ARM: S5PV210: Add S5PV210 GPIO support
Subsystems (3)
PATCH v2 1/2 ARM: S5PV210: Add S5PV210 GPIO support
This patch adds GPIOlib support for S5PV210.
--- arch/arm/mach-s5pv210/Makefile | 2 +- arch/arm/mach-s5pv210/gpio.c | 495 ++++++++++++++++++++++++ arch/arm/mach-s5pv210/include/mach/gpio.h | 97 +++++- arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 77 ++++ 4 files changed, 667 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-s5pv210/gpio.c create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.h
arch/arm/mach-s5pv210/Makefile +1 -1
@@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpio.o # machine support
arch/arm/mach-s5pv210/gpio.c new file +495 -0
495 lines not on this page · raw message
arch/arm/mach-s5pv210/include/mach/gpio.h +94 -3
119 lines not on this page · raw message
arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file +77 -0
77 lines not on this page · raw message
Signature · 1 line
1.6.2.5
PATCH v2 1/2 ARM: S5PV210: Add S5PV210 GPIO support
Hi,
Quoted 45 lines · Kukjin Kim
This patch adds GPIOlib support for S5PV210.
Signed-off-by Kukjin Kim <[email protected]>---
?arch/arm/mach-s5pv210/Makefile ? ? ? ? ? ? ? ? | ? ?2 +- ?arch/arm/mach-s5pv210/gpio.c ? ? ? ? ? ? ? ? ? | ?495 ++++++++++++++++++++++++ ?arch/arm/mach-s5pv210/include/mach/gpio.h ? ? ?| ? 97 +++++- ?arch/arm/mach-s5pv210/include/mach/regs-gpio.h | ? 77 ++++?4 files changed, 667 insertions(+), 4 deletions(-) ?create mode 100644
arch/arm/mach-s5pv210/gpio.c?create mode 100644arch/arm/mach-s5pv210/include/mach/regs-gpio.harch/arm/mach-s5pv210/Makefile +0
-0@@ -12,7 +12,7 @@ obj- ? ? ? ? ? ? ? ? ? ? ? ? ?:=?# Core support for S5PV210 system
arch/arm/mach-s5pv210/Makefile +1
-1-obj-$(CONFIG_CPU_S5PV210) ? ? ?+= cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) ? ? ?+= cpu.o init.o clock.o gpio.o?# machine support
arch/arm/mach-s5pv210/gpio.c new file +14
-0@@ -0,0 +1,495 @@ +/* linux/arch/arm/mach-s5pv210/gpio.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* ? ? ? ? ? ? http://www.samsung.com/ +* +* S5PV210 - GPIOlib support +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h>
arch/arm/mach-s5pv210/gpio.c line 24
Quoted 10 lines
arch/arm/mach-s5pv210/gpio.c new file +10
-0+#include <linux/io.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/regs-gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +static struct s3c_gpio_cfg gpio_cfg = { + ? ? ? .cfg_eint ? ? ? = 0xf,
What's the purpose of 'cfg_eint'? As I know no place to use it.
