Skip to contentSkip to conversation

scsi: update drivers & tools URL references

PATCH New [email protected] 1 participant 1 message Apr 27, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 23/28 scsi: update drivers & tools URL references

From: Randy Dunlap <[email protected]>

Change torque.net references for SCSI drivers & tools to their current locations (sg.danny.cz/sg). Remove whitespace at ends of lines.

Same could be done for parport references at torque.net except that those files don't seem to have a home now.

Cc Douglas Gilbert <[email protected]>
Cc James Bottomley <[email protected]>

---

 .mailmap                                |    2 
 Documentation/DocBook/scsi.tmpl         |    2 
 Documentation/scsi/scsi-generic.txt     |   30 ++---
 Documentation/scsi/scsi.txt             |   22 +--
 Documentation/scsi/scsi_mid_low_api.txt |  130 +++++++++++-----------
 MAINTAINERS                             |    2 
 drivers/scsi/Kconfig                    |    4 
 include/scsi/sg.h                       |   19 +--
 8 files changed, 106 insertions(+), 105 deletions(-)
.mailmap renamed from .mailmap~scsi-update-drivers-tools-url-references +1 -1
diff -puN .mailmap~scsi-update-drivers-tools-url-references .mailmap
@@ -34,7 +34,7 @@ David Brownell <[email protected]>
 David Woodhouse <[email protected]>
 Dmitry Eremin-Solenikov <[email protected]>
 Domen Puncer <[email protected]>
-Douglas Gilbert <[email protected]>
+Douglas Gilbert <[email protected]>
 Ed L. Cashin <[email protected]>
 Evgeniy Polyakov <[email protected]>
 Felipe W Damasio <[email protected]>
Documentation/DocBook/scsi.tmpl renamed from Documentation/DocBook/scsi.tmpl~scsi-update-drivers-tools-url-references +1 -1
diff -puN Documentation/DocBook/scsi.tmpl~scsi-update-drivers-tools-url-references Documentation/DocBook/scsi.tmpl
@@ -393,7 +393,7 @@
         </para>
         <para>
           For documentation see
-          <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+          <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
         </para>
 <!-- !Edrivers/scsi/scsi_debug.c -->
       </sect2>
Documentation/scsi/scsi-generic.txt renamed from Documentation/scsi/scsi-generic.txt~scsi-update-drivers-tools-url-references +15 -15
diff -puN Documentation/scsi/scsi-generic.txt~scsi-update-drivers-tools-url-references Documentation/scsi/scsi-generic.txt
@@ -18,7 +18,7 @@ and examples.
 Major versions of the sg driver
 ===============================
 There are three major versions of sg found in the linux kernel (lk):
-      - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) . 
+      - sg version 1 (original) from 1992 to early 1999 (lk 2.2.5) .
 	It is based in the sg_header interface structure.
       - sg version 2 from lk 2.2.6 in the 2.2 series. It is based on
 	an extended version of the sg_header interface structure.
@@ -29,28 +29,28 @@ There are three major versions of sg fou
 Sg driver documentation
 =======================
 The most recent documentation of the sg driver is kept at the Linux
-Documentation Project's (LDP) site: 
+Documentation Project's (LDP) site:
 http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
 This describes the sg version 3 driver found in the lk 2.4 series.
 The LDP renders documents in single and multiple page HTML, postscript
 and pdf. This document can also be found at:
-http://www.torque.net/sg/p/sg_v3_ho.html
+http://sg.danny.cz/sg/p/sg_v3_ho.html
 
 Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://www.torque.net/sg/p/scsi-generic.txt . A larger version
-is at:  http://www.torque.net/sg/p/scsi-generic_long.txt .
+be found at http://sg.danny.cz/sg/p/scsi-generic.txt . A larger version
+is at:  http://sg.danny.cz/sg/p/scsi-generic_long.txt .
 
 The original documentation for the sg driver (prior to lk 2.2.6) can be
-found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
+found at http://sg.danny.cz/sg/p/original/SCSI-Programming-HOWTO.txt
 and in the LDP archives.
 
 A changelog with brief notes can be found in the
-/usr/src/linux/include/scsi/sg.h file. Note that the glibc maintainers copy 
-and edit this file (removing its changelog for example) before placing it 
-in /usr/include/scsi/sg.h . Driver debugging information and other notes 
+/usr/src/linux/include/scsi/sg.h file. Note that the glibc maintainers copy
+and edit this file (removing its changelog for example) before placing it
+in /usr/include/scsi/sg.h . Driver debugging information and other notes
 can be found at the top of the /usr/src/linux/drivers/scsi/sg.c file.
 
