powerpc/pseries: Add support for IO Event interrupt drivers
PATCH 1/1 powerpc/pseries: Add support for IO Event interrupt drivers
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
There is one ibm,io-events interrupt, but this interrupt might be used for multiple I/O devices, each with their own separate driver. So, we create a platform interrupt handler that will do the RTAS check-exception call and then call the appropriate driver's interrupt handler (the one(s) that registered with a scope that matches the scope of the incoming interrupt).
So, a driver for a device that uses IO Event interrupts will register it's interrupt service routine (or interrupt handler) with the platform code using ioei_register_isr(). This register function takes a function pointer to the driver's handler and the scope that the driver is interested in (scopes defined in arch/powerpc/include/asm/io_events.h). The driver's handler must take a pointer to a struct io_events_section and must not return anything.
The platform code registers io_event_interrupt() as the interrupt handler for the ibm,io-events interrupt. Upon receiving an IO Event interrupt, it checks the scope of the incoming interrupt and only calls those drivers' handlers that have registered as being interested in that scope.
It is possible for a single driver to register the same function pointer more than once with different scopes if it is interested in more than one type of IO Event interrupt. If a handler wants to be notified of all incoming IO Event interrupts it can register with IOEI_SCOPE_ANY.
A driver can unregister to stop receiving the IO Event interrupts using ioei_unregister_isr(), passing it the same function pointer to the driver's handler and the scope the driver was registered with.
--- arch/powerpc/include/asm/io_events.h | 40 +++++ arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/io_events.c | 205 +++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/io_events.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* Copyright 2010 IBM Corporation, Mark Nelson +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +*/ + +#ifndef _ASM_POWERPC_IOEVENTS_H +#define _ASM_POWERPC_IOEVENTS_H + +struct io_events_section { +u16 id;// Unique section identifier x00-x01 +u16 length;// Section length (bytes) x02-x03 +u8 version;// Section Version x04-x04 +u8 sec_subtype;// Section subtype x05-x05 +u16 creator_id;// Creator Component ID x06-x07 +u8 event_type;// IO-Event Type x08-x08 +u8 rpc_field_len;// PRC Field Length x09-x09 +u8 scope;// Error/Event Scope x0A-x0A +u8 event_subtype;// I/O-Event Sub-Type x0B-x0B +u32 drc_index;// DRC Index x0C-x0F +u32 rpc_data[];// RPC Data (optional) x10-... +}; + +#define IOEI_SCOPE_NOT_APP 0x00 +#define IOEI_SCOPE_RIO_HUB 0x36 +#define IOEI_SCOPE_RIO_BRIDGE 0x37 +#define IOEI_SCOPE_PHB 0x38 +#define IOEI_SCOPE_EADS_GLOBAL 0x39 +#define IOEI_SCOPE_EADS_SLOT 0x3A +#define IOEI_SCOPE_TORRENT_HUB 0x3B +#define IOEI_SCOPE_SERVICE_PROC 0x51 +#define IOEI_SCOPE_ANY -1 + +int ioei_register_isr (void (*isr)(struct io_events_section *),int scope); +int ioei_unregister_isr (void (*isr)(struct io_events_section *),int scope); + +#endif /* _ASM_POWERPC_IOEVENTS_H */
arch/powerpc/platforms/pseries/io_events.c new file +205 -0
205 lines not on this page · raw message
arch/powerpc/platforms/pseries/Makefile +1 -1
@@ -8,7 +8,7 @@ endif obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o
Quoted 2 lines · Mark Nelson
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
Hi Mark,
You'll have to explain to me offline sometime how it is we ran out of interrupts and started needing to multiplex them ..
Quoted 15 lines
There is one ibm,io-events interrupt, but this interrupt might be used for multiple I/O devices, each with their own separate driver. So, we create a platform interrupt handler that will do the RTAS check-exception call and then call the appropriate driver's interrupt handler (the one(s) that registered with a scope that matches the scope of the incoming interrupt).
So, a driver for a device that uses IO Event interrupts will register it's interrupt service routine (or interrupt handler) with the platform code using
ioei_register_isr(). This register function takes a function pointer to the driver's handler and the scope that the driver is interested in (scopes defined inarch/powerpc/include/asm/io_events.h). The driver's handler must take a pointer to a structio_events_sectionand must not return anything.
Quoted 4 lines
The platform code registers
io_event_interrupt()as the interrupt handler for the ibm,io-events interrupt. Upon receiving an IO Event interrupt, it checks the scope of the incoming interrupt and only calls those drivers' handlers that have registered as being interested in that scope.
The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
Quoted 21 lines
It is possible for a single driver to register the same function pointer more than once with different scopes if it is interested in more than one type of IO Event interrupt. If a handler wants to be notified of all incoming IO Event interrupts it can register with
IOEI_SCOPE_ANY.A driver can unregister to stop receiving the IO Event interrupts using
ioei_unregister_isr(), passing it the same function pointer to the driver's handler and the scope the driver was registered with.Signed-off-by Mark Nelson <[email protected]>--- arch/powerpc/include/asm/io_events.h | 40 +++++ arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/io_events.c | 205 +++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 1 deletion(-)Index:
upstream/arch/powerpc/include/asm/io_events.h
===================================================================
arch/powerpc/include/asm/io_events.h line 2
Quoted 2 lines
arch/powerpc/include/asm/io_events.h new file +2
-0@@ -0,0 +1,40 @@ +/* +* Copyright 2010 IBM Corporation, Mark Nelson
I usually have name, corp, but I'm not sure if it matters.