Quoted 277 lines
arch/arm/mach-s5pv210/gpio.c new file +277
-0+ ? ? ? .set_config ? ? = s3c_gpio_setcfg_s3c64xx_4bit, + ? ? ? .set_pull ? ? ? = s3c_gpio_setpull_updown, + ? ? ? .get_pull ? ? ? = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + ? ? ? .set_config ? ? = s3c_gpio_setcfg_s3c64xx_4bit, + ? ? ? .set_pull ? ? ? = s3c_gpio_setpull_updown, + ? ? ? .get_pull ? ? ? = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + ? ? ? { + ? ? ? ? ? ? ? .base ? = S5PV210_GPA0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPA0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_A0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPA0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPA1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPA1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_A1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPA1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPB_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPB(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_B_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPB", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPC0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPC0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_C0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPC0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPC1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPC1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_C1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPC1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPD0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPD0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_D0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPD0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPD1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPD1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_D1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPD1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPE0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPE0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_E0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPE0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPE1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPE1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_E1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPE1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPF0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPF0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_F0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPF0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPF1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPF1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_F1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPF1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPF2_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPF2(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_F2_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPF2", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPF3_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPF3(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_F3_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPF3", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPG0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPG0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_G0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPG0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPG1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPG1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_G1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPG1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPG2_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPG2(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_G2_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPG2", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPG3_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPG3(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_G3_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPG3", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPH0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPH0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_H0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPH0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPH1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPH1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_H1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPH1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPH2_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPH2(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_H2_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPH2", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPH3_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPH3(