Skip to contentSkip to conversation

3/3 [retry 1] Add support for AMD MPERF/APERF

PATCH In review Mark Langsdorf 2 participants 2 messages Mar 29, 2010 – Mar 30, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 3/3 [retry 1] Add support for AMD MPERF/APERF

# HG changeset patch
# User [email protected]
# Date 1269570377 18000
# Node ID 4009c47dfed487f0432b7cbe3b5bac2f805ada73
# Parent d7401eeeac32a315aa9228d012dea2e78052120d Starting with Family 0x10, model 10 processors, some AMD processors will have support for the APERF/MPERF MSRs. This patch adds the checks necessary to support those MSRs.

It also makes the get_measured_perf function defined inside cpufreq.c driver independent. The max_freq is passed to the function by the caller instead of being taking from the acpi-cpufreq only drv_data structure.

This patch supersedes the patch "Add APERF/MPERF support for AMD processors" I sent on March 1, 2010.

xen/arch/x86/acpi/cpufreq/cpufreq.c +1 -1
diff -r d7401eeeac32 -r 4009c47dfed4 xen/arch/x86/acpi/cpufreq/cpufreq.c
@@ -269,7 +269,7 @@
  * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
  * no meaning should be associated with absolute values of these MSRs.
  */
-static unsigned int get_measured_perf(unsigned int cpu, unsigned int flag)
+unsigned int get_measured_perf(unsigned int cpu, unsigned int flag, unsigned 

int max_freq)

 {
     struct cpufreq_policy *policy;    
     struct perf_pair readin, cur, *saved;

@@ -353,7 +353,7 @@

#endif

- retval = drv_data[policy->cpu]->max_freq * perf_percent / 100;
+ retval = max_freq * perf_percent / 100;

     return retval;

}

xen/arch/x86/acpi/cpufreq/powernow.c +7 -0
diff -r d7401eeeac32 -r 4009c47dfed4 xen/arch/x86/acpi/cpufreq/powernow.c
@@ -38,6 +38,7 @@
 #include <acpi/acpi.h>
 #include <acpi/cpufreq/cpufreq.h>
 
+#define CPUID_6_ECX_APERFMPERF_CAPABILITY       (0x1)
 #define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
 #define CPB_CAPABLE             0x00000200
 #define USE_HW_PSTATE           0x00000080
@@ -61,6 +62,8 @@
 
 static struct powernow_cpufreq_data *drv_data[NR_CPUS];
 
+static struct cpufreq_driver powernow_cpufreq_driver;
+
 struct drv_cmd {
     unsigned int type;
     cpumask_t mask;
@@ -249,6 +252,10 @@
 
     if (c->cpuid_level >= 6) {
         unsigned int edx;
+        unsigned int ecx;
+        ecx = cpuid_ecx(6);
+        if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
+            powernow_cpufreq_driver.getavg = get_measured_perf;
         edx = cpuid_edx(CPUID_FREQ_VOLT_CAPABILITIES);
         if ((edx & CPB_CAPABLE) == CPB_CAPABLE) {
             policy->turbo = 1;
xen/drivers/cpufreq/utility.c +2 -1
diff -r d7401eeeac32 -r 4009c47dfed4 xen/drivers/cpufreq/utility.c
@@ -382,7 +382,8 @@
 
     if (cpufreq_driver->getavg)
     {
-        freq_avg = cpufreq_driver->getavg(cpu, flag);
+        freq_avg = cpufreq_driver->getavg(cpu, flag,
+                                         policy->cpuinfo.max_freq);
         if (freq_avg > 0)
             return freq_avg;
     }
xen/include/acpi/cpufreq/cpufreq.h +2 -1
diff -r d7401eeeac32 -r 4009c47dfed4 xen/include/acpi/cpufreq/cpufreq.h
@@ -138,7 +138,8 @@
                      unsigned int target_freq,
                      unsigned int relation);
     unsigned int    (*get)(unsigned int cpu);
-    unsigned int    (*getavg)(unsigned int cpu, unsigned int flag);
+    unsigned int    (*getavg)(unsigned int cpu, unsigned int flag,
+                              unsigned int max_freq);
     int    (*exit)(struct cpufreq_policy *policy);
 };
 
xen/include/acpi/cpufreq/processor_perf.h +2 -0
diff -r d7401eeeac32 -r 4009c47dfed4 xen/include/acpi/cpufreq/processor_perf.h
@@ -9,6 +9,8 @@
 int get_cpu_id(u8);
 int powernow_cpufreq_init(void);
 unsigned int powernow_register_driver(void);
+unsigned int get_measured_perf(unsigned int cpu, unsigned int flag,
+                               unsigned int max_freq);
 
 void cpufreq_residency_update(unsigned int, uint8_t);
 void cpufreq_statistic_update(unsigned int, uint8_t, uint8_t);

-------------------------------------------------------

#1 lore raw
Quoted 43 lines

-----Original Message-----
From: [email protected] [mailto:xen-devel- [email protected]] On Behalf Of Mark Langsdorf
Sent: Tuesday, March 30, 2010 2:29 AM
To: [email protected]; [email protected]
Subject: [Xen-devel] [PATCH] 3/3 [retry 1] Add support for AMD MPERF/APERF

# HG changeset patch
# User [email protected]
# Date 1269570377 18000
# Node ID 4009c47dfed487f0432b7cbe3b5bac2f805ada73
# Parent d7401eeeac32a315aa9228d012dea2e78052120d Starting with Family 0x10, model 10 processors, some AMD processors will have support for the APERF/MPERF MSRs. This patch adds the checks necessary to support those MSRs.

It also makes the get_measured_perf function defined inside cpufreq.c driver independent. The max_freq is passed to the function by the caller instead of being taking from the acpi-cpufreq only drv_data structure.

This patch supersedes the patch "Add APERF/MPERF support for AMD processors"
I sent on March 1, 2010.

diff -r d7401eeeac32 -r 4009c47dfed4 xen/arch/x86/acpi/cpufreq/cpufreq.c

xen/arch/x86/acpi/cpufreq/cpufreq.c +0 -0

2010 -0500

xen/arch/x86/acpi/cpufreq/cpufreq.c +1 -1
@@ -269,7 +269,7 @@
  * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
  * no meaning should be associated with absolute values of these MSRs.
  */
-static unsigned int get_measured_perf(unsigned int cpu, unsigned int flag)
+unsigned int get_measured_perf(unsigned int cpu, unsigned int flag,

unsigned
int max_freq)

 {
     struct cpufreq_policy *policy;
     struct perf_pair readin, cur, *saved;

xen/arch/x86/acpi/cpufreq/cpufreq.c line 359

Quoted 8 lines
xen/arch/x86/acpi/cpufreq/cpufreq.c +1 -1
@@ -353,7 +353,7 @@
 
 #endif
 
-    retval = drv_data[policy->cpu]->max_freq * perf_percent / 100;
+    retval = max_freq * perf_percent / 100;
 
     return retval;
 }

Changing the get_measured_perf interface definition looks not good idea. Leaving interface unchanged and modifying the implementation is more reasonable to me, e.g.

- retval = drv_data[policy->cpu]->max_freq * perf_percent / 100;
+ retval = policy->cpuinfo.max_freq * perf_percent / 100;

Best Regards
Ke