Quoted 12 lines
arch/powerpc/include/asm/io_events.h new file +12
-0+* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +*/ + +#ifndef _ASM_POWERPC_IOEVENTS_H +#define _ASM_POWERPC_IOEVENTS_H + +struct io_events_section { + u16 id; // Unique section identifier x00-x01 + u16 length; // Section length (bytes) x02-x03
arch/powerpc/include/asm/io_events.h line 25
Quoted 10 lines
arch/powerpc/include/asm/io_events.h new file +10
-0+u8 version;// Section Version x04-x04 +u8 sec_subtype;// Section subtype x05-x05 +u16 creator_id;// Creator Component ID x06-x07 +u8 event_type;// IO-Event Type x08-x08 +u8 rpc_field_len;// PRC Field Length x09-x09 +u8 scope;// Error/Event Scope x0A-x0A +u8 event_subtype;// I/O-Event Sub-Type x0B-x0B +u32 drc_index;// DRC Index x0C-x0F +u32 rpc_data[];// RPC Data (optional) x10-... +};
I know it's idiomatic in that sort of code, but C++ comments?
arch/powerpc/include/asm/io_events.h line 38
Quoted 12 lines
arch/powerpc/include/asm/io_events.h new file +12
-0+#define IOEI_SCOPE_NOT_APP 0x00 +#define IOEI_SCOPE_RIO_HUB 0x36 +#define IOEI_SCOPE_RIO_BRIDGE 0x37 +#define IOEI_SCOPE_PHB 0x38 +#define IOEI_SCOPE_EADS_GLOBAL 0x39 +#define IOEI_SCOPE_EADS_SLOT 0x3A +#define IOEI_SCOPE_TORRENT_HUB 0x3B +#define IOEI_SCOPE_SERVICE_PROC 0x51 +#define IOEI_SCOPE_ANY -1 + +int ioei_register_isr (void (*isr)(struct io_events_section *),int scope); +int ioei_unregister_isr (void (*isr)(struct io_events_section *),int scope);
Given these are exported to the whole kernel I'd vote for pseries_ioei_register_isr(), if I get to vote that is.
Quoted 20 lines
Index:
upstream/arch/powerpc/platforms/pseries/io_events.c
===================================================================arch/powerpc/platforms/pseries/io_events.c new file +15
-0@@ -0,0 +1,205 @@ +/* +* Copyright 2010 IBM Corporation, Mark Nelson +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +*/ + +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/interrupt.h>
arch/powerpc/platforms/pseries/io_events.c line 25
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+#include <linux/of.h> + +#include <asm/io_events.h> +#include <asm/rtas.h> +#include <asm/irq.h> + +#include "event_sources.h" + +struct ioei_consumer { +void (*ioei_isr)(struct io_events_section *);
Function pointers is one case where a typedef can make the code easier to read, if you like.
arch/powerpc/platforms/pseries/io_events.c line 28
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+int scope; +struct ioei_consumer *next; +};
You forgot the fourth commandment:
Thou shalt not write thine own linked list implementation when there already exist several perfectly good ones in the kernel!
Or is there some good reason for it I'm missing? :)
You could even use a hlist to save a void * in your list head.
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+static int ioei_check_exception_token; + +static unsigned char ioei_log_buf[RTAS_ERROR_LOG_MAX ]; +static DEFINE_SPINLOCK (ioei_log_buf_lock); +
arch/powerpc/platforms/pseries/io_events.c line 44
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+static struct ioei_consumer *ioei_isr_list; +static DEFINE_SPINLOCK (ioei_isr_list_lock); + +int ioei_register_isr (void (*isr)(struct io_events_section *),int scope) +{ +struct ioei_consumer *iter; +struct ioei_consumer *cons; +int ret =0 ; + +spin_lock (&ioei_isr_list_lock);
Here and unregister you should be using spin_lock_irq(), because you need to protect against an interrupt and you know you're not being called from an irq handler (so you don't need save/restore - though you could use it anyway to be lazy :D).
Quoted 6 lines
arch/powerpc/platforms/pseries/io_events.c new file +6
-0+/* check to see if we've already registered this function with +* this scope. If we have, don't register it again +*/ + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope)
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+break ; + iter = iter->next; + } + +if (iter) { + ret = -EEXIST ; + goto out; + } + + cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );
But you don't want to kmalloc while holding the lock and with interrupts off.
Quoted 48 lines
arch/powerpc/platforms/pseries/io_events.c new file +48
-0+if (!cons) { + ret = -ENOMEM ; + goto out; + } + + cons->ioei_isr = isr; + cons->scope = scope; + + cons->next = ioei_isr_list; + ioei_isr_list = cons; + +out: +spin_unlock (&ioei_isr_list_lock); + +return ret; +} +EXPORT_SYMBOL_GPL (ioei_register_isr); + +int ioei_unregister_isr (void (*isr)(struct io_events_section *),int scope) +{ +struct ioei_consumer *iter; +struct ioei_consumer *prev =NULL ; +int ret =0 ; + +spin_lock (&ioei_isr_list_lock); + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + prev = iter; + iter = iter->next; + } + +if (!iter) { + ret = -ENOENT ; + goto out; + } + +if (prev) + prev->next = iter->next; +else + ioei_isr_list = iter->next; + +kfree (iter); + +out: +spin_unlock (&ioei_isr_list_lock); +
arch/powerpc/platforms/pseries/io_events.c line 119
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+return ret; +} +EXPORT_SYMBOL_GPL (ioei_unregister_isr); + +static void ioei_call_consumers (int scope,struct io_events_section *sec) +{ +struct ioei_consumer *iter; +unsigned long flags; + +spin_lock_irqsave (&ioei_isr_list_lock, flags);
You don't need to disable interrupts, because you're being called from the interrupt handler, and it won't be called again until you're finished.
