ARM: S5PV210: Add S5PV210 GPIO support.
Subsystems (3)
PATCH v3 1/2 ARM: S5PV210: Add S5PV210 GPIO support.
From: Pannaga Bhushan <[email protected]>
Adds GPIOlib support for S5PV210.
Signed-off-by Pannaga Bhushan <[email protected]>
Signed-off-by Kukjin Kim <[email protected]>
--- arch/arm/mach-s5pv210/Makefile | 2 +- arch/arm/mach-s5pv210/gpiolib.c | 257 +++++++++++++++++++++++++++++ arch/arm/mach-s5pv210/include/mach/gpio.h | 18 ++- 3 files changed, 273 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-s5pv210/gpiolib.c
arch/arm/mach-s5pv210/Makefile +1 -1
@@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpiolib.o # machine support
arch/arm/mach-s5pv210/gpiolib.c new file +257 -0
257 lines not on this page · raw message
arch/arm/mach-s5pv210/include/mach/gpio.h +15 -3
@@ -18,6 +18,8 @@#define gpio_cansleep __gpio_cansleep#define gpio_to_irq __gpio_to_irq +/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8)#define S5PV210_GPIO_A1_NR (4)
@@ -47,6 +49,10 @@#define S5PV210_GPIO_J3_NR (8)#define S5PV210_GPIO_J4_NR (5) +#define S5PV210_GPIO_MP01_NR (8) +#define S5PV210_GPIO_MP02_NR (4) +#define S5PV210_GPIO_MP03_NR (8) +/* GPIO bank numbers */ /* CONFIG_S3C_GPIO_SPACE allows the user to select extra
@@ -85,6 +91,9 @@ enum s5p_gpio_number {S5PV210_GPIO_J2_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J1 ),S5PV210_GPIO_J3_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J2 ),S5PV210_GPIO_J4_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J3 ), +S5PV210_GPIO_MP01_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J4 ), +S5PV210_GPIO_MP02_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP01 ), + S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), };/* S5PV210 GPIO number definitions */
@@ -115,13 +124,16 @@ enum s5p_gpio_number {#define S5PV210_GPJ2 (_nr) (S5PV210_GPIO_J2_START + (_nr))#define S5PV210_GPJ3 (_nr) (S5PV210_GPIO_J3_START + (_nr))#define S5PV210_GPJ4 (_nr) (S5PV210_GPIO_J4_START + (_nr)) +#define S5PV210_MP01 (_nr) (S5PV210_GPIO_MP01_START + (_nr)) +#define S5PV210_MP02 (_nr) (S5PV210_GPIO_MP02_START + (_nr)) +#define S5PV210_MP03 (_nr) (S5PV210_GPIO_MP03_START + (_nr))/* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)#define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ +/* define the number of gpios we need to the one after the MP03() range */ +#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1)#include <asm-generic/gpio.h>
Signature · 1 line
1.6.2.5
PATCH v3 1/2 ARM: S5PV210: Add S5PV210 GPIO support.
Quoted 6 lines · Kukjin Kim
From: Pannaga Bhushan <[email protected]>
Adds GPIOlib support for S5PV210.
