state interface for the Turbo feature that can distinguish amongst enabled Turbo, disabled Turbo, and processors that don't support Turbo at all.Changing the code this way is necessary because the similar AMD feature Boost has a similar external interface but a very different internal implementation.
Signed-off-by Mark Langsdorf <[email protected]>diff -r
18f4db5f72d7-r6d42054cb194tools/misc/xenpm.ctools/misc/xenpm.c +0
-0@@ -529,8 +529,13 @@ p_cpufreq->u.ondemand.sampling_rate);printf (" up_threshold : %u\n" , p_cpufreq->u.ondemand.up_threshold);
tools/misc/xenpm.c line 539
Quoted 10 lines
tools/misc/xenpm.c +7
-2-printf (" turbo mode : %s\n" , - p_cpufreq->u.ondemand.turbo_enabled ?"enabled" :"disabled" ); +if (p_cpufreq->u.ondemand.turbo_enabled !=0 ) { +printf (" turbo mode : " ); +if (p_cpufreq->u.ondemand.turbo_enabled ==1 ) +printf ("enabled\n" ); +else +printf ("disabled\n" ); + } }
Since the "turbo_enabled" is changed from governor specific flag to global cpufreq flag, this code should also be changed accordingly. E.g.
- move "turbo_enabled" from "struct xen_ondemand" to "struct xen_get_cpufreq_para"
- display turbo_enabled as cpufreq parameter, not dbs governor parameter.
Quoted 108 lines
tools/misc/xenpm.c +0
-0printf ("scaling_avail_freq :" );diff -r
18f4db5f72d7-r6d42054cb194xen/arch/x86/acpi/cpufreq/cpufreq.c
---a/xen/arch/x86/acpi/cpufreq/cpufreq.cThu Mar 25 10:01:05 2010
+0000
+++b/xen/arch/x86/acpi/cpufreq/cpufreq.cThu Mar 25 13:01:23
2010 -0500tools/misc/xenpm.c +12
-1@@ -410,6 +410,10 @@return -ENODEV ; } +if (policy->turbo ==-1 ) +if (target_freq > policy->cpuinfo.second_max_freq) + target_freq = policy->cpuinfo.second_max_freq; + perf = data->acpi_data; result = cpufreq_frequency_table_target(policy, data->freq_table,@@ -610,12 +614,19 @@break ; } -/* Check for APERF/MPERF support in hardware */ +/* Check for APERF/MPERF support in hardware +* also check for boost support */ if (c->x86_vendor ==X86_VENDOR_INTEL && c->cpuid_level >=6 ) {unsigned int ecx; +unsigned int eax; ecx =cpuid_ecx (6 );if (ecx &CPUID_6_ECX_APERFMPERF_CAPABILITY ) acpi_cpufreq_driver.getavg = get_measured_perf; + eax =cpuid_eax (6 ); +if ( eax &0x2 ) { + policy->turbo =1 ; +printk (XENLOG_INFO "Turbo Mode detected and enabled!\n" ); + } }/* diff -r
18f4db5f72d7-r6d42054cb194xen/drivers/cpufreq/cpufreq_ondemand.c
---a/xen/drivers/cpufreq/cpufreq_ondemand.cThu Mar 25 10:01:05
2010 +0000
+++b/xen/drivers/cpufreq/cpufreq_ondemand.cThu Mar 25 13:01:23
2010 -0500tools/misc/xenpm.c +10
-17@@ -58,9 +58,6 @@static struct timer dbs_timer[NR_CPUS ]; -/* Turbo Mode */ -static int turbo_detected =0 ; -int write_ondemand_sampling_rate (unsigned int sampling_rate) { if ( (sampling_rate > MAX_SAMPLING_RATE / MICROSECS(1)) ||@@ -111,10 +108,6 @@ policy = this_dbs_info->cur_policy; max = policy->max; -if (turbo_detected && !this_dbs_info->turbo_enabled) { -if (max > policy->cpuinfo.second_max_freq) - max = policy->cpuinfo.second_max_freq; - }if (unlikely (policy->resume)) {__cpufreq_driver_target (policy, max,CPUFREQ_RELATION_H );@@ -275,7 +268,6 @@ }else dbs_tuners_ins.sampling_rate = usr_sampling_rate; } - this_dbs_info->turbo_enabled =1 ;dbs_timer_init (this_dbs_info);break ;@@ -352,13 +344,6 @@static int __init cpufreq_gov_dbs_init (void ) { -#ifdef CONFIG_X86 -unsigned int eax =cpuid_eax (6 ); -if ( eax &0x2 ) { - turbo_detected =1 ; -printk (XENLOG_INFO "Turbo Mode detected!\n" ); - } -#endif return cpufreq_register_governor (&cpufreq_gov_dbs); }__initcall (cpufreq_gov_dbs_init);@@ -406,16 +391,27 @@void cpufreq_dbs_enable_turbo (int cpuid) { -per_cpu (cpu_dbs_info, cpuid).turbo_enabled =1 ; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +if (policy->turbo !=0 ) + policy->turbo =1 ; }void cpufreq_dbs_disable_turbo (int cpuid) { -per_cpu (cpu_dbs_info, cpuid).turbo_enabled =0 ; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +if (policy->turbo !=0 ) + policy->turbo =-1 ;
tools/misc/xenpm.c line 416
Quoted 10 lines
tools/misc/xenpm.c +4
-1}unsigned int cpufreq_dbs_get_turbo_status (int cpuid) { -return turbo_detected &&per_cpu (cpu_dbs_info, cpuid).turbo_enabled; +struct cpufreq_policy *policy; + + policy =per_cpu (cpu_dbs_info, cpuid).cur_policy; +return policy->turbo; }
Since "turbo_enabled " is cpufreq policy flag now, better to move these routine to xen/drivers/cpufreq/utility.c, and change name to something like cpufreq_enable_turbo...
tools/misc/xenpm.c line 61
Quoted 13 lines
diff -r
18f4db5f72d7-r6d42054cb194xen/include/acpi/cpufreq/cpufreq.h
---a/xen/include/acpi/cpufreq/cpufreq.hThu Mar 25 10:01:05 2010
+0000
+++b/xen/include/acpi/cpufreq/cpufreq.hThu Mar 25 13:01:23 2010 -0500tools/misc/xenpm.c +2
-0@@ -55,6 +55,8 @@unsigned int resume;/* flag for cpufreq 1st run * S3 wakeup, hotplug cpu, etc */ +int turbo;/* tristate flag: 0 for unsupported +* -1 for disable, 1 for enabled */ };extern struct cpufreq_policy *cpufreq_cpu_policy[NR_CPUS ];
Better to define readable constant like:
#define CPUFREQ_TURBO_DISABLED -1
#define CPUFREQ_TURBO_UNSUPPORTED 0
#define CPUFREQ_TURBO_ENABLED 1
instead of using magic number -1,0,1 in the above codes.
Best Regards
Ke