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_H3_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPH3", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPI_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPI(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_I_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPI", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPJ0_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPJ0(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_J0_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ0", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPJ1_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPJ1(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_J1_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ1", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPJ2_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPJ2(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_J2_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ2", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPJ3_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPJ3(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_J3_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ3", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_GPJ4_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_GPJ4(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_J4_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ4", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP01_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP01(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP01_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP01", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP02_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP02(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP02_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP02", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP03_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP03(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP03_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP03", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP04_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP04(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP04_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP04", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP05_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP05(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP05_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP05", + ? ? ? ? ? ? ? }, + ? ? ? }, { + ? ? ? ? ? ? ? .base ? = S5PV210_MP06_BASE, + ? ? ? ? ? ? ? .config = &gpio_cfg_noint, + ? ? ? ? ? ? ? .chip ? = { + ? ? ? ? ? ? ? ? ? ? ? .base ? = S5PV210_MP06(0), + ? ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV210_GPIO_MP06_NR, + ? ? ? ? ? ? ? ? ? ? ? .label ?= "MP06", + ? ? ? ? ? ? ? }, + ? ? ? }, {
PATCH v2 1/2 ARM: S5PV210: Add S5PV210 GPIO support
In reply to Kukjin KimQuoted 65 lines · Kukjin Kim
This patch adds GPIOlib support for S5PV210.
Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s5pv210/Makefile | 2 +- arch/arm/mach-s5pv210/gpio.c | 495 ++++++++++++++++++++++++ arch/arm/mach-s5pv210/include/mach/gpio.h | 97 +++++- arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 77 ++++ 4 files changed, 667 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-s5pv210/gpio.c create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.harch/arm/mach-s5pv210/Makefile +1
-1@@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpio.o # machine supportarch/arm/mach-s5pv210/gpio.c new file +34
-0@@ -0,0 +1,495 @@ +/* linux/arch/arm/mach-s5pv210/gpio.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* S5PV210 - GPIOlib support +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/regs-gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .cfg_eint =0xf , + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +};
arch/arm/mach-s5pv210/gpio.c line 44
Quoted 10 lines
arch/arm/mach-s5pv210/gpio.c new file +10
-0+ +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + { + .base =S5PV210_GPA0_BASE , + .config = &gpio_cfg, + .chip = { + .base =S5PV210_GPA0 (0 ), + .ngpio =S5PV210_GPIO_A0_NR , + .label ="GPA0" , + },
given that &gpio_cfg is the default, it would have been easier to make a wrapper for the registration code and have it set any null config settign to gpio_cfg.
Quoted 648 lines
arch/arm/mach-s5pv210/gpio.c new file +451
