Skip to contentSkip to conversation

ipmi: Only register one si per bmc

PATCH In review Corey Minyard 1 participant 1 message May 3, 2010 IPMI

lore
Share & tools
lore
#0 lore raw

PATCH 3/8 ipmi: Only register one si per bmc

From: Matthew Garrett <[email protected]>

Only register one si per bmc. Use any user-provided devices first, followed by the first device with an irq, followed by the first device discovered.

---

drivers/char/ipmi/ipmi_si_intf.c +27 -2
Index: linux-2.6/drivers/char/ipmi/ipmi_si_intf.c
===================================================================
@@ -3300,6 +3300,14 @@ static __devinit int init_ipmi_si(void)
 
 	hardcode_find_bmc();
 
+	/* If the user gave us a device, they presumably want us to use it */
+	mutex_lock(&smi_infos_lock);
+	if (!list_empty(&smi_infos)) {
+		mutex_unlock(&smi_infos_lock);
+		return 0;
+	}
+	mutex_unlock(&smi_infos_lock);
+
 #ifdef CONFIG_DMI
 	dmi_find_bmc();
 #endif
@@ -3323,10 +3331,27 @@ static __devinit int init_ipmi_si(void)
 	of_register_platform_driver(&ipmi_of_platform_driver);
 #endif
 
+	/* Try to register something with interrupts first */
+
 	mutex_lock(&smi_infos_lock);
 	list_for_each_entry(e, &smi_infos, link) {
-		if (!e->si_sm)
-			try_smi_init(e);
+		if (e->irq) {
+			if (!try_smi_init(e)) {
+				mutex_unlock(&smi_infos_lock);
+				return 0;
+			}
+		}
+	}
+
+	/* Fall back to the preferred device */
+
+	list_for_each_entry(e, &smi_infos, link) {
+		if (!e->irq) {
+			if (!try_smi_init(e)) {
+				mutex_unlock(&smi_infos_lock);
+				return 0;
+			}
+		}
 	}
 	mutex_unlock(&smi_infos_lock);