percpu for v2.6.32
Hello, Linus.
Please consider pulling from
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git for-linus
to receive percpu changes. Pulling will cause the following conflict at kernel/sched.c::298.
<<<<<<< HEAD static DEFINE_PER_CPU_SHARED_ALIGNED(struct cfs_rq, init_cfs_rq); ======= static DEFINE_PER_CPU(struct cfs_rq, init_tg_cfs_rq) ____cacheline_aligned_in_smp; >>>>>>> 2ca7d674d7ab2220707b2ada0b690c0e7c95e7ac #endif /* CONFIG_FAIR_GROUP_SCHED */
Which can be resolved as
static DEFINE_PER_CPU_SHARED_ALIGNED(struct cfs_rq, init_tg_cfs_rq);
There have been a lot of changes. Major changes are,
* Percpu allocator now does sparse congruent allocation in vmalloc area, which allows archs to allocate the first percpu units for each cpu in whatever way they want. percpu allocator will allocate further chunks while maintaining their relative offsets. This allows archs to simply alloc bootmem for each cpu and then feed the addresses to the percpu allocator. So, the first percpu chunk (the static percpu variables and a bit of reserved space for dynamic ones) can share the usual linear address mapping.
This makes arch implementations very simple and archs no longer have to trade off between allocating in NUMA-friendly way and added TLB pressure. The removal of aliases also allows removing pageattr special case handling on x86.
* With embedded allocator extended to handle sparse embedding, lpage remapping allocator is no longer necessary and removed. Internal implementation has been made more flexible in the process and arch specific code has been made generic. If we ever need large pages for dynamic percpu allocations, it should be pretty easy to implement now.
* All arches except for ia64 have been converted to use the new allocator.
* This merge will bring the annoying limitation where all percpu symbols including the static ones need to be unique. This was necessary to convert alpha and s390 to the new allocator. The problem was that those archs assume static symbols to be addressable with reduced addressing range. The assumption can be met for the kernel image but module texts and their percpu data end up very far breaking the assumption. Using __weak attribute for percpu symbols forces the compiler to generate GOT based long addressing and thus works around the problem but with the said annoying restriction.
Only alpha and s390 require it but CONFIG_DEBUG_FORCE_WEAK_PER_CPU enables the restriction for all so that we can avoid introducing duplicate symbols.
This restriction can be lifted in one of the following two ways.
1. Teaching gcc that those symbols aren't going to be located near text. Most likely a new variable attribute.
2. Reserving memory area near builtin text so that module text and data can be loaded near builtin text. Percpu allocator already supports reserved area for module percpu variables in the first chunk, so half of the problem is already solved.
#2 is much more likely and probably the right thing to do. The only problem is that alpha and s390 are very difficult to come by. Fortunately, the uniqueness restriction is more of annoyance than pain. For the time being, I think it should be okay but if anyone is interested in lifting this restriction, I'll be more than happy to help.
Thanks.
---
Fenghua Yu (1):
ia64: Fix setup_per_cpu_areas() compilation error
Jesper Nilsson (1):
CRIS: Change DEFINE_PER_CPU of current_pgd to be non volatile.
Michal Simek (1):
microblaze: include EXIT_TEXT to _stext
Tejun Heo (46):
percpu: use dynamic percpu allocator as the default percpu allocator linker script: throw away .discard section
percpu: cleanup percpu array definitions
percpu: use DEFINE_PER_CPU_SHARED_ALIGNED()
percpu: clean up percpu variable definitions
percpu: implement optional weak percpu definitions
alpha: kill unnecessary __used attribute in PER_CPU_ATTRIBUTES
alpha: switch to dynamic percpu allocator
s390: switch to dynamic percpu allocator
sparc64: fix build breakage introduced by percpu-convert-most patchset
percpu: use __weak only in the definition of weak percpu variables Merge branch 'master' into for-next
x86: make pcpu_chunk_addr_search() matching stricter
percpu: drop @unit_size from embed first chunk allocator x86,percpu: generalize 4k first chunk allocator
percpu: make 4k first chunk allocator map memory
x86,percpu: generalize lpage first chunk allocator
percpu: simplify pcpu_setup_first_chunk()
percpu: reorder a few functions in mm/percpu.c