Quoted 16 lines
arch/powerpc/platforms/pseries/io_events.c new file +16
-0+ iter = ioei_isr_list; +while (iter) { +if (iter->scope == scope || iter->scope ==IOEI_SCOPE_ANY ) + iter->ioei_isr (sec); + iter = iter->next; + } + +spin_unlock_irqrestore (&ioei_isr_list_lock, flags); +} + +#define EXT_INT_VECTOR_OFFSET 0x500 +#define RTAS_TYPE_IO_EVENT 0xE1 + +static irqreturn_t io_event_interrupt (int irq,void *dev_id) +{ +struct rtas_error_log *rtas_elog;
arch/powerpc/platforms/pseries/io_events.c line 145
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+struct io_events_section *ioei_sec; +char *ch_ptr; +int status; +u16 *sec_len; + +spin_lock (&ioei_log_buf_lock); + + status = rtas_call(ioei_check_exception_token, 6, 1, NULL, + EXT_INT_VECTOR_OFFSET, + irq_map[irq].hwirq,
This is going to be slow anyway, you may as well use virq_to_hw().
arch/powerpc/platforms/pseries/io_events.c line 146
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ RTAS_IO_EVENTS, 1 /*Time Critical */,
Missing space before the T ^
arch/powerpc/platforms/pseries/io_events.c line 147
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ __pa(&ioei_log_buf),
Does the buffer need to be aligned, and/or inside the RMO? I'd guess yes.
arch/powerpc/platforms/pseries/io_events.c line 158
Quoted 11 lines
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+ rtas_get_error_log_max()); + + rtas_elog = (struct rtas_error_log *)ioei_log_buf; + +if (status !=0 ) + goto out; + +/* We assume that we will only ever get called for io-event +* interrupts. But if we get called with something else +* make some noise about it. +*/
That would mean we'd requested the wrong interrupt wouldn't it? I'd almost BUG, but benh always bitches that I do that too often so .. :)
arch/powerpc/platforms/pseries/io_events.c line 170
Quoted 12 lines
arch/powerpc/platforms/pseries/io_events.c new file +12
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 ); + goto out; + } + +/* there are 24 bytes of event log data before the first section +* (Main-A) begins +*/ + ch_ptr = (char *)ioei_log_buf +24 ;
Any reason you're casting from unsigned char to char?
arch/powerpc/platforms/pseries/io_events.c line 178
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+/* loop through all the sections until we get to the IO Events +* Section, with section ID "IE" +*/ +while (*ch_ptr !='I' && *(ch_ptr +1 ) !='E' ) { + sec_len = (u16 *)(ch_ptr +2 ); + ch_ptr += *sec_len; + }
This would be neater if you cast to io_events_section and used the fields I think.
And even better if you know the length will be a multiple of the section_header size, you can do the arithmetic in those terms.
arch/powerpc/platforms/pseries/io_events.c line 182
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+ ioei_sec = (struct io_events_section *)ch_ptr; + +ioei_call_consumers (ioei_sec->scope, ioei_sec);
Guaranteed to be only one section returned to us per call?
We /could/ copy the ioei_sec and drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.
arch/powerpc/platforms/pseries/io_events.c line 190
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+out: +spin_unlock (&ioei_log_buf_lock); + +return IRQ_HANDLED ; +} + +static int __init init_ioei_IRQ (void )
Never understood why IRQ always (sometimes) gets caps ..
arch/powerpc/platforms/pseries/io_events.c line 194
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+{ +struct device_node *np; + + ioei_check_exception_token =rtas_token ("check-exception" );
Meep, need to check if it actually exists.
arch/powerpc/platforms/pseries/io_events.c line 197
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+ np =of_find_node_by_path ("/event-sources/ibm,io-events" ); +if (np !=NULL ) {
if (np) would usually do it
arch/powerpc/platforms/pseries/io_events.c line 204
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+request_event_sources_irqs (np, io_event_interrupt,"IO_EVENT" ); +of_node_put (np); + } + +return 0 ; +} +device_initcall (init_ioei_IRQ);
Should probably be a machine_initcall().
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 10 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +1
-1@@ -8,7 +8,7 @@ endif obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.o
The BML guys might appreciate an option to turn it off?
cheers
PATCH 1/1 powerpc/pseries: Add support for IO Event interrupt drivers
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Mark Nelson
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
Hi Mark,
You'll have to explain to me offline sometime how it is we ran out of interrupts and started needing to multiplex them ..
Firmware has decided to multiplex all i/o error reporting through a single interrupt for reasons unknown, that is the primary reason for this patch.
One question is, we already register a few RAS interrupts which call RTAS using check-exception for getting error information. Those live in platforms/pseries/ras.c -- should we combine the two into a common implementation somehow?
Quoted 15 lines
Quoted 15 lines
There is one ibm,io-events interrupt, but this interrupt might be used for multiple I/O devices, each with their own separate driver. So, we create a platform interrupt handler that will do the RTAS check-exception call and then call the appropriate driver's interrupt handler (the one(s) that registered with a scope that matches the scope of the incoming interrupt).
So, a driver for a device that uses IO Event interrupts will register it's interrupt service routine (or interrupt handler) with the platform code using
ioei_register_isr(). This register function takes a function pointer to the driver's handler and the scope that the driver is interested in (scopes defined inarch/powerpc/include/asm/io_events.h). The driver's handler must take a pointer to a structio_events_sectionand must not return anything.
Quoted 8 lines
Quoted 4 lines
The platform code registers
io_event_interrupt()as the interrupt handler for the ibm,io-events interrupt. Upon receiving an IO Event interrupt, it checks the scope of the incoming interrupt and only calls those drivers' handlers that have registered as being interested in that scope.The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
Nope it shouldn't be performance critical, but it does raise the point that the current RTAS implementation in Linux *always* uses the global lock. There is a set of calls which are not required to be serialized against each other. This would be a totally different patchset to fix that problem. The "check-exception" call is one that doesn't require the global RTAS lock. I might work on that someday :-)
<snip>
Quoted 11 lines
Quoted 11 lines
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+/* check to see if we've already registered this function with +* this scope. If we have, don't register it again +*/ + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + iter = iter->next; + } + +if (iter) {
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ ret = -EEXIST ; + goto out; + } + + cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );But you don't want to kmalloc while holding the lock and with interrupts off.
