bridge: patches for net-next
Subsystems (5)
cover bridge: patches for net-next
These are only partially related patches for 2.6.35. They supersede earlier (unaccepted) patches in net-next.
PATCH 1/4 bridge: netpoll cleanup
Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed.
net/bridge/br_device.c +26 -6
@@ -191,7 +191,7 @@ static int br_set_tx_csum(struct net_dev }#ifdef CONFIG_NET_POLL_CONTROLLER -bool br_devices_support_netpoll (struct net_bridge *br) +static bool br_devices_support_netpoll (struct net_bridge *br) {struct net_bridge_port *p;bool ret = true;
@@ -217,9 +217,9 @@ static void br_poll_controller(struct nenetpoll_poll_dev (np->real_dev); } -void br_netpoll_cleanup (struct net_device *br_dev) +void br_netpoll_cleanup (struct net_device *dev) { -struct net_bridge *br =netdev_priv (br_dev); +struct net_bridge *br =netdev_priv (dev);struct net_bridge_port *p, *n;const struct net_device_ops *ops;
@@ -235,10 +235,30 @@ void br_netpoll_cleanup(struct net_devic } } -#else - -void br_netpoll_cleanup (struct net_device *br_dev) +void br_netpoll_disable (struct net_bridge *br, +struct net_device *dev) { +if (br_devices_support_netpoll (br)) + br->dev->priv_flags &= ~IFF_DISABLE_NETPOLL ; +if (dev->netdev_ops->ndo_netpoll_cleanup) + dev->netdev_ops->ndo_netpoll_cleanup (dev); +else + dev->npinfo =NULL ; +} + +void br_netpoll_enable (struct net_bridge *br, +struct net_device *dev) +{ +if (br_devices_support_netpoll (br)) { + br->dev->priv_flags &= ~IFF_DISABLE_NETPOLL ; +if (br->dev->npinfo) + dev->npinfo = br->dev->npinfo; + }else if (!(br->dev->priv_flags &IFF_DISABLE_NETPOLL )) { + br->dev->priv_flags |=IFF_DISABLE_NETPOLL ; +printk (KERN_INFO "%s:new device %s" +" does not support netpoll (disabling)" , + br->dev->name, dev->name); + } }#endif
net/bridge/br_if.c +2 -21
@@ -154,14 +154,7 @@ static void del_nbp(struct net_bridge_pokobject_uevent (&p->kobj,KOBJ_REMOVE );kobject_del (&p->kobj); -#ifdef CONFIG_NET_POLL_CONTROLLER -if (br_devices_support_netpoll (br)) - br->dev->priv_flags &= ~IFF_DISABLE_NETPOLL ; -if (dev->netdev_ops->ndo_netpoll_cleanup) - dev->netdev_ops->ndo_netpoll_cleanup (dev); -else - dev->npinfo =NULL ; -#endif +br_netpoll_disable (br, dev);call_rcu (&p->rcu, destroy_nbp_rcu); }
@@ -455,19 +448,7 @@ int br_add_if(struct net_bridge *br, strkobject_uevent (&p->kobj,KOBJ_ADD ); -#ifdef CONFIG_NET_POLL_CONTROLLER -if (br_devices_support_netpoll (br)) { - br->dev->priv_flags &= ~IFF_DISABLE_NETPOLL ; -if (br->dev->npinfo) - dev->npinfo = br->dev->npinfo; - }else if (!(br->dev->priv_flags &IFF_DISABLE_NETPOLL )) { - br->dev->priv_flags |=IFF_DISABLE_NETPOLL ; -printk (KERN_INFO "New device %s does not support netpoll\n" , - dev->name); -printk (KERN_INFO "Disabling netpoll for %s\n" , - br->dev->name); - } -#endif +br_netpoll_enable (br, dev);return 0 ; err2:
net/bridge/br_private.h +12 -2
@@ -253,8 +253,18 @@ static inline int br_is_root_bridge(consextern void br_dev_setup (struct net_device *dev);extern netdev_tx_t br_dev_xmit (struct sk_buff *skb,struct net_device *dev); -extern bool br_devices_support_netpoll (struct net_bridge *br); -extern void br_netpoll_cleanup (struct net_device *br_dev); +#ifdef CONFIG_NET_POLL_CONTROLLER +extern void br_netpoll_cleanup (struct net_device *dev); +extern void br_netpoll_enable (struct net_bridge *br, +struct net_device *dev); +extern void br_netpoll_disable (struct net_bridge *br, +struct net_device *dev); +#else +#define br_netpoll_cleanup (br) +#define br_netpoll_enable (br, dev) +#define br_netpoll_disable (br, dev) + +#endif /* br_fdb.c */ extern int br_fdb_init (void );
Re: [PATCH 1/4] bridge: netpoll cleanup
From: Stephen Hemminger <[email protected]>
Date: Mon, 10 May 2010 12:31:08 -0700
Quoted 5 lines
Move code around so that the ifdef for
NETPOLL_CONTROLLERdon't have to show up in main code path. The control functions should be in helpers that are only compiled if needed.Signed-off-by Stephen Hemminger <[email protected]>
Applied.
