Skip to contentSkip to conversation

ixgbevf: Fix link speed display

PATCH Applied Jeff Kirsher 2 participants 2 messages Apr 27, 2010

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Jeff Kirsher

author
#0 lore raw

PATCH 1/1 ixgbevf: Fix link speed display

From: Greg Rose <[email protected]>

The ixgbevf driver would always report 10Gig speeds even when the link speed is downshifted to 1Gig. This patch fixes that problem.

Signed-off-by Greg Rose <[email protected]>
Signed-off-by Jeff Kirsher <[email protected]>

---

 drivers/net/ixgbevf/defines.h |   12 +++++++-----
 drivers/net/ixgbevf/vf.c      |    3 ++-
 2 files changed, 9 insertions(+), 6 deletions(-)
drivers/net/ixgbevf/defines.h +7 -5
index c44fdb0..ca2c81f 100644
@@ -41,11 +41,13 @@ typedef u32 ixgbe_link_speed;
 #define IXGBE_LINK_SPEED_1GB_FULL       0x0020
 #define IXGBE_LINK_SPEED_10GB_FULL      0x0080
 
-#define IXGBE_CTRL_RST          0x04000000 /* Reset (SW) */
-#define IXGBE_RXDCTL_ENABLE     0x02000000 /* Enable specific Rx Queue */
-#define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
-#define IXGBE_LINKS_UP          0x40000000
-#define IXGBE_LINKS_SPEED       0x20000000
+#define IXGBE_CTRL_RST              0x04000000 /* Reset (SW) */
+#define IXGBE_RXDCTL_ENABLE         0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_TXDCTL_ENABLE         0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_LINKS_UP              0x40000000
+#define IXGBE_LINKS_SPEED_82599     0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599  0x20000000
 
 /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
 #define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE  8
drivers/net/ixgbevf/vf.c +2 -1
index 852e9c4..f6f9299 100644
@@ -359,7 +359,8 @@ static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
 	else
 		*link_up = false;
 
-	if (links_reg & IXGBE_LINKS_SPEED)
+	if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+	    IXGBE_LINKS_SPEED_10G_82599)
 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
 	else
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;