-0+ }, { + .base = S5PV210_GPA1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .base = S5PV210_GPB_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5PV210_GPC0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .base = S5PV210_GPC1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .base = S5PV210_GPD0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .base = S5PV210_GPD1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .base = S5PV210_GPE0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .base = S5PV210_GPE1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .base = S5PV210_GPF0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .base = S5PV210_GPF1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .base = S5PV210_GPF2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .base = S5PV210_GPF3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .base = S5PV210_GPG0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .base = S5PV210_GPG1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .base = S5PV210_GPG2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .base = S5PV210_GPG3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .base = S5PV210_GPH0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = S5PV210_GPH1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = S5PV210_GPH2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = S5PV210_GPH3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + }, + }, { + .base = S5PV210_GPI_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5PV210_GPJ0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .base = S5PV210_GPJ1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .base = S5PV210_GPJ2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .base = S5PV210_GPJ3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .base = S5PV210_GPJ4_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .base = S5PV210_MP01_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .base = S5PV210_MP02_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .base = S5PV210_MP03_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .base = S5PV210_MP04_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .base = S5PV210_MP05_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { + .base = S5PV210_MP06_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP06(0), + .ngpio = S5PV210_GPIO_MP06_NR, + .label = "MP06", + }, + }, { + .base = S5PV210_MP07_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP07(0), + .ngpio = S5PV210_GPIO_MP07_NR, + .label = "MP07", + }, + }, { + .base = S5PV210_MP10_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP10(0), + .ngpio = S5PV210_GPIO_MP10_NR, + .label = "MP10", + }, + }, { + .base = S5PV210_MP11_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP11(0), + .ngpio = S5PV210_GPIO_MP11_NR, + .label = "MP11", + }, + }, { + .base = S5PV210_MP12_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP12(0), + .ngpio = S5PV210_GPIO_MP12_NR, + .label = "MP12", + }, + }, { + .base = S5PV210_MP13_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP13(0), + .ngpio = S5PV210_GPIO_MP13_NR, + .label = "MP13", + }, + }, { + .base = S5PV210_MP14_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP14(0), + .ngpio = S5PV210_GPIO_MP14_NR, + .label = "MP14", + }, + }, { + .base = S5PV210_MP15_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP15(0), + .ngpio = S5PV210_GPIO_MP15_NR, + .label = "MP15", + }, + }, { + .base = S5PV210_MP16_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP16(0), + .ngpio = S5PV210_GPIO_MP16_NR, + .label = "MP16", + }, + }, { + .base = S5PV210_MP17_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP17(0), + .ngpio = S5PV210_GPIO_MP17_NR, + .label = "MP17", + }, + }, { + .base = S5PV210_MP18_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP18(0), + .ngpio = S5PV210_GPIO_MP18_NR, + .label = "MP18", + }, + }, { + .base = S5PV210_MP20_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP20(0), + .ngpio = S5PV210_GPIO_MP20_NR, + .label = "MP20", + }, + }, { + .base = S5PV210_MP21_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP21(0), + .ngpio = S5PV210_GPIO_MP21_NR, + .label = "MP21", + }, + }, { + .base = S5PV210_MP22_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP22(0), + .ngpio = S5PV210_GPIO_MP22_NR, + .label = "MP22", + }, + }, { + .base = S5PV210_MP23_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP23(0), + .ngpio = S5PV210_GPIO_MP23_NR, + .label = "MP23", + }, + }, { + .base = S5PV210_MP24_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP24(0), + .ngpio = S5PV210_GPIO_MP24_NR, + .label = "MP24", + }, + }, { + .base = S5PV210_MP25_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP25(0), + .ngpio = S5PV210_GPIO_MP25_NR, + .label = "MP25", + }, + }, { + .base = S5PV210_MP26_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP26(0), + .ngpio = S5PV210_GPIO_MP26_NR, + .label = "MP26", + }, + }, { + .base = S5PV210_MP27_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP27(0), + .ngpio = S5PV210_GPIO_MP27_NR, + .label = "MP27", + }, + }, { + .base = S5PV210_MP28_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP28(0), + .ngpio = S5PV210_GPIO_MP28_NR, + .label = "MP28", + }, + }, { + .base = S5PV210_ETC0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_ETC0(0), + .ngpio = S5PV210_GPIO_ETC0_NR, + .label = "ETC0", + }, + }, { + .base = S5PV210_ETC1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_ETC1(0), + .ngpio = S5PV210_GPIO_ETC1_NR, + .label = "ETC1", + }, + }, { + .base = S5PV210_ETC2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_ETC2(0), + .ngpio = S5PV210_GPIO_ETC2_NR, + .label = "ETC2", + }, + }, { + .base = S5PV210_ETC4_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_ETC4(0), + .ngpio = S5PV210_GPIO_ETC4_NR, + .label = "ETC4", + }, + }, +}; + +static __init int s5pv210_gpiolib_init (void ) +{ +samsung_gpiolib_add_4bit_chips (s5pv210_gpio_4bit, +ARRAY_SIZE (s5pv210_gpio_4bit)); + +return 0 ; +} +core_initcall (s5pv210_gpiolib_init);arch/arm/mach-s5pv210/include/mach/gpio.h +94