Well, he could use GFP_ATOMIC but that's the wrong approach. You should allocate the buffer (using GFP_KERNEL) before taking the spin lock.
<snip>
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c line 131
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+#define EXT_INT_VECTOR_OFFSET 0x500 +#define RTAS_TYPE_IO_EVENT 0xE1
These defines should probably go in <asm/rtas.h>
I noticed the code in ras.c has it's own define too RAS_VECTOR_OFFSET for 0x500 and asm/rtas.h actually has RTAS_TYPE_IO for 0xE1
Quoted 17 lines
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+ +static irqreturn_t io_event_interrupt (int irq,void *dev_id) +{ +struct rtas_error_log *rtas_elog;arch/powerpc/platforms/pseries/io_events.c line 145
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+struct io_events_section *ioei_sec; +char *ch_ptr; +int status; +u16 *sec_len; + +spin_lock (&ioei_log_buf_lock); + + status = rtas_call(ioei_check_exception_token, 6, 1, NULL, + EXT_INT_VECTOR_OFFSET, + irq_map[irq].hwirq,This is going to be slow anyway, you may as well use
virq_to_hw().
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 146
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ RTAS_IO_EVENTS, 1 /*Time Critical */,Missing space before the T ^
arch/powerpc/platforms/pseries/io_events.c line 147
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ __pa(&ioei_log_buf),Does the buffer need to be aligned, and/or inside the RMO? I'd guess yes.
The docs for check-exception don't particularly specify alignment requirements, but RTAS in generally going to want it in the RMO
Also, if we're going to go ahead and use rtas_call() which locks it's own buffer which meets the requirements, why do we even need a separate buffer? Really, we should make this call, then copy the content of the buffer before handing it over to the drivers.
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c line 148
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ rtas_get_error_log_max());
Here, we're passing back what RTAS told us what it's max is which doesn't necessarily equal the static buffer size we allocated which can cause a buffer overflow. So this argument should be the static size of the buffer.
Quoted 14 lines
arch/powerpc/platforms/pseries/io_events.c line 158
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+ + rtas_elog = (struct rtas_error_log *)ioei_log_buf; + +if (status !=0 ) + goto out; + +/* We assume that we will only ever get called for io-event +* interrupts. But if we get called with something else +* make some noise about it. +*/ That would mean we'd requested the wrong interrupt wouldn't it? I'd almost BUG, but benh always bitches that I do that too often so .. :)
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c line 165
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 ); + goto out; + }
Should we try to process this instead of just warning? The type we get might be one of the the ones we recognize in ras.c; so this is an argument for combining ras.c with this code or at least report this in the same manner we report any other RTAS error log.
Quoted 28 lines
arch/powerpc/platforms/pseries/io_events.c line 170
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ +/* there are 24 bytes of event log data before the first section +* (Main-A) begins +*/ + ch_ptr = (char *)ioei_log_buf +24 ;Any reason you're casting from unsigned char to char?
arch/powerpc/platforms/pseries/io_events.c line 178
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+/* loop through all the sections until we get to the IO Events +* Section, with section ID "IE" +*/ +while (*ch_ptr !='I' && *(ch_ptr +1 ) !='E' ) { + sec_len = (u16 *)(ch_ptr +2 ); + ch_ptr += *sec_len; + }This would be neater if you cast to
io_events_sectionand used the fields I think.And even better if you know the length will be a multiple of the
section_headersize, you can do the arithmetic in those terms.arch/powerpc/platforms/pseries/io_events.c line 182
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+ ioei_sec = (struct io_events_section *)ch_ptr; + +ioei_call_consumers (ioei_sec->scope, ioei_sec);Guaranteed to be only one section returned to us per call?
Quoted 4 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.
I think we *have* to copy it because we don't want our lock held when we call random handlers.
Quoted 38 lines
arch/powerpc/platforms/pseries/io_events.c line 190
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+out: +spin_unlock (&ioei_log_buf_lock); + +return IRQ_HANDLED ; +} + +static int __init init_ioei_IRQ (void )Never understood why IRQ always (sometimes) gets caps ..
arch/powerpc/platforms/pseries/io_events.c line 194
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+{ +struct device_node *np; + + ioei_check_exception_token =rtas_token ("check-exception" );Meep, need to check if it actually exists.
arch/powerpc/platforms/pseries/io_events.c line 197
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+ np =of_find_node_by_path ("/event-sources/ibm,io-events" ); +if (np !=NULL ) {if (np) would usually do it
arch/powerpc/platforms/pseries/io_events.c line 204
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+request_event_sources_irqs (np, io_event_interrupt,"IO_EVENT" ); +of_node_put (np); + } + +return 0 ; +} +device_initcall (init_ioei_IRQ);Should probably be a
machine_initcall().Quoted 6 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +0
-0@@ -8,7 +8,7 @@ endif
Quoted 6 lines
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 4 lines
arch/powerpc/platforms/pseries/Makefile +1
-1obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.oThe BML guys might appreciate an option to turn it off?
Or, we might subvert it for our own evil purposes ;-)
Sonny
Quoted 11 lines · On Wednesday 19 May 2010 14:27:44 Sonny Rao wrote:
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Mark Nelson
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
Hi Mark,
You'll have to explain to me offline sometime how it is we ran out of interrupts and started needing to multiplex them ..
Quoted 7 lines
Firmware has decided to multiplex all i/o error reporting through a single interrupt for reasons unknown, that is the primary reason for this patch.