-A more general description of the Linux SCSI subsystem of which sg is a 
+A more general description of the Linux SCSI subsystem of which sg is a
 part can be found at http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO .
 
 
@@ -60,8 +60,8 @@ There are two packages of sg utilities:
   - sg3_utils   for the sg version 3 driver found in lk 2.4
   - sg_utils    for the sg version 2 (and original) driver found in lk 2.2
                 and earlier
-Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://www.torque.net/sg and 
+Both packages will work in the lk 2.4 series; however, sg3_utils offers more
+capabilities. They can be found at: http://sg.danny.cz/sg/index.html and
 freshmeat.net
 
 Another approach is to look at the applications that use the sg driver.
@@ -73,14 +73,14 @@ Mapping of Linux kernel versions to sg d
 Here is a list of linux kernels in the 2.4 series that had new version
 of the sg driver:
       lk 2.4.0 : sg version 3.1.17
-      lk 2.4.7 : sg version 3.1.19 
+      lk 2.4.7 : sg version 3.1.19
       lk 2.4.10 : sg version 3.1.20  **
-      lk 2.4.17 : sg version 3.1.22 
+      lk 2.4.17 : sg version 3.1.22
 
 ** There were 3 changes to sg version 3.1.20 by third parties in the
    next six linux kernel versions.
 
-For reference here is a list of linux kernels in the 2.2 series that had 
+For reference here is a list of linux kernels in the 2.2 series that had
 new version of the sg driver:
       lk 2.2.0 : original sg version [with no version number]
       lk 2.2.6 : sg version 2.1.31
Documentation/scsi/scsi.txt renamed from Documentation/scsi/scsi.txt~scsi-update-drivers-tools-url-references +11 -11
diff -puN Documentation/scsi/scsi.txt~scsi-update-drivers-tools-url-references Documentation/scsi/scsi.txt
@@ -4,38 +4,38 @@ The Linux Documentation Project (LDP) ma
 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
 http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
 and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at http://www.torque.net/scsi/SCSI-2.4-HOWTO .
+It can also be found at http://sg.danny.cz/scsi/SCSI-2.4-HOWTO/index.html .
 
 
 Notes on using modules in the SCSI subsystem
 ============================================
-The scsi support in the linux kernel can be modularized in a number of 
+The scsi support in the linux kernel can be modularized in a number of
 different ways depending upon the needs of the end user.  To understand
 your options, we should first define a few terms.
 
-The scsi-core (also known as the "mid level") contains the core of scsi 
+The scsi-core (also known as the "mid level") contains the core of scsi
 support.  Without it you can do nothing with any of the other scsi drivers.
 The scsi core support can be a module (scsi_mod.o), or it can be built into
-the kernel. If the core is a module, it must be the first scsi module 
-loaded, and if you unload the modules, it will have to be the last one 
+the kernel. If the core is a module, it must be the first scsi module
+loaded, and if you unload the modules, it will have to be the last one
 unloaded.  In practice the modprobe and rmmod commands (and "autoclean")
 will enforce the correct ordering of loading and unloading modules in
 the SCSI subsystem.
 
-The individual upper and lower level drivers can be loaded in any order 
+The individual upper and lower level drivers can be loaded in any order
 once the scsi core is present in the kernel (either compiled in or loaded
 as a module).  The disk driver (sd_mod.o), cdrom driver (sr_mod.o),
-tape driver ** (st.o) and scsi generics driver (sg.o) represent the upper 
-level drivers to support the various assorted devices which can be 
-controlled.  You can for example load the tape driver to use the tape drive, 
+tape driver ** (st.o) and scsi generics driver (sg.o) represent the upper
+level drivers to support the various assorted devices which can be
+controlled.  You can for example load the tape driver to use the tape drive,
 and then unload it once you have no further need for the driver (and release
 the associated memory).
 
 The lower level drivers are the ones that support the individual cards that
 are supported for the hardware platform that you are running under. Those
 individual cards are often called Host Bus Adapters (HBAs). For example the
-aic7xxx.o driver is used to control all recent SCSI controller cards from 
-Adaptec. Almost all lower level drivers can be built either as modules or 
+aic7xxx.o driver is used to control all recent SCSI controller cards from
+Adaptec. Almost all lower level drivers can be built either as modules or
 built into the kernel.
 
