Skip to contentSkip to conversation

pxa/colibri270: Add TSC support

PATCH New Marek Vasut 2 participants 5 messages May 12, 2010 – May 13, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 pxa/colibri270: Add TSC support

---
 arch/arm/mach-pxa/colibri-pxa270.c       |   42 ++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |    1 +
 2 files changed, 43 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/colibri-pxa270.c +42 -0
index 1cbeb61..6e0d623 100644
@@ -22,6 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
+#include <linux/ucb1400.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -31,6 +32,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <mach/audio.h>
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
@@ -66,6 +68,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 	GPIO119_USBH2_PWR,
 	GPIO120_USBH2_PEN,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
 };
 
 /******************************************************************************
@@ -205,6 +216,36 @@ static void __init colibri_pxa270_uhc_init(void)
 static inline void colibri_pxa270_uhc_init(void) {}
 #endif
 
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
+};
+
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
@@ -216,6 +257,7 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_eth_init();
 	colibri_pxa270_mmc_init();
 	colibri_pxa270_uhc_init();
+	colibri_pxa270_tsc_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
arch/arm/mach-pxa/include/mach/colibri.h +1 -0
index 08bee63..3471181 100644
@@ -35,6 +35,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* GPIO definitions for Colibri PXA270 */
 #define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
 #define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 #endif /* _COLIBRI_H_ */
 
Signature · 1 line
1.7.0
#1 lore raw

PATCH 2/2 pxa/income: Add Income SBC support

This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak.

---
 MAINTAINERS                             |    7 +
 arch/arm/mach-pxa/Kconfig               |    6 +
 arch/arm/mach-pxa/Makefile              |    1 +
 arch/arm/mach-pxa/include/mach/income.h |   25 ++
 arch/arm/mach-pxa/income.c              |  427 +++++++++++++++++++++++++++++++
 5 files changed, 466 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/income.h
 create mode 100644 arch/arm/mach-pxa/income.c
MAINTAINERS +7 -0
index bed6757..684e337 100644
@@ -696,6 +696,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/INCOME PXA270 SUPPORT
+M:	Marek Vasut <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/income.c
+F:	arch/arm/mach-pxa/include/mach-pxa/income.h
+
 ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <[email protected]>
 M:	Dan Williams <[email protected]>
arch/arm/mach-pxa/Kconfig +6 -0
index ded9d64..5ab648b 100644
@@ -274,6 +274,12 @@ config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
 	select CPU_PXA26x
 
+config MACH_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
arch/arm/mach-pxa/Makefile +1 -0
index b8f1f4b..52d5c4c 100644
@@ -94,6 +94,7 @@ obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
+obj-$(CONFIG_MACH_INCOME)	+= income.o
 
 # Support for blinky lights
 led-y := leds.o
arch/arm/mach-pxa/include/mach/income.h new file +25 -0
new file mode 100644
index 0000000..5c8d677
@@ -0,0 +1,25 @@
+/*
+ * GPIOs and interrupts for Income s.r.o. PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_INCOME_H_
+#define _INCLUDE_INCOME_H_
+
+/* GPIO definitions for Income s.r.o. PXA270 SBC */
+#define GPIO114_INCOME_ETH_IRQ	114
+#define GPIO0_INCOME_SD_DETECT	0
+#define GPIO0_INCOME_SD_RO	1
+#define GPIO54_INCOME_LED_A	54
+#define GPIO55_INCOME_LED_B	55
+#define GPIO113_INCOME_TS_IRQ	113
+
+#endif /* _INCLUDE_INCOME_H_ */
+
arch/arm/mach-pxa/income.c new file +427 -0

427 lines not on this page · raw message

Signature · 1 line
1.7.0
#2 lore raw

PATCH 2/2 pxa/income: Add Income SBC support

Quoted 2 lines · Marek Vasut

This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak.

Hmm, so this is exactly what a module/board split would make sense for now, as this patch duplicates tons of lines from one file to another.

Marek, what do you think - is it worth giving that approach a try?

Daniel

Quoted 526 lines
---
 MAINTAINERS                             |    7 +
 arch/arm/mach-pxa/Kconfig               |    6 +
 arch/arm/mach-pxa/Makefile              |    1 +
 arch/arm/mach-pxa/include/mach/income.h |   25 ++
 arch/arm/mach-pxa/income.c              |  427 +++++++++++++++++++++++++++++++
 5 files changed, 466 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/income.h
 create mode 100644 arch/arm/mach-pxa/income.c
MAINTAINERS +7 -0
index bed6757..684e337 100644
@@ -696,6 +696,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/INCOME PXA270 SUPPORT
+M:	Marek Vasut <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/income.c
+F:	arch/arm/mach-pxa/include/mach-pxa/income.h
+
 ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <[email protected]>
 M:	Dan Williams <[email protected]>
arch/arm/mach-pxa/Kconfig +6 -0
index ded9d64..5ab648b 100644
@@ -274,6 +274,12 @@ config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
 	select CPU_PXA26x
 