One question is, we already register a few RAS interrupts which call RTAS using check-exception for getting error information. Those live in
platforms/pseries/ras.c-- should we combine the two into a common implementation somehow?
I developed in ras.c but then moved it out just for functional separation but you could be right in that they should live together. I'll have another look at it when I've fixed it up.
Quoted 54 lines
Quoted 16 lines
Quoted 16 lines
There is one ibm,io-events interrupt, but this interrupt might be used for multiple I/O devices, each with their own separate driver. So, we create a platform interrupt handler that will do the RTAS check-exception call and then call the appropriate driver's interrupt handler (the one(s) that registered with a scope that matches the scope of the incoming interrupt).
So, a driver for a device that uses IO Event interrupts will register it's interrupt service routine (or interrupt handler) with the platform code using
ioei_register_isr(). This register function takes a function pointer to the driver's handler and the scope that the driver is interested in (scopes defined inarch/powerpc/include/asm/io_events.h). The driver's handler must take a pointer to a structio_events_sectionand must not return anything.Quoted 8 lines
Quoted 4 lines
The platform code registers
io_event_interrupt()as the interrupt handler for the ibm,io-events interrupt. Upon receiving an IO Event interrupt, it checks the scope of the incoming interrupt and only calls those drivers' handlers that have registered as being interested in that scope.The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
Nope it shouldn't be performance critical, but it does raise the point that the current RTAS implementation in Linux *always* uses the global lock. There is a set of calls which are not required to be serialized against each other. This would be a totally different patchset to fix that problem. The "check-exception" call is one that doesn't require the global RTAS lock. I might work on that someday :-)
<snip>
Quoted 11 lines
Quoted 11 lines
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+/* check to see if we've already registered this function with +* this scope. If we have, don't register it again +*/ + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + iter = iter->next; + } + +if (iter) {Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ ret = -EEXIST ; + goto out; + } + + cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );But you don't want to kmalloc while holding the lock and with interrupts off.
Quoted 3 lines
Well, he could use
GFP_ATOMICbut that's the wrong approach. You should allocate the buffer (usingGFP_KERNEL) before taking the spin lock.
And then free it before returning in the case that we've got a duplicate, right?
Quoted 9 lines
<snip>
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c line 131
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+#define EXT_INT_VECTOR_OFFSET 0x500 +#define RTAS_TYPE_IO_EVENT 0xE1These defines should probably go in <
asm/rtas.h>I noticed the code in
ras.chas it's own define tooRAS_VECTOR_OFFSETfor0x500andasm/rtas.hactually hasRTAS_TYPE_IOfor0xE1
I'm not sure how I missed RTAS_TYPE_IO in <asm/rtas.h> but I'll use that and then add EXT_INT_VECTOR_OFFSET and update the RAS code to use it too.
Quoted 27 lines
Quoted 18 lines
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+ +static irqreturn_t io_event_interrupt (int irq,void *dev_id) +{ +struct rtas_error_log *rtas_elog;arch/powerpc/platforms/pseries/io_events.c line 145
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+struct io_events_section *ioei_sec; +char *ch_ptr; +int status; +u16 *sec_len; + +spin_lock (&ioei_log_buf_lock); + + status = rtas_call(ioei_check_exception_token, 6, 1, NULL, + EXT_INT_VECTOR_OFFSET, + irq_map[irq].hwirq,This is going to be slow anyway, you may as well use
virq_to_hw().Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 146
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ RTAS_IO_EVENTS, 1 /*Time Critical */,Missing space before the T ^
arch/powerpc/platforms/pseries/io_events.c line 147
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ __pa(&ioei_log_buf),Does the buffer need to be aligned, and/or inside the RMO? I'd guess yes.
Quoted 7 lines
The docs for check-exception don't particularly specify alignment requirements, but RTAS in generally going to want it in the RMO
Also, if we're going to go ahead and use
rtas_call()which locks it's own buffer which meets the requirements, why do we even need a separate buffer? Really, we should make this call, then copy the content of the buffer before handing it over to the drivers.
That sounds like a good idea, I'll update it to do the copy.
Quoted 8 lines
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c line 148
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ rtas_get_error_log_max());Here, we're passing back what RTAS told us what it's max is which doesn't necessarily equal the static buffer size we allocated which can cause a buffer overflow. So this argument should be the static size of the buffer.
Excellent pickup. Thanks!
Quoted 15 lines
Quoted 15 lines
arch/powerpc/platforms/pseries/io_events.c line 158
Quoted 11 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+ + rtas_elog = (struct rtas_error_log *)ioei_log_buf; + +if (status !=0 ) + goto out; + +/* We assume that we will only ever get called for io-event +* interrupts. But if we get called with something else +* make some noise about it. +*/ That would mean we'd requested the wrong interrupt wouldn't it? I'd almost BUG, but benh always bitches that I do that too often so .. :)
Quoted 13 lines
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c line 165
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 ); + goto out; + }Should we try to process this instead of just warning? The type we get might be one of the the ones we recognize in
ras.c; so this is an argument for combiningras.cwith this code or at least report this in the same manner we report any other RTAS error log.
I don't think we would every actually get this case occurring but I'll definitely have a look at the combining idea.
Quoted 29 lines
Quoted 29 lines
arch/powerpc/platforms/pseries/io_events.c line 170
Quoted 6 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ +/* there are 24 bytes of event log data before the first section +* (Main-A) begins +*/ + ch_ptr = (char *)ioei_log_buf +24 ;Any reason you're casting from unsigned char to char?
arch/powerpc/platforms/pseries/io_events.c line 178
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+/* loop through all the sections until we get to the IO Events +* Section, with section ID "IE" +*/ +while (*ch_ptr !='I' && *(ch_ptr +1 ) !='E' ) { + sec_len = (u16 *)(ch_ptr +2 ); + ch_ptr += *sec_len; + }This would be neater if you cast to
io_events_sectionand used the fields I think.And even better if you know the length will be a multiple of the
section_headersize, you can do the arithmetic in those terms.arch/powerpc/platforms/pseries/io_events.c line 182
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+ ioei_sec = (struct io_events_section *)ch_ptr; + +ioei_call_consumers (ioei_sec->scope, ioei_sec);Guaranteed to be only one section returned to us per call?