PATCH 2/4 bridge: change console message interface
In reply to Stephen HemmingerUse one set of macro's for all bridge messages.
Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent.
--- net/bridge/br.c | 2 +- net/bridge/br_fdb.c | 9 ++++----- net/bridge/br_ioctl.c | 2 +- net/bridge/br_multicast.c | 32 +++++++++++++------------------- net/bridge/br_netlink.c | 8 +++++--- net/bridge/br_private.h | 15 +++++++++++++++ net/bridge/br_stp.c | 11 +++++------ net/bridge/br_stp_if.c | 16 ++++++---------- net/bridge/br_stp_timer.c | 24 ++++++++++-------------- 9 files changed, 60 insertions(+), 59 deletions(-)
net/bridge/br.c +1 -1
@@ -38,7 +38,7 @@ static int __init br_init(void) err =stp_proto_register (&br_stp_proto);if (err <0 ) { -printk (KERN_ERR "bridge: can't register sap for STP\n" ); +pr_err ("bridge: can't register sap for STP\n" );return err; }
net/bridge/br_fdb.c +4 -5
@@ -353,8 +353,7 @@ static int fdb_insert(struct net_bridge*/ if (fdb->is_local)return 0 ; - -printk (KERN_WARNING "%s adding interface with same address " +br_warn (br,"adding interface %s with same address " "as a received packet\n" , source->dev->name);fdb_delete (fdb);
@@ -397,9 +396,9 @@ void br_fdb_update(struct net_bridge *br/* attempt to update an entry for a local interface */ if (unlikely (fdb->is_local)) {if (net_ratelimit ()) -printk (KERN_WARNING "%s: received packet with " -"own address as source address\n" , - source->dev->name); +br_warn (br,"received packet on %s with " +"own address as source address\n" , + source->dev->name); }else {/* fastpath: update of existing entry */ fdb->dst = source;
net/bridge/br_multicast.c +13 -19
@@ -585,10 +585,9 @@ static struct net_bridge_mdb_entry *br_mif (unlikely (count > br->hash_elasticity && count)) {if (net_ratelimit ()) -printk (KERN_INFO "%s: Multicast hash table " -"chain limit reached: %s\n" , - br->dev->name, port ? port->dev->name : - br->dev->name); +br_info (br,"Multicast hash table " +"chain limit reached: %s\n" , + port ? port->dev->name : br->dev->name); elasticity = br->hash_elasticity; }
@@ -596,11 +595,9 @@ static struct net_bridge_mdb_entry *br_mif (mdb->size >= max) { max *=2 ;if (unlikely (max >= br->hash_max)) { -printk (KERN_WARNING "%s: Multicast hash table maximum " -"reached, disabling snooping: %s, %d\n" , - br->dev->name, port ? port->dev->name : - br->dev->name, - max); +br_warn (br,"Multicast hash table maximum " +"reached, disabling snooping: %s, %d\n" , + port ? port->dev->name : br->dev->name, max); err = -E2BIG ; disable: br->multicast_disabled =1 ;
@@ -611,22 +608,19 @@ disable:if (max > mdb->max || elasticity) {if (mdb->old) {if (net_ratelimit ()) -printk (KERN_INFO "%s: Multicast hash table " -"on fire: %s\n" , - br->dev->name, port ? port->dev->name : - br->dev->name); +br_info (br,"Multicast hash table " +"on fire: %s\n" , + port ? port->dev->name : br->dev->name); err = -EEXIST ; goto err; } err =br_mdb_rehash (&br->mdb, max, elasticity);if (err) { -printk (KERN_WARNING "%s: Cannot rehash multicast " -"hash table, disabling snooping: " -"%s, %d, %d\n" , - br->dev->name, port ? port->dev->name : - br->dev->name, - mdb->size, err); +br_warn (br,"Cannot rehash multicast " +"hash table, disabling snooping: %s, %d, %d\n" , + port ? port->dev->name : br->dev->name, + mdb->size, err); goto disable; }
net/bridge/br_stp_if.c +6 -10