+config MACH_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
arch/arm/mach-pxa/Makefile +1 -0
index b8f1f4b..52d5c4c 100644
@@ -94,6 +94,7 @@ obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
+obj-$(CONFIG_MACH_INCOME)	+= income.o
 
 # Support for blinky lights
 led-y := leds.o
arch/arm/mach-pxa/include/mach/income.h new file +25 -0
new file mode 100644
index 0000000..5c8d677
@@ -0,0 +1,25 @@
+/*
+ * GPIOs and interrupts for Income s.r.o. PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_INCOME_H_
+#define _INCLUDE_INCOME_H_
+
+/* GPIO definitions for Income s.r.o. PXA270 SBC */
+#define GPIO114_INCOME_ETH_IRQ	114
+#define GPIO0_INCOME_SD_DETECT	0
+#define GPIO0_INCOME_SD_RO	1
+#define GPIO54_INCOME_LED_A	54
+#define GPIO55_INCOME_LED_B	55
+#define GPIO113_INCOME_TS_IRQ	113
+
+#endif /* _INCLUDE_INCOME_H_ */
+
arch/arm/mach-pxa/income.c new file +427 -0
new file mode 100644
index 0000000..764ccc5
@@ -0,0 +1,427 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <[email protected]>
+ * Pavel Revak <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <mach/audio.h>
+#include <mach/hardware.h>
+#include <mach/income.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* Ethernet */
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition income_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00040000,
+		.size =		0x00080000,
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00080000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data income_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= income_partitions,
+		.nr_parts	= ARRAY_SIZE(income_partitions)
+	}
+};
+
+static struct resource income_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device income_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = income_flash_data,
+	},
+	.resource = &income_flash_resource,
+	.num_resources = 1,
+};
+
+static void __init income_nor_init(void)
+{
+	platform_device_register(&income_flash);
+}
+#else
+static inline void income_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource income_dm9000_resources[] = {
+	[0] = {
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= gpio_to_irq(GPIO114_INCOME_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_INCOME_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	},
+};
+
+static struct platform_device income_dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(income_dm9000_resources),
+	.resource	= income_dm9000_resources,
+};
+
+static void __init income_eth_init(void)
+{
+	platform_device_register(&income_dm9000_device);
+}
+#else
+static inline void income_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t income_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata income_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_INCOME_TS_IRQ),
+};
+
+static struct platform_device income_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &income_ucb1400_pdata,
+	},
+};
+
+static void __init income_tsc_init(void)
+{
+	pxa_set_ac97_info(&income_ac97_pdata);
+	platform_device_register(&income_ucb1400_device);
+}
+#else
+static inline void income_tsc_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+static void __init income_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_nor_init();
+	income_eth_init();
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_tsc_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
Signature · 1 line
1.7.0
#3 lore raw

PATCH 2/2 pxa/income: Add Income SBC support

Dne St 12. kv?tna 2010 09:34:20 Daniel Mack napsal(a):

Quoted 8 lines · Marek Vasut
Quoted 2 lines

This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak.

Hmm, so this is exactly what a module/board split would make sense for now, as this patch duplicates tons of lines from one file to another.

Marek, what do you think - is it worth giving that approach a try?

I replied from the cellphone,but it probably didn't arrive. Anyway, I'm all for it. Should be do it after or before this goes in ?

Quoted 494 lines

Daniel

Quoted 491 lines

---

 MAINTAINERS                             |    7 +
 arch/arm/mach-pxa/Kconfig               |    6 +
 arch/arm/mach-pxa/Makefile              |    1 +
 arch/arm/mach-pxa/include/mach/income.h |   25 ++
 arch/arm/mach-pxa/income.c              |  427
 +++++++++++++++++++++++++++++++ 5 files changed, 466 insertions(+), 0
 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/income.h
 create mode 100644 arch/arm/mach-pxa/income.c
MAINTAINERS +0 -0
index bed6757..684e337 100644
@@ -696,6 +696,13 @@ T:	git

git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git

F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h

MAINTAINERS +7 -0
+ARM/INCOME PXA270 SUPPORT
+M:	Marek Vasut <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/income.c
+F:	arch/arm/mach-pxa/include/mach-pxa/income.h
+
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <[email protected]>
 M:	Dan Williams <[email protected]>
arch/arm/mach-pxa/Kconfig +6 -0
index ded9d64..5ab648b 100644
@@ -274,6 +274,12 @@ config MACH_HIMALAYA
 
 	bool "HTC Himalaya Support"
 	select CPU_PXA26x
 
+config MACH_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 
 config MACH_MAGICIAN
arch/arm/mach-pxa/Kconfig +0 -0
 	bool "Enable HTC Magician Support"
 	select PXA27x
arch/arm/mach-pxa/Makefile +1 -0
index b8f1f4b..52d5c4c 100644
@@ -94,6 +94,7 @@ obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
+obj-$(CONFIG_MACH_INCOME)	+= income.o
 