Quoted 7 lines
Quoted 4 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.I think we *have* to copy it because we don't want our lock held when we call random handlers.
That's a very good point.
Quoted 39 lines
Quoted 39 lines
arch/powerpc/platforms/pseries/io_events.c line 190
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+out: +spin_unlock (&ioei_log_buf_lock); + +return IRQ_HANDLED ; +} + +static int __init init_ioei_IRQ (void )Never understood why IRQ always (sometimes) gets caps ..
arch/powerpc/platforms/pseries/io_events.c line 194
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+{ +struct device_node *np; + + ioei_check_exception_token =rtas_token ("check-exception" );Meep, need to check if it actually exists.
arch/powerpc/platforms/pseries/io_events.c line 197
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+ np =of_find_node_by_path ("/event-sources/ibm,io-events" ); +if (np !=NULL ) {if (np) would usually do it
arch/powerpc/platforms/pseries/io_events.c line 204
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+request_event_sources_irqs (np, io_event_interrupt,"IO_EVENT" ); +of_node_put (np); + } + +return 0 ; +} +device_initcall (init_ioei_IRQ);Should probably be a
machine_initcall().Quoted 6 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +0
-0@@ -8,7 +8,7 @@ endif
Quoted 8 lines
Quoted 6 lines
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 4 lines
arch/powerpc/platforms/pseries/Makefile +1
-1obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.oThe BML guys might appreciate an option to turn it off?
Or, we might subvert it for our own evil purposes ;-)
Would an option that gets selected by PPC_PSERIES help?
Thanks for checking over this!
Mark
Quoted 6 lines · Sonny Rao
Quoted 5 lines · Michael Ellerman
Quoted 2 lines · Mark Nelson
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
Quoted 7 lines
Quoted 4 lines
Hi Mark,
You'll have to explain to me offline sometime how it is we ran out of interrupts and started needing to multiplex them ..
Firmware has decided to multiplex all i/o error reporting through a single interrupt for reasons unknown, that is the primary reason for this patch.
Yeah, I just don't get why we would do that, but hey whatever.
Quoted 10 lines
Quoted 3 lines
The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
Nope it shouldn't be performance critical, but it does raise the point that the current RTAS implementation in Linux *always* uses the global lock. There is a set of calls which are not required to be serialized against each other. This would be a totally different patchset to fix that problem. The "check-exception" call is one that doesn't require the global RTAS lock. I might work on that someday :-)
Aha, that's kind of what I was wondering. I take it PAPR documents which calls need to be serialised and which don't?
Quoted 7 lines
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 1 line
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );But you don't want to kmalloc while holding the lock and with interrupts off.
Well, he could use
GFP_ATOMICbut that's the wrong approach. You should allocate the buffer (usingGFP_KERNEL) before taking the spin lock.
True, this is not a good example of when to use GFP_ATOMIC though :)
Quoted 4 lines
Also, if we're going to go ahead and use
rtas_call()which locks it's own buffer which meets the requirements, why do we even need a separate buffer? Really, we should make this call, then copy the content of the buffer before handing it over to the drivers.
But another CPU could rtas_call() and blow away our buffer after we've dropped the RTAS lock but before we've used the content of the buffer.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 );
Quoted 8 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ goto out; + }Should we try to process this instead of just warning? The type we get might be one of the the ones we recognize in
ras.c; so this is an argument for combiningras.cwith this code or at least report this in the same manner we report any other RTAS error log.
We could, but that would be a massive firmware bug - not that it wouldn't happen, but it would be Not Our Problem TM.
Quoted 7 lines
Quoted 4 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.I think we *have* to copy it because we don't want our lock held when we call random handlers.
They're not really random, and as long as they don't call the register/unregister routines it should be /OK/. But copying is probably good so we don't hold the lock for too long.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +0
-0@@ -8,7 +8,7 @@ endif
Quoted 8 lines
Quoted 6 lines
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 4 lines
arch/powerpc/platforms/pseries/Makefile +1
-1obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.oThe BML guys might appreciate an option to turn it off?
Or, we might subvert it for our own evil purposes ;-)
I can only imagine :)
cheers
On Wed, May 19, 2010 at 10:10:58PM +1000, Michael Ellerman wrote:
<snip>
Quoted 11 lines
Quoted 10 lines
Quoted 3 lines
The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
Nope it shouldn't be performance critical, but it does raise the point that the current RTAS implementation in Linux *always* uses the global lock. There is a set of calls which are not required to be serialized against each other. This would be a totally different patchset to fix that problem. The "check-exception" call is one that doesn't require the global RTAS lock. I might work on that someday :-)
Quoted 2 lines
Aha, that's kind of what I was wondering. I take it PAPR documents which calls need to be serialised and which don't?
Yeah, here's my workin list of what calls can avoid the global lock:
List of "re-entrant to the number of processors in the system" RTAS Calls --
ibm,get-xive
ibm,set-xive
ibm,int-off
ibm,int-on
OS machine check and soft-reset handlerse must be able to call rtas (I'm saying these are therefore re-entrant because we could deadlock if we took a machine check or reset with the global lock held) --
nvram-fetch
nvram-store
check-exception (includes our io-events) display-character
system-reboot
set-power-level(0,0)
power-off
ibm,set-eeh-option
ibm,set-slot-reset
ibm,read-slot-reset-state2
additional serialiaztion group by itself
--
stop-self
start-cpu
set-power-level
<snip>
Quoted 7 lines
Quoted 4 lines
Also, if we're going to go ahead and use
rtas_call()which locks it's own buffer which meets the requirements, why do we even need a separate buffer? Really, we should make this call, then copy the content of the buffer before handing it over to the drivers.But another CPU could
rtas_call()and blow away our buffer after we've dropped the RTAS lock but before we've used the content of the buffer.