percpu: drop pcpu_chunk->page[]
percpu: allow non-linear / sparse cpu -> unit mapping
percpu: teach large page allocator about NUMA
linker script: unify usage of discard definition
percpu: add dummy pcpu_lpage_remapped() for !CONFIG_SMP
Merge branch 'percpu-for-linus' into percpu-for-next
percpu: fix pcpu_reclaim() locking
percpu: improve boot messages
percpu: rename 4k first chunk allocator to page
percpu: build first chunk allocators selectively
percpu: generalize first chunk allocator selection
percpu: drop @static_size from first chunk allocators
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: add pcpu_unit_offsets[]
percpu: add chunk->base_addr
vmalloc: separate out insert_vmalloc_vm()
vmalloc: implement pcpu_get_vm_areas()
percpu: use group information to allocate vmap areas sparsely
percpu: update embedding first chunk allocator to handle sparse units x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: kill lpage first chunk allocator
sparc64: use embedding percpu first chunk allocator
powerpc64: convert to dynamic percpu allocator
Merge branch 'for-next' into for-linus
Documentation/kernel-parameters.txt | 11 +- Makefile | 2 +- arch/alpha/include/asm/percpu.h | 100 +-- arch/alpha/include/asm/tlbflush.h | 1 + arch/alpha/kernel/vmlinux.lds.S | 9 +- arch/arm/kernel/vmlinux.lds.S | 1 + arch/avr32/kernel/vmlinux.lds.S | 9 +- arch/blackfin/kernel/vmlinux.lds.S | 5 +- arch/blackfin/mm/sram-alloc.c | 6 +- arch/cris/include/asm/mmu_context.h | 3 +- arch/cris/kernel/vmlinux.lds.S | 9 +- arch/cris/mm/fault.c | 2 +- arch/frv/kernel/vmlinux.lds.S | 2 + arch/h8300/kernel/vmlinux.lds.S | 5 +- arch/ia64/Kconfig | 3 + arch/ia64/kernel/setup.c | 6 + arch/ia64/kernel/smp.c | 3 +- arch/ia64/kernel/vmlinux.lds.S | 16 +- arch/ia64/sn/kernel/setup.c | 2 +- arch/m32r/kernel/vmlinux.lds.S | 10 +- arch/m68k/kernel/vmlinux-std.lds | 10 +- arch/m68k/kernel/vmlinux-sun3.lds | 9 +- arch/m68knommu/kernel/vmlinux.lds.S | 7 +- arch/microblaze/kernel/vmlinux.lds.S | 6 +- arch/mips/kernel/vmlinux.lds.S | 21 +- arch/mn10300/kernel/vmlinux.lds.S | 8 +- arch/parisc/kernel/vmlinux.lds.S | 8 +- arch/powerpc/Kconfig | 3 + arch/powerpc/kernel/setup_64.c | 61 +- arch/powerpc/kernel/vmlinux.lds.S | 9 +- arch/powerpc/mm/stab.c | 2 +- arch/powerpc/platforms/ps3/smp.c | 2 +- arch/s390/include/asm/percpu.h | 32 +- arch/s390/kernel/vmlinux.lds.S | 9 +- arch/sh/kernel/vmlinux.lds.S | 10 +- arch/sparc/Kconfig | 2 +- arch/sparc/kernel/smp_64.c | 132 +--- arch/sparc/kernel/vmlinux.lds.S | 8 +- arch/um/include/asm/common.lds.S | 5 - arch/um/kernel/dyn.lds.S | 2 + arch/um/kernel/uml.lds.S | 2 + arch/x86/Kconfig | 5 +- arch/x86/include/asm/percpu.h | 9 - arch/x86/kernel/cpu/cpu_debug.c | 4 +- arch/x86/kernel/cpu/mcheck/mce.c | 8 +- arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +- arch/x86/kernel/cpu/perf_counter.c | 14 +- arch/x86/kernel/setup_percpu.c | 364 +------- arch/x86/kernel/vmlinux.lds.S | 11 +- arch/x86/mm/pageattr.c | 21 +- arch/xtensa/kernel/vmlinux.lds.S | 13 +- block/as-iosched.c | 10 +- block/cfq-iosched.c | 10 +- drivers/cpufreq/cpufreq_conservative.c | 12 +- drivers/cpufreq/cpufreq_ondemand.c | 15 +- drivers/xen/events.c | 13 +- include/asm-generic/vmlinux.lds.h | 24 +- include/linux/percpu-defs.h | 66 ++- include/linux/percpu.h | 88 ++- include/linux/vmalloc.h | 6 + init/main.c | 24 - kernel/module.c | 6 +- kernel/perf_counter.c | 6 +- kernel/sched.c | 4 +- kernel/trace/trace_events.c | 6 +- lib/Kconfig.debug | 15 + mm/Makefile | 2 +- mm/allocpercpu.c | 28 + mm/kmemleak-test.c | 6 +- mm/page-writeback.c | 5 +- mm/percpu.c | 1420 ++++++++++++++++++++++++-------- mm/quicklist.c | 2 +- mm/slub.c | 4 +- mm/vmalloc.c | 338 +++++++- net/ipv4/syncookies.c | 5 +- net/ipv6/syncookies.c | 5 +- net/rds/ib_stats.c | 2 +- net/rds/iw_stats.c | 2 +- net/rds/page.c | 2 +- scripts/module-common.lds | 8 + 80 files changed, 1910 insertions(+), 1228 deletions(-) create mode 100644 scripts/module-common.lds
--
tejun
Quoted 2 lines · Tejun Heo
* All arches except for ia64 have been converted to use the new allocator.
Any plans for this? The percpu operations patchset
requires the new allocator to work on all platforms and I am wondering when I should repost the set.
Quoted 8 lines · Christoph Lameter
Quoted 2 lines · Tejun Heo
* All arches except for ia64 have been converted to use the new allocator.
Any plans for this? The percpu operations patchset
requires the new allocator to work on all platforms and I am wondering when I should repost the set.
