New: System sluggish when using ENE SD card reader
A message that is not in the archive (sent off-list or not yet received): [email protected]/
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 107 lines · On Wed, 31 Mar 2010 11:09:28 GMT [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=15656
Summary: System sluggish when using ENE SD card reader
Product: Drivers
Version: 2.5
Kernel Version: 2.6.33 and earlier
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MMC/SD
AssignedTo: [email protected]
ReportedBy: [email protected]
Regression: NoMy system becomes incredibly sluggish (jerky X cursor, choppy audio) when accessing an SD card with my notebook's built-in ENE card reader. The kernel was compiled with full pre-emption enabled.
Quoted 1 line
From lspci -nn:
0c:07.0 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0730]
0c:07.1 SD Host controller [0805]: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller [1524:0750]
0c:07.3 FLASH memory [0501]: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller [1524:0751]Quoted 1 line
From dmesg|grep sdhci,
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0c:07.1: SDHCI controller found [1524:0750] (rev 0) sdhci-pci 0000:0c:07.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: SDHCI controller found [1524:0751] (rev 0) sdhci-pci 0000:0c:07.3: enabling device (0000 -> 0002)
sdhci-pci 0000:0c:07.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A disabled
sdhci-pci 0000:0c:07.1: PCI INT A disabled
sdhci-pci 0000:0c:07.1: restoring config space at offset0xf(was0x482001ff, writing0x48200105)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x4(was0x0, writing0xf0f00400)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x3(was0x800000, writing0x802010)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x1(was0x2100000, writing0x2100106)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x4(was0x0, writing0xf0f00100)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x1(was0x2100000, writing0x2100002)
sdhci-pci 0000:0c:07.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A disabled
sdhci-pci 0000:0c:07.1: PCI INT A disabled
sdhci-pci 0000:0c:07.1: restoring config space at offset0xf(was0x482001ff, writing0x48200105)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x4(was0x0, writing0xf0f00400)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x3(was0x800000, writing0x802010)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x1(was0x2100000, writing0x2100106)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x4(was0x0, writing0xf0f00100)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x1(was0x2100000, writing0x2100002)
sdhci-pci 0000:0c:07.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A disabled
sdhci-pci 0000:0c:07.1: PCI INT A disabled
sdhci-pci 0000:0c:07.1: restoring config space at offset0xf(was0x482001ff, writing0x48200105)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x4(was0x0, writing0xf0f00400)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x3(was0x800000, writing0x802010)
sdhci-pci 0000:0c:07.1: restoring config space at offset0x1(was0x2100000, writing0x2100106)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x4(was0x0, writing0xf0f00100)
sdhci-pci 0000:0c:07.3: restoring config space at offset0x1(was0x2100000, writing0x2100002)
sdhci-pci 0000:0c:07.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:0c:07.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16and finally dmesg|grep mmc:
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0c:07.1] using PIO Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:0c:07.3] using PIO
mmc1: new high speed SDHC card at address 0007
mmcblk0: mmc1:0007 SD16G 15.0 GiB
mmcblk0: p1
SELinux: initialized (dev mmcblk0p1, type vfat), usesgenfs_contexts
mmc1: card 0007 removed