@@ -85,17 +85,16 @@ void br_stp_enable_port(struct net_bridg {br_init_port (p);br_port_state_selection (p->br); +br_log_state (p); }/* called under bridge lock */ void br_stp_disable_port (struct net_bridge_port *p) { -struct net_bridge *br; +struct net_bridge *br = p->br;int wasroot; - br = p->br; -printk (KERN_INFO "%s: port %i(%s) entering %s state\n" , - br->dev->name, p->port_no, p->dev->name,"disabled" ); +br_log_state (p); wasroot =br_is_root_bridge (br);br_become_designated_port (p);
@@ -127,11 +126,10 @@ static void br_stp_start(struct net_brid r =call_usermodehelper (BR_STP_PROG , argv, envp,UMH_WAIT_PROC );if (r ==0 ) { br->stp_enabled =BR_USER_STP ; -printk (KERN_INFO "%s: userspace STP started\n" , br->dev->name); +br_debug (br,"userspace STP started\n" ); }else { br->stp_enabled =BR_KERNEL_STP ; -printk (KERN_INFO "%s: starting userspace STP failed, " -"starting kernel STP\n" , br->dev->name); +br_debug (br,"using kernel STP\n" );/* To start timers on any ports left in blocking */ spin_lock_bh (&br->lock);
@@ -148,9 +146,7 @@ static void br_stp_stop(struct net_bridgif (br->stp_enabled ==BR_USER_STP ) { r =call_usermodehelper (BR_STP_PROG , argv, envp,1 ); -printk (KERN_INFO "%s: userspace STP stopped, return code %d\n" , - br->dev->name, r); - +br_info (br,"userspace STP stopped, return code %d\n" , r);/* To start timers on any ports left in blocking */ spin_lock_bh (&br->lock);
net/bridge/br_ioctl.c +1 -1
@@ -412,6 +412,6 @@ int br_dev_ioctl(struct net_device *dev, } -pr_debug ("Bridge does not support ioctl 0x%x\n" , cmd); +br_debug (br,"Bridge does not support ioctl 0x%x\n" , cmd);return -EOPNOTSUPP ; }
net/bridge/br_netlink.c +5 -3
@@ -42,8 +42,8 @@ static int br_fill_ifinfo(struct sk_buffstruct nlmsghdr *nlh;u8 operstate =netif_running (dev) ? dev->operstate :IF_OPER_DOWN ; -pr_debug ("br_fill_info event %d port %s master %s\n" , - event, dev->name, br->dev->name); +br_debug (br,"br_fill_info event %d port %s master %s\n" , + event, dev->name, br->dev->name); nlh =nlmsg_put (skb, pid, seq, event,sizeof (*hdr), flags);if (nlh ==NULL )
@@ -87,7 +87,9 @@ void br_ifinfo_notify(int event, structstruct sk_buff *skb;int err = -ENOBUFS ; -pr_debug ("bridge notify event=%d\n" , event); +br_debug (port->br,"port %u(%s) event %d\n" , + (unsigned )port->port_no, port->dev->name, event); + skb =nlmsg_new (br_nlmsg_size (),GFP_ATOMIC );if (skb ==NULL ) goto errout;
net/bridge/br_stp_timer.c +10 -14
@@ -35,7 +35,7 @@ static void br_hello_timer_expired(unsig {struct net_bridge *br = (struct net_bridge *)arg; -pr_debug ("%s: hello timer expired\n" , br->dev->name); +br_debug (br,"hello timer expired\n" );spin_lock (&br->lock);if (br->dev->flags &IFF_UP ) {br_config_bpdu_generation (br);
@@ -55,13 +55,9 @@ static void br_message_age_timer_expiredif (p->state ==BR_STATE_DISABLED )return ; - -pr_info ("%s: neighbor %.2x%.2x.%.2x:%.2x:%.2x:%.2x:%.2x:%.2x lost on port %d(%s)\n" , - br->dev->name, - id->prio[0 ], id->prio[1 ], - id->addr[0 ], id->addr[1 ], id->addr[2 ], - id->addr[3 ], id->addr[4 ], id->addr[5 ], - p->port_no, p->dev->name); +br_info (br,"port %u(%s) neighbor %.2x%.2x.%pM lost\n" , + (unsigned ) p->port_no, p->dev->name, + id->prio[0 ], id->prio[1 ], &id->addr);/* * According to the spec, the message age timer cannot be
@@ -87,8 +83,8 @@ static void br_forward_delay_timer_expirstruct net_bridge_port *p = (struct net_bridge_port *) arg;struct net_bridge *br = p->br; -pr_debug ("%s: %d(%s) forward delay timer\n" , - br->dev->name, p->port_no, p->dev->name); +br_debug (br,"port %u(%s) forward delay timer\n" , + (unsigned ) p->port_no, p->dev->name);spin_lock (&br->lock);if (p->state ==BR_STATE_LISTENING ) { p->state =BR_STATE_LEARNING ;