I've been trying to get a cheap second hand itanium machine but itanic really seems to have sunk pretty well. It's almost impossible to find one here. I guess I'll have to bite the bullet and do it remotely. There gotta be one with serial console and power control hooked up somewhere in the company lab. I'll try to locate one.
Thanks.
Signature · 1 line
tejun
Quoted 10 lines · Tejun Heo
Quoted 8 lines · Christoph Lameter
Quoted 2 lines · Tejun Heo
* All arches except for ia64 have been converted to use the new allocator.
Any plans for this? The percpu operations patchset
requires the new allocator to work on all platforms and I am wondering when I should repost the set.
Quoted 5 lines
I've been trying to get a cheap second hand itanium machine but itanic really seems to have sunk pretty well. It's almost impossible to find one here. I guess I'll have to bite the bullet and do it remotely. There gotta be one with serial console and power control hooked up somewhere in the company lab. I'll try to locate one.
Maybe Mike knows of some way to get access to one?
Quoted 10 lines · Christoph Lameter
Quoted 8 lines · Tejun Heo
Quoted 7 lines · Christoph Lameter
Quoted 2 lines · Tejun Heo
* All arches except for ia64 have been converted to use the new allocator.
Any plans for this? The percpu operations patchset
requires the new allocator to work on all platforms and I am wondering when I should repost the set.
Quoted 7 lines
Quoted 5 lines
I've been trying to get a cheap second hand itanium machine but itanic really seems to have sunk pretty well. It's almost impossible to find one here. I guess I'll have to bite the bullet and do it remotely. There gotta be one with serial console and power control hooked up somewhere in the company lab. I'll try to locate one.
Maybe Mike knows of some way to get access to one?
We certainly have some in our labs but I'm not sure of one that's externally accessible. If there's a pre-defined test you'd like to run, you can send me the details. Otherwise, I'll check around and see if there's a system available remotely.
Cheers,
Mike
Hello,
Quoted 4 lines · Mike Travis
We certainly have some in our labs but I'm not sure of one that's externally accessible. If there's a pre-defined test you'd like to run, you can send me the details. Otherwise, I'll check around and see if there's a system available remotely.
The proposed broken patch is in the following thread. It works on ski emulator but ski doesn't support SMP, so...
http://thread.gmane.org/gmane.linux.kernel.cross-arch/4132
The patch shouldn't be too broken. It probably needs slight tweaks here and there. Just testing and providing logs would be helpful enough.
Thanks.
Signature · 1 line
tejun
Mike, if you can not find one, let me know. I would try the benchmarkers. IIRC, they may have those already ready to go.
Tejun, I have an SGI Prism at home that is normally powered off. I could power that up, get you set up to access it, and let you lose. There are basic commands for using the L2 to power on and off and to reset. I think it is currently set up with some bad dimms so I would need to remove those before this evolution.
I wouldn't mind helping with the patches, but I have no time right now.
Thanks,
Robin
Quoted 26 lines · Tejun Heo
Hello,
Quoted 4 lines · Mike Travis
We certainly have some in our labs but I'm not sure of one that's externally accessible. If there's a pre-defined test you'd like to run, you can send me the details. Otherwise, I'll check around and see if there's a system available remotely.
The proposed broken patch is in the following thread. It works on ski emulator but ski doesn't support SMP, so...
http://thread.gmane.org/gmane.linux.kernel.cross-arch/4132
The patch shouldn't be too broken. It probably needs slight tweaks here and there. Just testing and providing logs would be helpful enough.
Thanks.
Signature · 6 lines
tejun -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Of course, you could ignore this from 7 months ago if you like. I had resorted my lkml mailbox and then got myself confused. The offer does stand if you still need access.
Thanks,
Robin
Quoted 48 lines · Robin Holt
Mike, if you can not find one, let me know. I would try the benchmarkers. IIRC, they may have those already ready to go.
Tejun, I have an SGI Prism at home that is normally powered off. I could power that up, get you set up to access it, and let you lose. There are basic commands for using the L2 to power on and off and to reset. I think it is currently set up with some bad dimms so I would need to remove those before this evolution.
I wouldn't mind helping with the patches, but I have no time right now.
Thanks,
RobinQuoted 11 lines · Tejun Heo
Hello,
Quoted 4 lines · Mike Travis
We certainly have some in our labs but I'm not sure of one that's externally accessible. If there's a pre-defined test you'd like to run, you can send me the details. Otherwise, I'll check around and see if there's a system available remotely.
The proposed broken patch is in the following thread. It works on ski emulator but ski doesn't support SMP, so...
Quoted 15 lines
http://thread.gmane.org/gmane.linux.kernel.cross-arch/4132
The patch shouldn't be too broken. It probably needs slight tweaks here and there. Just testing and providing logs would be helpful enough.
Thanks.
Signature · 6 lines
tejun -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hello,
Quoted 3 lines · Robin Holt
Of course, you could ignore this from 7 months ago if you like. I had resorted my lkml mailbox and then got myself confused. The offer does stand if you still need access.
Heh, yeah, I found a couple itanium machines in suse machine room. Thanks anyway.
Signature · 1 line
tejun