Yeah, maybe I'm getting ahead of myself here -- to me this just highlights the whole locking problem with the API as written, since the locking is all done inside that call. The API needs to be extended such that we have the option of doing our own locking of RTAS calls.
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 );Quoted 8 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ goto out; + }Should we try to process this instead of just warning? The type we get might be one of the the ones we recognize in
ras.c; so this is an argument for combiningras.cwith this code or at least report this in the same manner we report any other RTAS error log.
Quoted 2 lines
We could, but that would be a massive firmware bug - not that it wouldn't happen, but it would be Not Our Problem TM.
Yeah, this is paranoia (*cough* Milton's suggestion)
Quoted 11 lines
Quoted 7 lines
Quoted 4 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.I think we *have* to copy it because we don't want our lock held when we call random handlers.
They're not really random, and as long as they don't call the register/unregister routines it should be /OK/. But copying is probably good so we don't hold the lock for too long.
Yeah, this is probably ok since it's all happening in interrupt context anyway the handlers have to be running in an atomic context anyway.
Signature · 1 line
Sonny Rao, LTC OzLabs, BML team
Quoted 24 lines · On Tuesday 18 May 2010 23:37:31 Michael Ellerman wrote:
Quoted 2 lines · Mark Nelson
This patch adds support for handling IO Event interrupts which come through at the /event-sources/ibm,io-events device tree node.
Hi Mark,
You'll have to explain to me offline sometime how it is we ran out of interrupts and started needing to multiplex them ..
Quoted 15 lines
There is one ibm,io-events interrupt, but this interrupt might be used for multiple I/O devices, each with their own separate driver. So, we create a platform interrupt handler that will do the RTAS check-exception call and then call the appropriate driver's interrupt handler (the one(s) that registered with a scope that matches the scope of the incoming interrupt).
So, a driver for a device that uses IO Event interrupts will register it's interrupt service routine (or interrupt handler) with the platform code using
ioei_register_isr(). This register function takes a function pointer to the driver's handler and the scope that the driver is interested in (scopes defined inarch/powerpc/include/asm/io_events.h). The driver's handler must take a pointer to a structio_events_sectionand must not return anything.
Quoted 8 lines
Quoted 4 lines
The platform code registers
io_event_interrupt()as the interrupt handler for the ibm,io-events interrupt. Upon receiving an IO Event interrupt, it checks the scope of the incoming interrupt and only calls those drivers' handlers that have registered as being interested in that scope.The "checks the scope" requires an RTAS call, which takes a global lock (and you add another) - these aren't going to be used for anything performance critical I hope?
I've been told they're not performance critical but I'll have to go back and have a closer look at the locking again - I probably am being a bit overzealous.
Quoted 17 lines
Quoted 17 lines
It is possible for a single driver to register the same function pointer more than once with different scopes if it is interested in more than one type of IO Event interrupt. If a handler wants to be notified of all incoming IO Event interrupts it can register with
IOEI_SCOPE_ANY.A driver can unregister to stop receiving the IO Event interrupts using
ioei_unregister_isr(), passing it the same function pointer to the driver's handler and the scope the driver was registered with.Signed-off-by Mark Nelson <[email protected]>--- arch/powerpc/include/asm/io_events.h | 40 +++++ arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/io_events.c | 205 +++++++++++++++++++++++++++++ 3 files changed, 246 insertions(+), 1 deletion(-)
Quoted 9 lines
arch/powerpc/include/asm/io_events.h line 2
Quoted 7 lines
Index:
upstream/arch/powerpc/include/asm/io_events.h
===================================================================arch/powerpc/include/asm/io_events.h new file +2
-0@@ -0,0 +1,40 @@ +/* +* Copyright 2010 IBM Corporation, Mark Nelson I usually have name, corp, but I'm not sure if it matters.
I'll find out what the officially sanctioned way is :)
Quoted 17 lines
Quoted 17 lines
arch/powerpc/include/asm/io_events.h new file +16
-0+* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +*/ + +#ifndef _ASM_POWERPC_IOEVENTS_H +#define _ASM_POWERPC_IOEVENTS_H + +struct io_events_section { + u16 id; // Unique section identifier x00-x01 + u16 length; // Section length (bytes) x02-x03 + u8 version; // Section Version x04-x04 + u8 sec_subtype; // Section subtype x05-x05 + u16 creator_id; // Creator Component ID x06-x07 + u8 event_type; // IO-Event Type x08-x08
Quoted 8 lines
arch/powerpc/include/asm/io_events.h line 25
Quoted 6 lines
arch/powerpc/include/asm/io_events.h new file +6
-0+u8 rpc_field_len;// PRC Field Length x09-x09 +u8 scope;// Error/Event Scope x0A-x0A +u8 event_subtype;// I/O-Event Sub-Type x0B-x0B +u32 drc_index;// DRC Index x0C-x0F +u32 rpc_data[];// RPC Data (optional) x10-... +};I know it's idiomatic in that sort of code, but C++ comments?
Yeah, I'm not too phased - I was just copying what lppaca.h did...