-3@@ -47,6 +47,39 @@#define S5PV210_GPIO_J3_NR (8)#define S5PV210_GPIO_J4_NR (5) +#define S5PV210_GPIO_MP01_NR (8) +#define S5PV210_GPIO_MP02_NR (4) +#define S5PV210_GPIO_MP03_NR (8) +#define S5PV210_GPIO_MP04_NR (8) +#define S5PV210_GPIO_MP05_NR (8) +#define S5PV210_GPIO_MP06_NR (8) +#define S5PV210_GPIO_MP07_NR (8) + +#define S5PV210_GPIO_MP10_NR (8) +#define S5PV210_GPIO_MP11_NR (8) +#define S5PV210_GPIO_MP12_NR (8) +#define S5PV210_GPIO_MP13_NR (8) +#define S5PV210_GPIO_MP14_NR (8) +#define S5PV210_GPIO_MP15_NR (8) +#define S5PV210_GPIO_MP16_NR (8) +#define S5PV210_GPIO_MP17_NR (8) +#define S5PV210_GPIO_MP18_NR (7) + +#define S5PV210_GPIO_MP20_NR (8) +#define S5PV210_GPIO_MP21_NR (8) +#define S5PV210_GPIO_MP22_NR (8) +#define S5PV210_GPIO_MP23_NR (8) +#define S5PV210_GPIO_MP24_NR (8) +#define S5PV210_GPIO_MP25_NR (8) +#define S5PV210_GPIO_MP26_NR (8) +#define S5PV210_GPIO_MP27_NR (8) +#define S5PV210_GPIO_MP28_NR (7) + +#define S5PV210_GPIO_ETC0_NR (6) +#define S5PV210_GPIO_ETC1_NR (8) +#define S5PV210_GPIO_ETC2_NR (8) +#define S5PV210_GPIO_ETC4_NR (6) +/* GPIO bank numbers */ /* CONFIG_S3C_GPIO_SPACE allows the user to select extra @@ -85,6 +118,35 @@ enum s5p_gpio_number {S5PV210_GPIO_J2_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J1 ),S5PV210_GPIO_J3_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J2 ),S5PV210_GPIO_J4_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J3 ), +S5PV210_GPIO_MP01_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J4 ), +S5PV210_GPIO_MP02_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP01 ), +S5PV210_GPIO_MP03_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP02 ), +S5PV210_GPIO_MP04_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP03 ), +S5PV210_GPIO_MP05_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP04 ), +S5PV210_GPIO_MP06_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP05 ), +S5PV210_GPIO_MP07_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP06 ), +S5PV210_GPIO_MP10_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP07 ), +S5PV210_GPIO_MP11_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP10 ), +S5PV210_GPIO_MP12_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP11 ), +S5PV210_GPIO_MP13_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP12 ), +S5PV210_GPIO_MP14_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP13 ), +S5PV210_GPIO_MP15_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP14 ), +S5PV210_GPIO_MP16_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP15 ), +S5PV210_GPIO_MP17_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP16 ), +S5PV210_GPIO_MP18_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP17 ), +S5PV210_GPIO_MP20_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP18 ), +S5PV210_GPIO_MP21_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP20 ), +S5PV210_GPIO_MP22_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP21 ), +S5PV210_GPIO_MP23_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP22 ), +S5PV210_GPIO_MP24_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP23 ), +S5PV210_GPIO_MP25_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP24 ), +S5PV210_GPIO_MP26_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP25 ), +S5PV210_GPIO_MP27_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP26 ), +S5PV210_GPIO_MP28_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP27 ), +S5PV210_GPIO_ETC0_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP28 ), +S5PV210_GPIO_ETC1_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_ETC0 ), +S5PV210_GPIO_ETC2_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_ETC1 ), + S5PV210_GPIO_ETC4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_ETC2), };/* S5PV210 GPIO number definitions */ @@ -115,13 +177,42 @@ enum s5p_gpio_number {#define S5PV210_GPJ2 (_nr) (S5PV210_GPIO_J2_START + (_nr))#define S5PV210_GPJ3 (_nr) (S5PV210_GPIO_J3_START + (_nr))#define S5PV210_GPJ4 (_nr) (S5PV210_GPIO_J4_START + (_nr)) +#define S5PV210_MP01 (_nr) (S5PV210_GPIO_MP01_START + (_nr)) +#define S5PV210_MP02 (_nr) (S5PV210_GPIO_MP02_START + (_nr)) +#define S5PV210_MP03 (_nr) (S5PV210_GPIO_MP03_START + (_nr)) +#define S5PV210_MP04 (_nr) (S5PV210_GPIO_MP04_START + (_nr)) +#define S5PV210_MP05 (_nr) (S5PV210_GPIO_MP05_START + (_nr)) +#define S5PV210_MP06 (_nr) (S5PV210_GPIO_MP06_START + (_nr)) +#define S5PV210_MP07 (_nr) (S5PV210_GPIO_MP07_START + (_nr)) +#define S5PV210_MP10 (_nr) (S5PV210_GPIO_MP10_START + (_nr)) +#define S5PV210_MP11 (_nr) (S5PV210_GPIO_MP11_START + (_nr)) +#define