ixgbe: disable MSI-X by default on certain Cisco adapters
Subsystems (2)
PATCH v3 1/1 ixgbe: disable MSI-X by default on certain Cisco adapters
From: Nick Nunley <[email protected]>
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters.
---
drivers/net/ixgbe/ixgbe.h | 4 ++++ drivers/net/ixgbe/ixgbe_main.c | 17 ++++++++++++++++- 2 files changed, 20 insertions(+), 1 deletions(-)
drivers/net/ixgbe/ixgbe.h +4 -0
@@ -104,6 +104,10 @@#define MAX_EMULATION_MAC_ADDRS 16#define VMDQ_P (p) ((p) + adapter->num_vfs) +#define IXGBE_SUBDEV_ID_82598AF_MEZZ 0x0049 +#define IXGBE_SUBDEV_ID_82598AF_MENLO_Q_MEZZ 0x004a +#define IXGBE_SUBDEV_ID_82598AF_MENLO_E_MEZZ 0x004b +struct vf_data_storage {unsigned char vf_mac_addresses[ETH_ALEN ];u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES ];
drivers/net/ixgbe/ixgbe_main.c +16 -1
@@ -4314,6 +4314,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)int err =0 ;int vector, v_budget; +if (!(adapter->flags &IXGBE_FLAG_MSIX_CAPABLE )) + goto try_msi; +/* * It's easy to be greedy for MSI-X vectors, but it really * doesn't do us much good if we have a lot more vectors
@@ -4345,7 +4348,7 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)if (adapter->flags &IXGBE_FLAG_MSIX_ENABLED ) goto out; } - +try_msi: adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED ; adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED ; adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE ;
@@ -4626,6 +4629,18 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->ring_feature[RING_F_RSS ].indices = rss; adapter->flags |=IXGBE_FLAG_RSS_ENABLED ; adapter->ring_feature[RING_F_DCB ].indices =IXGBE_MAX_DCB_INDICES ; + adapter->flags |=IXGBE_FLAG_MSIX_CAPABLE ; +if (adapter->hw.device_id ==IXGBE_DEV_ID_82598AF_DUAL_PORT ) { +switch (adapter->hw.subsystem_device_id) { +case IXGBE_SUBDEV_ID_82598AF_MEZZ : +case IXGBE_SUBDEV_ID_82598AF_MENLO_Q_MEZZ : +case IXGBE_SUBDEV_ID_82598AF_MENLO_E_MEZZ : + adapter->flags &= ~IXGBE_FLAG_MSIX_CAPABLE ; +break ; +default : +break ; + } + }if (hw->mac.type == ixgbe_mac_82598EB) {if (hw->device_id ==IXGBE_DEV_ID_82598AT ) adapter->flags |=IXGBE_FLAG_FAN_FAIL_CAPABLE ;
From: Jeff Kirsher <[email protected]>
Date: Tue, 27 Apr 2010 19:45:26 -0700
Quoted 11 lines
From: Nick Nunley <[email protected]>
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters.
Signed-off-by Nicholas Nunley <[email protected]>Acked-by John Ronciak <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied.
Dave please revert the following patch because it is being fixed without a software workaround:
commit d5ffd75a27fade39ba5df3b07290c5a2c297b9bd
Author: Nicholas Nunley <[email protected]> Date: Tue Apr 27 19:47:49 2010 -0700
ixgbe: disable MSI-X by default on certain Cisco adapters
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters.
Signature · 2 lines
Cheers, Jeff
David Miller
maintainerFrom: Jeff Kirsher <[email protected]>
Date: Mon, 3 May 2010 15:16:07 -0700
Quoted 4 lines
Dave please revert the following patch because it is being fixed without a software workaround:
commit
d5ffd75a27fade39ba5df3b07290c5a2c297b9bd
Done.