# Support for blinky lights
led-y := leds.o

(quoted diff) +0 -0

b/arch/arm/mach-pxa/include/mach/income.h new file mode 100644 index 0000000..5c8d677

arch/arm/mach-pxa/include/mach/income.h new file +25 -0
@@ -0,0 +1,25 @@
+/*
+ * GPIOs and interrupts for Income s.r.o. PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_INCOME_H_
+#define _INCLUDE_INCOME_H_
+
+/* GPIO definitions for Income s.r.o. PXA270 SBC */
+#define GPIO114_INCOME_ETH_IRQ	114
+#define GPIO0_INCOME_SD_DETECT	0
+#define GPIO0_INCOME_SD_RO	1
+#define GPIO54_INCOME_LED_A	54
+#define GPIO55_INCOME_LED_B	55
+#define GPIO113_INCOME_TS_IRQ	113
+
+#endif /* _INCLUDE_INCOME_H_ */
+
arch/arm/mach-pxa/income.c new file +51 -0
new file mode 100644
index 0000000..764ccc5
@@ -0,0 +1,427 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <[email protected]>
+ * Pavel Revak <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <mach/audio.h>
+#include <mach/hardware.h>
+#include <mach/income.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/***********************************************************************

******* + * Pin configuration
+
************************************************************************
******/ +static mfp_cfg_t income_pin_config[] __initdata = {

arch/arm/mach-pxa/income.c new file +56 -0
+	/* Ethernet */
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
+};
+
+/***********************************************************************

******* + * NOR Flash
+
************************************************************************
******/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition income_partitions[] = {

arch/arm/mach-pxa/income.c new file +56 -0
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00040000,
+		.size =		0x00080000,
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00080000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data income_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= income_partitions,
+		.nr_parts	= ARRAY_SIZE(income_partitions)
+	}
+};
+
+static struct resource income_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device income_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = income_flash_data,
+	},
+	.resource = &income_flash_resource,
+	.num_resources = 1,
+};
+
+static void __init income_nor_init(void)
+{
+	platform_device_register(&income_flash);
+}
+#else
+static inline void income_nor_init(void) {}
+#endif
+
+/***********************************************************************

******* + * Ethernet
+
************************************************************************
******/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)

arch/arm/mach-pxa/income.c new file +34 -0
+static struct resource income_dm9000_resources[] = {
+	[0] = {
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= gpio_to_irq(GPIO114_INCOME_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_INCOME_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	},
+};
+
+static struct platform_device income_dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(income_dm9000_resources),
+	.resource	= income_dm9000_resources,
+};
+
+static void __init income_eth_init(void)
+{
+	platform_device_register(&income_dm9000_device);
+}
+#else
+static inline void income_eth_init(void) {}
+#endif
+
+/***********************************************************************

******* + * SD/MMC card controller
+
************************************************************************
******/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)

arch/arm/mach-pxa/income.c new file +17 -0
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/***********************************************************************

******* + * USB Host
+
************************************************************************
******/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data income_ohci_info = {

arch/arm/mach-pxa/income.c new file +13 -0
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/***********************************************************************

******* + * LED
+
************************************************************************
******/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led income_gpio_leds[] = {

arch/arm/mach-pxa/income.c new file +36 -0
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/***********************************************************************

******* + * Audio and Touchscreen
+
************************************************************************
******/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \

arch/arm/mach-pxa/income.c new file +27 -0
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t income_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata income_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_INCOME_TS_IRQ),
+};
+
+static struct platform_device income_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &income_ucb1400_pdata,
+	},
+};
+
+static void __init income_tsc_init(void)
+{
+	pxa_set_ac97_info(&income_ac97_pdata);
+	platform_device_register(&income_ucb1400_device);
+}
+#else
+static inline void income_tsc_init(void) {}
+#endif
+
+/***********************************************************************

******* + * I2C
+
************************************************************************
******/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)

arch/arm/mach-pxa/income.c new file +19 -0
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/***********************************************************************

******* + * Framebuffer
+
************************************************************************
******/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)

arch/arm/mach-pxa/income.c new file +33 -0
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
Quoted 8 lines
Quoted 8 lines
arch/arm/mach-pxa/income.c new file +2 -0
+
+/***********************************************************************

******* + * Backlight
+
************************************************************************
******/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) +static struct
platform_pwm_backlight_data income_backlight_data = { + .pwm_id

= 0,

Quoted 48 lines
Quoted 48 lines
arch/arm/mach-pxa/income.c new file +48 -0
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+static void __init income_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_nor_init();
+	income_eth_init();
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_tsc_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
#4 lore raw

PATCH 2/2 pxa/income: Add Income SBC support

Quoted 5 lines · Marek Vasut

Dne St 12. kv?tna 2010 09:34:20 Daniel Mack napsal(a):

Quoted 4 lines · Marek Vasut
Quoted 2 lines

This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak.

Quoted 7 lines
Quoted 4 lines

Hmm, so this is exactly what a module/board split would make sense for now, as this patch duplicates tons of lines from one file to another.

Marek, what do you think - is it worth giving that approach a try?

I replied from the cellphone,but it probably didn't arrive. Anyway, I'm all for it. Should be do it after or before this goes in ?

I would rather not commit the support as it is right now, mainly because with the new aproach of separated module and board code, there will be need for another boot parameter. Things get too confusing if they're changed too often.

The split should be easy though.

Daniel