S5PV210_MP12 (_nr) (S5PV210_GPIO_MP12_START + (_nr)) +#define S5PV210_MP13 (_nr) (S5PV210_GPIO_MP13_START + (_nr)) +#define S5PV210_MP14 (_nr) (S5PV210_GPIO_MP14_START + (_nr)) +#define S5PV210_MP15 (_nr) (S5PV210_GPIO_MP15_START + (_nr)) +#define S5PV210_MP16 (_nr) (S5PV210_GPIO_MP16_START + (_nr)) +#define S5PV210_MP17 (_nr) (S5PV210_GPIO_MP17_START + (_nr)) +#define S5PV210_MP18 (_nr) (S5PV210_GPIO_MP18_START + (_nr)) +#define S5PV210_MP20 (_nr) (S5PV210_GPIO_MP20_START + (_nr)) +#define S5PV210_MP21 (_nr) (S5PV210_GPIO_MP21_START + (_nr)) +#define S5PV210_MP22 (_nr) (S5PV210_GPIO_MP22_START + (_nr)) +#define S5PV210_MP23 (_nr) (S5PV210_GPIO_MP23_START + (_nr)) +#define S5PV210_MP24 (_nr) (S5PV210_GPIO_MP24_START + (_nr)) +#define S5PV210_MP25 (_nr) (S5PV210_GPIO_MP25_START + (_nr)) +#define S5PV210_MP26 (_nr) (S5PV210_GPIO_MP26_START + (_nr)) +#define S5PV210_MP27 (_nr) (S5PV210_GPIO_MP27_START + (_nr)) +#define S5PV210_MP28 (_nr) (S5PV210_GPIO_MP28_START + (_nr)) +#define S5PV210_ETC0 (_nr) (S5PV210_GPIO_ETC0_START + (_nr)) +#define S5PV210_ETC1 (_nr) (S5PV210_GPIO_ETC1_START + (_nr)) +#define S5PV210_ETC2 (_nr) (S5PV210_GPIO_ETC2_START + (_nr)) +#define S5PV210_ETC4 (_nr) (S5PV210_GPIO_ETC4_START + (_nr))/* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_ETC4(S5PV210_GPIO_ETC4_NR) + 1)#define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ +/* define the number of gpios we need to the one after the ETC4() range */ +#define ARCH_NR_GPIOS (S5PV210_ETC4(S5PV210_GPIO_ETC4_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1)#include <asm-generic/gpio.h> arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file +65
-0@@ -0,0 +1,77 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* S5PV210 - GPIO register definitions +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +/* Base addresses for each of the banks */ + +#define S5PV210_GPA0_BASE (S5P_VA_GPIO + 0x000) +#define S5PV210_GPA1_BASE (S5P_VA_GPIO + 0x020) +#define S5PV210_GPB_BASE (S5P_VA_GPIO + 0x040) +#define S5PV210_GPC0_BASE (S5P_VA_GPIO + 0x060) +#define S5PV210_GPC1_BASE (S5P_VA_GPIO + 0x080) +#define S5PV210_GPD0_BASE (S5P_VA_GPIO + 0x0A0) +#define S5PV210_GPD1_BASE (S5P_VA_GPIO + 0x0C0) +#define S5PV210_GPE0_BASE (S5P_VA_GPIO + 0x0E0) +#define S5PV210_GPE1_BASE (S5P_VA_GPIO + 0x100) +#define S5PV210_GPF0_BASE (S5P_VA_GPIO + 0x120) +#define S5PV210_GPF1_BASE (S5P_VA_GPIO + 0x140) +#define S5PV210_GPF2_BASE (S5P_VA_GPIO + 0x160) +#define S5PV210_GPF3_BASE (S5P_VA_GPIO + 0x180) +#define S5PV210_GPG0_BASE (S5P_VA_GPIO + 0x1A0) +#define S5PV210_GPG1_BASE (S5P_VA_GPIO + 0x1C0) +#define S5PV210_GPG2_BASE (S5P_VA_GPIO + 0x1E0) +#define S5PV210_GPG3_BASE (S5P_VA_GPIO + 0x200) +#define S5PV210_GPH0_BASE (S5P_VA_GPIO + 0xC00) +#define S5PV210_GPH1_BASE (S5P_VA_GPIO + 0xC20) +#define S5PV210_GPH2_BASE (S5P_VA_GPIO + 0xC40) +#define S5PV210_GPH3_BASE (S5P_VA_GPIO + 0xC60) +#define S5PV210_GPI_BASE (S5P_VA_GPIO + 0x220) +#define S5PV210_GPJ0_BASE (S5P_VA_GPIO + 0x240) +#define S5PV210_GPJ1_BASE (S5P_VA_GPIO + 0x260) +#define S5PV210_GPJ2_BASE (S5P_VA_GPIO + 0x280) +#define S5PV210_GPJ3_BASE (S5P_VA_GPIO + 0x2A0) +#define S5PV210_GPJ4_BASE (S5P_VA_GPIO + 0x2C0) +#define S5PV210_MP01_BASE (S5P_VA_GPIO + 0x2E0) +#define S5PV210_MP02_BASE (S5P_VA_GPIO + 0x300) +#define S5PV210_MP03_BASE (S5P_VA_GPIO + 0x320) +#define S5PV210_MP04_BASE (S5P_VA_GPIO + 0x340) +#define S5PV210_MP05_BASE (S5P_VA_GPIO + 0x360) +#define S5PV210_MP06_BASE (S5P_VA_GPIO + 0x380) +#define S5PV210_MP07_BASE (S5P_VA_GPIO + 0x3A0) +#define S5PV210_MP10_BASE (S5P_VA_GPIO + 0x3C0) +#define S5PV210_MP11_BASE (S5P_VA_GPIO + 0x3E0) +#define S5PV210_MP12_BASE (S5P_VA_GPIO + 0x400) +#define S5PV210_MP13_BASE (S5P_VA_GPIO + 0x420) +#define S5PV210_MP14_BASE (S5P_VA_GPIO + 0x440) +#define S5PV210_MP15_BASE (S5P_VA_GPIO + 0x460) +#define S5PV210_MP16_BASE (S5P_VA_GPIO + 0x480) +#define S5PV210_MP17_BASE (S5P_VA_GPIO + 0x4A0) +#define S5PV210_MP18_BASE (S5P_VA_GPIO + 0x4C0) +#define S5PV210_MP20_BASE (S5P_VA_GPIO + 0x4E0) +#define S5PV210_MP21_BASE (S5P_VA_GPIO + 0x500) +#define S5PV210_MP22_BASE (S5P_VA_GPIO + 0x520)
arch/arm/mach-s5pv210/include/mach/regs-gpio.h line 75
Quoted 10 lines
arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file +10
-0+#define S5PV210_MP23_BASE (S5P_VA_GPIO + 0x540) +#define S5PV210_MP24_BASE (S5P_VA_GPIO + 0x560) +#define S5PV210_MP25_BASE (S5P_VA_GPIO + 0x580) +#define S5PV210_MP26_BASE (S5P_VA_GPIO + 0x5A0) +#define S5PV210_MP27_BASE (S5P_VA_GPIO + 0x5C0) +#define S5PV210_MP28_BASE (S5P_VA_GPIO + 0x5E0) +#define S5PV210_ETC0_BASE (S5P_VA_GPIO + 0x600) +#define S5PV210_ETC1_BASE (S5P_VA_GPIO + 0x620) +#define S5PV210_ETC2_BASE (S5P_VA_GPIO + 0x640) +#define S5PV210_ETC4_BASE (S5P_VA_GPIO + 0x660)
wasn't there somethign similar to this with the gpio interrupts.
Signature · 4 lines
Ben Q: What's a light-year? A: One-third less calories than a regular year.
ARM11; S3C6410 USB-OTG-Host driver soruce-code
Hello,
I would like to look for USB-OTG-Host Linux driver for S3C6410. Please let me know your idea.