@@ -107,7 +103,7 @@ static void br_tcn_timer_expired(unsigne {struct net_bridge *br = (struct net_bridge *) arg; -pr_debug ("%s: tcn timer expired\n" , br->dev->name); +br_debug (br,"tcn timer expired\n" );spin_lock (&br->lock);if (br->dev->flags &IFF_UP ) {br_transmit_tcn (br);
@@ -121,7 +117,7 @@ static void br_topology_change_timer_exp {struct net_bridge *br = (struct net_bridge *) arg; -pr_debug ("%s: topo change timer expired\n" , br->dev->name); +br_debug (br,"topo change timer expired\n" );spin_lock (&br->lock); br->topology_change_detected =0 ; br->topology_change =0 ;
@@ -132,8 +128,8 @@ static void br_hold_timer_expired(unsign {struct net_bridge_port *p = (struct net_bridge_port *) arg; -pr_debug ("%s: %d(%s) hold timer expired\n" , - p->br->dev->name, p->port_no, p->dev->name); +br_debug (p->br,"port %u(%s) hold timer expired\n" , + (unsigned ) p->port_no, p->dev->name);spin_lock (&p->br->lock);if (p->config_pending)
net/bridge/br_stp.c +5 -6
@@ -31,10 +31,9 @@ static const char *const br_port_state_nvoid br_log_state (const struct net_bridge_port *p) { -pr_info ("%s: port %d(%s) entering %s state\n" , - p->br->dev->name, p->port_no, p->dev->name, +br_info (p->br,"port %u(%s) entering %s state\n" , + (unsigned ) p->port_no, p->dev->name, br_port_state_names[p->state]); - }/* called under bridge lock */
@@ -300,7 +299,7 @@ void br_topology_change_detection(structif (br->stp_enabled !=BR_KERNEL_STP )return ; -pr_info ("%s: topology change detected, %s\n" , br->dev->name, +br_info (br,"topology change detected, %s\n" , isroot ?"propagating" :"sending tcn bpdu" );if (isroot) {
@@ -469,8 +468,8 @@ void br_received_config_bpdu(struct net_void br_received_tcn_bpdu (struct net_bridge_port *p) {if (br_is_designated_port (p)) { -pr_info ("%s: received tcn bpdu on port %i(%s)\n" , - p->br->dev->name, p->port_no, p->dev->name); +br_info (p->br,"port %u(%s) received tcn bpdu\n" , + (unsigned ) p->port_no, p->dev->name);br_topology_change_detection (p->br);br_topology_change_acknowledge (p);
net/bridge/br_private.h +15 -0
@@ -240,6 +240,21 @@ struct br_input_skb_cb {# define BR_INPUT_SKB_CB_MROUTERS_ONLY (__skb) (0)#endif +#define br_printk(level, br, format, args...) \ + printk(level "%s: " format, (br)->dev->name, ##args) + +#define br_err(__br, format, args...) \ + br_printk(KERN_ERR, __br, format, ##args) +#define br_warn(__br, format, args...) \ + br_printk(KERN_WARNING, __br, format, ##args) +#define br_notice(__br, format, args...) \ + br_printk(KERN_NOTICE, __br, format, ##args) +#define br_info(__br, format, args...) \ + br_printk(KERN_INFO, __br, format, ##args) + +#define br_debug(br, format, args...) \ + pr_debug("%s: " format, (br)->dev->name, ##args) +extern struct notifier_block br_device_notifier;extern const u8 br_group_address[ETH_ALEN ];
net/bridge/br_device.c +2 -3
@@ -255,9 +255,8 @@ void br_netpoll_enable(struct net_bridge dev->npinfo = br->dev->npinfo; }else if (!(br->dev->priv_flags &IFF_DISABLE_NETPOLL )) { br->dev->priv_flags |=IFF_DISABLE_NETPOLL ; -printk (KERN_INFO "%s:new device %s" -" does not support netpoll (disabling)" , - br->dev->name, dev->name); +br_info (br,"new device %s does not support netpoll (disabling)" , + dev->name); } }
Re: [PATCH 2/4] bridge: change console message interface
From: Stephen Hemminger <[email protected]>
Date: Mon, 10 May 2010 12:31:09 -0700
Quoted 6 lines
Use one set of macro's for all bridge messages.
