Skip to contentSkip to conversation

ARM: S5PV210: Add S5PV210 GPIO support.

PATCH Superseded Kukjin Kim 3 participants 4 messages May 12, 2010 – May 13, 2010

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Kukjin Kim

author
#0 lore raw

PATCH v2 1/1 ARM: S5PV210: Add S5PV210 GPIO support.

From: Pannaga Bhushan <[email protected]>

This patch adds GPIOlib support for S5PV210.

---
 arch/arm/mach-s5pv210/Makefile            |    2 +-
 arch/arm/mach-s5pv210/gpio.c              |  259 +++++++++++++++++++++++++++++
 arch/arm/mach-s5pv210/include/mach/gpio.h |   18 ++-
 3 files changed, 275 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-s5pv210/gpio.c
arch/arm/mach-s5pv210/Makefile +1 -1
index 8ebf51c..cb1553c 100644
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5PV210 system
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o gpio.o
 
 # machine support
 
arch/arm/mach-s5pv210/gpio.c new file +259 -0

259 lines not on this page · raw message

arch/arm/mach-s5pv210/include/mach/gpio.h +15 -3
index 533b020..4dd417c 100644
@@ -18,6 +18,8 @@
 #define gpio_cansleep	__gpio_cansleep
 #define gpio_to_irq	__gpio_to_irq
 
+/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+
 /* GPIO bank sizes */
 #define S5PV210_GPIO_A0_NR	(8)
 #define S5PV210_GPIO_A1_NR	(4)
@@ -47,6 +49,10 @@
 #define S5PV210_GPIO_J3_NR	(8)
 #define S5PV210_GPIO_J4_NR	(5)
 
+#define S5PV210_GPIO_MP01_NR	(8)
+#define S5PV210_GPIO_MP02_NR	(4)
+#define S5PV210_GPIO_MP03_NR	(8)
+
 /* GPIO bank numbers */
 
 /* CONFIG_S3C_GPIO_SPACE allows the user to select extra
@@ -85,6 +91,9 @@ enum s5p_gpio_number {
 	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
 	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
 	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
+	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
+	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
 };
 
 /* S5PV210 GPIO number definitions */
@@ -115,13 +124,16 @@ enum s5p_gpio_number {
 #define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
 #define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
 #define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
+#define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
+#define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
+#define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
 
 /* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
 #define S3C_GPIO_END		S5PV210_GPIO_END
 
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS		(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) +	\
+/* define the number of gpios we need to the one after the MP03() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
 #include <asm-generic/gpio.h>
Signature · 1 line
1.6.2.5
#1 lore raw

PATCH v2 1/1 ARM: S5PV210: Add S5PV210 GPIO support.

arch/arm/mach-s5pv210/gpio.c line 17

Quoted 5 lines · Kukjin Kim
arch/arm/mach-s5pv210/gpio.c new file +5 -0
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>

It's linux/gpio.h

author
#2 lore raw

PATCH v2 1/1 ARM: S5PV210: Add S5PV210 GPIO support.

Quoted 9 lines · Russell King

arch/arm/mach-s5pv210/gpio.c line 17

Quoted 5 lines · Kukjin Kim
arch/arm/mach-s5pv210/gpio.c new file +5 -0
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>

It's linux/gpio.h

Oh ok, I will fix it.

Thanks for your comment.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.

#3 lore raw

PATCH v2 1/1 ARM: S5PV210: Add S5PV210 GPIO support.

In reply to Kukjin Kim
Quoted 59 lines · Kukjin Kim

From: Pannaga Bhushan <[email protected]>

This patch adds GPIOlib support for S5PV210.

---
 arch/arm/mach-s5pv210/Makefile            |    2 +-
 arch/arm/mach-s5pv210/gpio.c              |  259 +++++++++++++++++++++++++++++
 arch/arm/mach-s5pv210/include/mach/gpio.h |   18 ++-
 3 files changed, 275 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-s5pv210/gpio.c
arch/arm/mach-s5pv210/Makefile +1 -1
index 8ebf51c..cb1553c 100644
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5PV210 system
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o gpio.o
 
 # machine support
 
arch/arm/mach-s5pv210/gpio.c new file +27 -0
new file mode 100644
index 0000000..8196bd2
@@ -0,0 +1,259 @@
+/* linux/arch/arm/mach-s5pv210/gpio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};