ppc4xx: Add option for PPC440SPe ports without old Rev. A support

The 440SPe Rev. A is quite old and newer 440SPe boards don't need support for this CPU revision. Since removing support for this older version simplifies the creation for newer U-Boot ports, this patch now enables 440SPe > Rev. A support by creating the CONFIG_440SPE_REVA define. By defining this in the board config header, Rev. A will still be supported. Otherwise (default for newer board ports), Rev. A will not be supported.

---
 cpu/ppc4xx/start.S       |    2 +-
 include/configs/katmai.h |    1 +
 include/configs/yucca.h  |    1 +
 3 files changed, 3 insertions(+), 1 deletions(-)

index 927c88c..c739deb 100644
@@ -475,7 +475,7 @@ tlbnxt:	addi	r4,r4,1		/* Next TLB */
 	/*----------------------------------------------------------------*/
 	/* TLB entry setup -- step thru tlbtab */
 	/*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE_REVA)
 	/*----------------------------------------------------------------*/
 	/* We have different TLB tables for revA and rev B of 440SPe */
 	/*----------------------------------------------------------------*/

index c013ac4..fb8ccae 100644
@@ -37,6 +37,7 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 

index 42f8807..0b4dfb8 100644
@@ -37,6 +37,7 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define EXTCLK_33_33		33333333

1.7.0.4

Applied to u-boot-ppc4xx/master. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de