Note: can't use
netdev_XXXmacro's because bridge is purely virtual and has no device parent.Signed-off-by Stephen Hemminger <[email protected]>
Applied.
PATCH 3/4 bridge: netfilter use net_ratelimit
In reply to Stephen HemmingerThe function __br_dnat_complain is basically reimplementing existing net_ratelimit.
net/bridge/br_netfilter.c +6 -13
@@ -253,17 +253,6 @@ static int br_nf_pre_routing_finish_ipv6return 0 ; } -static void __br_dnat_complain (void ) -{ -static unsigned long last_complaint; - -if (jiffies - last_complaint >=5 *HZ ) { -printk (KERN_WARNING "Performing cross-bridge DNAT requires IP " -"forwarding to be enabled\n" ); - last_complaint = jiffies; - } -} -/* This requires some explaining. If DNAT has taken place, * we will need to fix up the destination Ethernet address, * and this is a tricky process.
@@ -382,8 +371,12 @@ static int br_nf_pre_routing_finish(stru/* we are sure that forwarding is disabled, so printing * this message is no problem. Note that the packet could * still have a martian destination address, in which case -* the packet could be dropped even if forwarding were enabled */ -__br_dnat_complain (); +* the packet could be dropped even if forwarding were enabled +*/ +if (net_ratelimit ()) +netdev_warn (dev,"Performing cross-bridge DNAT " +"requires IP forwarding to be enabled\n" ); +dst_release ((struct dst_entry *)rt); } free_skb:
David Miller
maintainerRe: [PATCH 3/4] bridge: netfilter use net_ratelimit
From: Stephen Hemminger <[email protected]>
Date: Mon, 10 May 2010 12:31:10 -0700
Quoted 4 lines
The function
__br_dnat_complainis basically reimplementing existingnet_ratelimit.Signed-off-by Stephen Hemminger <[email protected]>
This code is no longer there after the recent netfilter merges.
PATCH 4/4 bridge: update sysfs link names if port device names have changed
In reply to Stephen HemmingerFrom: Simon Arlott <[email protected]>
Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge.
As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link.
This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link.