Signed-off-by Pannaga Bhushan <[email protected]>Signed-off-by Kukjin Kim <[email protected]>
ok, applied to for-2635/s5p-general
Quoted 344 lines
--- arch/arm/mach-s5pv210/Makefile | 2 +- arch/arm/mach-s5pv210/gpiolib.c | 257 +++++++++++++++++++++++++++++ arch/arm/mach-s5pv210/include/mach/gpio.h | 18 ++- 3 files changed, 273 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-s5pv210/gpiolib.carch/arm/mach-s5pv210/Makefile +1
-1@@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpiolib.o # machine supportarch/arm/mach-s5pv210/gpiolib.c new file +257
-0@@ -0,0 +1,257 @@ +/* linux/arch/arm/mach-s5pv210/gpiolib.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* S5PV210 - GPIOlib support +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <mach/map.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* GPIO bank's base address given the index of the bank in the +* list of all gpio banks. +*/ +#define S5PV210_BANK_BASE (bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* +* Following are the gpio banks in v210. +* +* The 'config' member when left to NULL, is initialized to the default +* structure gpio_cfg in the init function below. +* +* The 'base' member is also initialized in the init function below. +* Note: The initialization of 'base' member of s3c_gpio_chip structure +* uses the above macro and depends on the banks being listed in order here. +*/ +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + { + .chip = { + .base =S5PV210_GPA0 (0 ), + .ngpio =S5PV210_GPIO_A0_NR , + .label ="GPA0" , + }, + }, { + .chip = { + .base =S5PV210_GPA1 (0 ), + .ngpio =S5PV210_GPIO_A1_NR , + .label ="GPA1" , + }, + }, { + .chip = { + .base =S5PV210_GPB (0 ), + .ngpio =S5PV210_GPIO_B_NR , + .label ="GPB" , + }, + }, { + .chip = { + .base =S5PV210_GPC0 (0 ), + .ngpio =S5PV210_GPIO_C0_NR , + .label ="GPC0" , + }, + }, { + .chip = { + .base =S5PV210_GPC1 (0 ), + .ngpio =S5PV210_GPIO_C1_NR , + .label ="GPC1" , + }, + }, { + .chip = { + .base =S5PV210_GPD0 (0 ), + .ngpio =S5PV210_GPIO_D0_NR , + .label ="GPD0" , + }, + }, { + .chip = { + .base =S5PV210_GPD1 (0 ), + .ngpio =S5PV210_GPIO_D1_NR , + .label ="GPD1" , + }, + }, { + .chip = { + .base =S5PV210_GPE0 (0 ), + .ngpio =S5PV210_GPIO_E0_NR , + .label ="GPE0" , + }, + }, { + .chip = { + .base =S5PV210_GPE1 (0 ), + .ngpio =S5PV210_GPIO_E1_NR , + .label ="GPE1" , + }, + }, { + .chip = { + .base =S5PV210_GPF0 (0 ), + .ngpio =S5PV210_GPIO_F0_NR , + .label ="GPF0" , + }, + }, { + .chip = { + .base =S5PV210_GPF1 (0 ), + .ngpio =S5PV210_GPIO_F1_NR , + .label ="GPF1" , + }, + }, { + .chip = { + .base =S5PV210_GPF2 (0 ), + .ngpio =S5PV210_GPIO_F2_NR , + .label ="GPF2" , + }, + }, { + .chip = { + .base =S5PV210_GPF3 (0 ), + .ngpio =S5PV210_GPIO_F3_NR , + .label ="GPF3" , + }, + }, { + .chip = { + .base =S5PV210_GPG0 (0 ), + .ngpio =S5PV210_GPIO_G0_NR , + .label ="GPG0" , + }, + }, { + .chip = { + .base =S5PV210_GPG1 (0 ), + .ngpio =S5PV210_GPIO_G1_NR , + .label ="GPG1" , + }, + }, { + .chip = { + .base =S5PV210_GPG2 (0 ), + .ngpio =S5PV210_GPIO_G2_NR , + .label ="GPG2" , + }, + }, { + .chip = { + .base =S5PV210_GPG3 (0 ), + .ngpio =S5PV210_GPIO_G3_NR , + .label ="GPG3" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_GPH0 (0 ), + .ngpio =S5PV210_GPIO_H0_NR , + .label ="GPH0" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_GPH1 (0 ), + .ngpio =S5PV210_GPIO_H1_NR , + .label ="GPH1" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_GPH2 (0 ), + .ngpio =S5PV210_GPIO_H2_NR , + .label ="GPH2" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_GPH3 (0 ), + .ngpio =S5PV210_GPIO_H3_NR , + .label ="GPH3" , + }, + }, { + .chip = { + .base =S5PV210_GPI (0 ), + .ngpio =S5PV210_GPIO_I_NR , + .label ="GPI" , + }, + }, { + .chip = { + .base =S5PV210_GPJ0 (0 ), + .ngpio =S5PV210_GPIO_J0_NR , + .label ="GPJ0" , + }, + }, { + .chip = { + .base =S5PV210_GPJ1 (0 ), + .ngpio =S5PV210_GPIO_J1_NR , + .label ="GPJ1" , + }, + }, { + .chip = { + .base =S5PV210_GPJ2 (0 ), + .ngpio =S5PV210_GPIO_J2_NR , + .label ="GPJ2" , + }, + }, { + .chip = { + .base =S5PV210_GPJ3 (0 ), + .ngpio =S5PV210_GPIO_J3_NR , + .label ="GPJ3" , + }, + }, { + .chip = { + .base =S5PV210_GPJ4 (0 ), + .ngpio =S5PV210_GPIO_J4_NR , + .label ="GPJ4" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_MP01 (0 ), + .ngpio =S5PV210_GPIO_MP01_NR , + .label ="MP01" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_MP02 (0 ), + .ngpio =S5PV210_GPIO_MP02_NR , + .label ="MP02" , + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base =S5PV210_MP03 (0 ), + .ngpio =S5PV210_GPIO_MP03_NR , + .label ="MP03" , + }, + }, +}; + +static __init int s5pv210_gpiolib_init (void ) +{ +struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; +int nr_chips =ARRAY_SIZE (s5pv210_gpio_4bit); +int i =0 ; + +for (i =0 ; i < nr_chips; i++, chip++) { +if (chip->config ==NULL ) + chip->config = &gpio_cfg; +if (chip->base ==NULL ) + chip->base =S5PV210_BANK_BASE (i); + } + +samsung_gpiolib_add_4bit_chips (s5pv210_gpio_4bit, nr_chips); + +return 0 ; +} +core_initcall (s5pv210_gpiolib_init);arch/arm/mach-s5pv210/include/mach/gpio.h +15
-3@@ -18,6 +18,8 @@#define gpio_cansleep __gpio_cansleep#define gpio_to_irq __gpio_to_irq +/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8)#define S5PV210_GPIO_A1_NR (4)@@ -47,6 +49,10 @@#define S5PV210_GPIO_J3_NR (8)#define S5PV210_GPIO_J4_NR (5) +#define S5PV210_GPIO_MP01_NR (8) +#define S5PV210_GPIO_MP02_NR (4) +#define S5PV210_GPIO_MP03_NR (8) +/* GPIO bank numbers */ /* CONFIG_S3C_GPIO_SPACE allows the user to select extra @@ -85,6 +91,9 @@ enum s5p_gpio_number {S5PV210_GPIO_J2_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J1 ),S5PV210_GPIO_J3_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J2 ),S5PV210_GPIO_J4_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J3 ), +S5PV210_GPIO_MP01_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_J4 ), +S5PV210_GPIO_MP02_START =S5PV210_GPIO_NEXT (S5PV210_GPIO_MP01 ), + S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), };/* S5PV210 GPIO number definitions */ @@ -115,13 +124,16 @@ enum s5p_gpio_number {#define S5PV210_GPJ2 (_nr) (S5PV210_GPIO_J2_START + (_nr))#define S5PV210_GPJ3 (_nr) (S5PV210_GPIO_J3_START + (_nr))#define S5PV210_GPJ4 (_nr) (S5PV210_GPIO_J4_START + (_nr)) +#define S5PV210_MP01 (_nr) (S5PV210_GPIO_MP01_START + (_nr)) +#define S5PV210_MP02 (_nr) (S5PV210_GPIO_MP02_START + (_nr)) +#define S5PV210_MP03 (_nr) (S5PV210_GPIO_MP03_START + (_nr))/* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)#define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ +/* define the number of gpios we need to the one after the MP03() range */ +#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1)#include <asm-generic/gpio.h> Signature · 6 lines
1.6.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.