 
Documentation/scsi/scsi_mid_low_api.txt renamed from Documentation/scsi/scsi_mid_low_api.txt~scsi-update-drivers-tools-url-references +65 -65

408 lines not on this page · raw message

MAINTAINERS renamed from MAINTAINERS~scsi-update-drivers-tools-url-references +1 -1
diff -puN MAINTAINERS~scsi-update-drivers-tools-url-references MAINTAINERS
@@ -4878,7 +4878,7 @@ F:	drivers/scsi/sr*
 SCSI SG DRIVER
 M:	Doug Gilbert <[email protected]>
 L:	[email protected]
-W:	http://www.torque.net/sg
+W:	http://sg.danny.cz/sg/index.html
 S:	Maintained
 F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
drivers/scsi/Kconfig renamed from drivers/scsi/Kconfig~scsi-update-drivers-tools-url-references +2 -2
diff -puN drivers/scsi/Kconfig~scsi-update-drivers-tools-url-references drivers/scsi/Kconfig
@@ -1600,8 +1600,8 @@ config SCSI_DEBUG
 	  each with multiple dummy SCSI devices (disks). It defaults to one
 	  host adapter with one dummy SCSI disk. Each dummy disk uses kernel
 	  RAM as storage (i.e. it is a ramdisk). To save space when multiple
-	  dummy disks are simulated, they share the same kernel RAM for 
-	  their storage. See <http://www.torque.net/sg/sdebug.html> for more
+	  dummy disks are simulated, they share the same kernel RAM for
+	  their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more
 	  information. This driver is primarily of use to those testing the
 	  SCSI and block subsystems. If unsure, say N.
 
include/scsi/sg.h renamed from include/scsi/sg.h~scsi-update-drivers-tools-url-references +10 -9
diff -puN include/scsi/sg.h~scsi-update-drivers-tools-url-references include/scsi/sg.h
@@ -16,7 +16,7 @@ Version 2 and 3 extensions to driver:
     Version: 3.5.34 (20060920)
     This version is for 2.6 series kernels.
 
-    For a full changelog see http://www.torque.net/sg
+    For a full changelog see http://sg.danny.cz/sg/index.html
 
 Map of SG verions to the Linux kernels in which they appear:
        ----------        ----------------------------------
@@ -44,28 +44,29 @@ Major new features in SG 3.x driver (cf 
  ** N.B. To use direct IO 'echo 1 > /proc/scsi/sg/allow_dio' or
          'echo 1 > /sys/module/sg/parameters/allow_dio' is needed.
          That attribute is 0 by default. **
- 
- Historical note: this SCSI pass-through driver has been known as "sg" for 
+
+ Historical note: this SCSI pass-through driver has been known as "sg" for
  a decade. In broader kernel discussions "sg" is used to refer to scatter
  gather techniques. The context should clarify which "sg" is referred to.
 
  Documentation
  =============
  A web site for the SG device driver can be found at:
-	http://www.torque.net/sg  [alternatively check the MAINTAINERS file]
+	http://sg.danny.cz/sg/index.html
+	[alternatively check the MAINTAINERS file]
  The documentation for the sg version 3 driver can be found at:
- 	http://www.torque.net/sg/p/sg_v3_ho.html
+ 	http://sg.danny.cz/sg/p/scsi-generic_v3.txt
  This is a rendering from DocBook source [change the extension to "sgml"
  or "xml"]. There are renderings in "ps", "pdf", "rtf" and "txt" (soon).
  The SG_IO ioctl is now found in other parts kernel (e.g. the block layer).
- For more information see http://www.torque.net/sg/sg_io.html
+ For more information see http://sg.danny.cz/sg/sg_io.html
 
  The older, version 2 documents discuss the original sg interface in detail:
-	http://www.torque.net/sg/p/scsi-generic.txt
-	http://www.torque.net/sg/p/scsi-generic_long.txt
+	http://sg.danny.cz/sg/p/scsi-generic.txt
+	http://sg.danny.cz/sg/p/scsi-generic_long.txt
  Also available: <kernel_source>/Documentation/scsi/scsi-generic.txt
 
- Utility and test programs are available at the sg web site. They are 
+ Utility and test programs are available at the sg web site. They are
  packaged as sg3_utils (for the lk 2.4 and 2.6 series) and sg_utils
  (for the lk 2.2 series).
 */

_