https://bugzilla.kernel.org/show_bug.cgi?id=12743
---
Modified to apply to net-next and fix checkpatch warnings -- stephen
fs/sysfs/symlink.c | 1 + net/bridge/br_if.c | 2 +- net/bridge/br_notify.c | 7 +++++++ net/bridge/br_private.h | 6 ++++++ net/bridge/br_sysfs_if.c | 32 +++++++++++++++++++++++++++----- 5 files changed, 42 insertions(+), 6 deletions(-)
fs/sysfs/symlink.c +1 -0
@@ -261,3 +261,4 @@ const struct inode_operations sysfs_symlEXPORT_SYMBOL_GPL (sysfs_create_link);EXPORT_SYMBOL_GPL (sysfs_remove_link); +EXPORT_SYMBOL_GPL (sysfs_rename_link);
net/bridge/br_if.c +1 -1
@@ -133,7 +133,7 @@ static void del_nbp(struct net_bridge_postruct net_bridge *br = p->br;struct net_device *dev = p->dev; -sysfs_remove_link (br->ifobj, dev->name); +sysfs_remove_link (br->ifobj, p->sysfs_name);dev_set_promiscuity (dev,-1 );
net/bridge/br_notify.c +7 -0
@@ -34,6 +34,7 @@ static int br_device_event(struct notifistruct net_device *dev = ptr;struct net_bridge_port *p = dev->br_port;struct net_bridge *br; +int err;/* not a port of a bridge */ if (p ==NULL )
@@ -83,6 +84,12 @@ static int br_device_event(struct notifibr_del_if (br, dev);break ; +case NETDEV_CHANGENAME : + err =br_sysfs_renameif (p); +if (err) +return notifier_from_errno (err); +break ; +case NETDEV_PRE_TYPE_CHANGE :/* Forbid underlaying device to change its type. */ return NOTIFY_BAD ;
net/bridge/br_private.h +6 -0
@@ -139,6 +139,10 @@ struct net_bridge_portstruct hlist_head mglist;struct hlist_node rlist;#endif + +#ifdef CONFIG_SYSFS +char sysfs_name[IFNAMSIZ ]; +#endif };struct br_cpu_netstats {
@@ -480,6 +484,7 @@ extern void br_ifinfo_notify(int event,/* br_sysfs_if.c */ extern const struct sysfs_ops brport_sysfs_ops;extern int br_sysfs_addif (struct net_bridge_port *p); +extern int br_sysfs_renameif (struct net_bridge_port *p);/* br_sysfs_br.c */ extern int br_sysfs_addbr (struct net_device *dev);
@@ -488,6 +493,7 @@ extern void br_sysfs_delbr(struct net_de#else #define br_sysfs_addif (p) (0) +#define br_sysfs_renameif (p) (0)#define br_sysfs_addbr (dev) (0)#define br_sysfs_delbr (dev) do { } while(0)#endif /* CONFIG_SYSFS */
net/bridge/br_sysfs_if.c +27 -5
@@ -246,7 +246,7 @@ const struct sysfs_ops brport_sysfs_ops/* * Add sysfs entries to ethernet device added to a bridge. * Creates a brport subdirectory with bridge attributes. -* Puts symlink in bridge's brport subdirectory +* Puts symlink in bridge's brif subdirectory */ int br_sysfs_addif (struct net_bridge_port *p) {
@@ -257,15 +257,37 @@ int br_sysfs_addif(struct net_bridge_por err =sysfs_create_link (&p->kobj, &br->dev->dev.kobj,SYSFS_BRIDGE_PORT_LINK );if (err) - goto out2; +return err;for (a = brport_attrs; *a; ++a) { err =sysfs_create_file (&p->kobj, &((*a)->attr));if (err) - goto out2; +return err; } - err =sysfs_create_link (br->ifobj, &p->kobj, p->dev->name); -out2: +strlcpy (p->sysfs_name, p->dev->name,IFNAMSIZ ); +return sysfs_create_link (br->ifobj, &p->kobj, p->sysfs_name); +} + +/* Rename bridge's brif symlink */ +int br_sysfs_renameif (struct net_bridge_port *p) +{ +struct net_bridge *br = p->br; +int err; + +/* If a rename fails, the rollback will cause another +* rename call with the existing name. +*/ +if (!strncmp (p->sysfs_name, p->dev->name,IFNAMSIZ )) +return 0 ; + + err =sysfs_rename_link (br->ifobj, &p->kobj, + p->sysfs_name, p->dev->name); +if (err) +netdev_notice (br->dev,"unable to rename link %s to %s" , + p->sysfs_name, p->dev->name); +else +strlcpy (p->sysfs_name, p->dev->name,IFNAMSIZ ); +return err; }
Re: [PATCH 4/4] bridge: update sysfs link names if port device names have changed
From: Stephen Hemminger <[email protected]>
Date: Mon, 10 May 2010 12:31:11 -0700
Quoted 12 lines
From: Simon Arlott <[email protected]>
Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge.
As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link.
Quoted 7 lines
This fixes the problem by listening for
NETDEV_CHANGENAMEnotifications and renaming the link.https://bugzilla.kernel.org/show_bug.cgi?id=12743
Signed-off-by Simon Arlott <[email protected]>
Applied.