Quoted 16 lines
arch/powerpc/include/asm/io_events.h line 38
Quoted 13 lines
arch/powerpc/include/asm/io_events.h new file +12
-0+#define IOEI_SCOPE_NOT_APP 0x00 +#define IOEI_SCOPE_RIO_HUB 0x36 +#define IOEI_SCOPE_RIO_BRIDGE 0x37 +#define IOEI_SCOPE_PHB 0x38 +#define IOEI_SCOPE_EADS_GLOBAL 0x39 +#define IOEI_SCOPE_EADS_SLOT 0x3A +#define IOEI_SCOPE_TORRENT_HUB 0x3B +#define IOEI_SCOPE_SERVICE_PROC 0x51 +#define IOEI_SCOPE_ANY -1 + +int ioei_register_isr (void (*isr)(struct io_events_section *),int scope); +int ioei_unregister_isr (void (*isr)(struct io_events_section *),int scope);Given these are exported to the whole kernel I'd vote for
pseries_ioei_register_isr(), if I get to vote that is.
That's a very good point - I'll change that.
Quoted 43 lines
Quoted 21 lines
Index:
upstream/arch/powerpc/platforms/pseries/io_events.c
===================================================================arch/powerpc/platforms/pseries/io_events.c new file +15
-0@@ -0,0 +1,205 @@ +/* +* Copyright 2010 IBM Corporation, Mark Nelson +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +*/ + +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/interrupt.h> arch/powerpc/platforms/pseries/io_events.c line 25
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c new file +10
-0+#include <linux/of.h> + +#include <asm/io_events.h> +#include <asm/rtas.h> +#include <asm/irq.h> + +#include "event_sources.h" + +struct ioei_consumer { +void (*ioei_isr)(struct io_events_section *);Function pointers is one case where a typedef can make the code easier to read, if you like.
arch/powerpc/platforms/pseries/io_events.c line 28
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+int scope; +struct ioei_consumer *next; +};You forgot the fourth commandment:
Thou shalt not write thine own linked list implementation when there already exist several perfectly good ones in the kernel!
Quoted 1 line
Or is there some good reason for it I'm missing? :)
No, there was no good reason at all here and I do feel stupid as in a previous patch I fought to use the in kernel implementation. I'll use a struct list_head for the next version.
Quoted 15 lines
You could even use a hlist to save a void * in your list head.
Quoted 12 lines
arch/powerpc/platforms/pseries/io_events.c new file +12
-0+static int ioei_check_exception_token; + +static unsigned char ioei_log_buf[RTAS_ERROR_LOG_MAX ]; +static DEFINE_SPINLOCK (ioei_log_buf_lock); + +static struct ioei_consumer *ioei_isr_list; +static DEFINE_SPINLOCK (ioei_isr_list_lock); + +int ioei_register_isr (void (*isr)(struct io_events_section *),int scope) +{ +struct ioei_consumer *iter; +struct ioei_consumer *cons;
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 44
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+int ret =0 ; + +spin_lock (&ioei_isr_list_lock);Here and unregister you should be using
spin_lock_irq(), because you need to protect against an interrupt and you know you're not being called from an irq handler (so you don't need save/restore - though you could use it anyway to be lazy :D).
I actually had that right in an earlier version but I can't remember what possessed me to change it... I'll fix it.
Quoted 12 lines
Quoted 12 lines
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+/* check to see if we've already registered this function with +* this scope. If we have, don't register it again +*/ + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + iter = iter->next; + } + +if (iter) {
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ ret = -EEXIST ; + goto out; + } + + cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );But you don't want to kmalloc while holding the lock and with interrupts off.
I could allocate above, before taking the lock, and then if we get the case where it already exists in the list I could just free it before returning. Would that work?
Quoted 55 lines
Quoted 55 lines
arch/powerpc/platforms/pseries/io_events.c new file +54
-0+if (!cons) { + ret = -ENOMEM ; + goto out; + } + + cons->ioei_isr = isr; + cons->scope = scope; + + cons->next = ioei_isr_list; + ioei_isr_list = cons; + +out: +spin_unlock (&ioei_isr_list_lock); + +return ret; +} +EXPORT_SYMBOL_GPL (ioei_register_isr); + +int ioei_unregister_isr (void (*isr)(struct io_events_section *),int scope) +{ +struct ioei_consumer *iter; +struct ioei_consumer *prev =NULL ; +int ret =0 ; + +spin_lock (&ioei_isr_list_lock); + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + prev = iter; + iter = iter->next; + } + +if (!iter) { + ret = -ENOENT ; + goto out; + } + +if (prev) + prev->next = iter->next; +else + ioei_isr_list = iter->next; + +kfree (iter); + +out: +spin_unlock (&ioei_isr_list_lock); + +return ret; +} +EXPORT_SYMBOL_GPL (ioei_unregister_isr); + +static void ioei_call_consumers (int scope,struct io_events_section *sec) +{
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 119
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+struct ioei_consumer *iter; +unsigned long flags; + +spin_lock_irqsave (&ioei_isr_list_lock, flags);You don't need to disable interrupts, because you're being called from the interrupt handler, and it won't be called again until you're finished.
You're right. Sorry, I think I mixed up the irq saving between the register/unregister functions and this function. I'll fix it.
Quoted 21 lines
Quoted 21 lines
arch/powerpc/platforms/pseries/io_events.c new file +20
-0+ iter = ioei_isr_list; +while (iter) { +if (iter->scope == scope || iter->scope ==IOEI_SCOPE_ANY ) + iter->ioei_isr (sec); + iter = iter->next; + } + +spin_unlock_irqrestore (&ioei_isr_list_lock, flags); +} + +#define EXT_INT_VECTOR_OFFSET 0x500 +#define RTAS_TYPE_IO_EVENT 0xE1 + +static irqreturn_t io_event_interrupt (int irq,void *dev_id) +{ +struct rtas_error_log *rtas_elog; +struct io_events_section *ioei_sec; +char *ch_ptr; +int status; +u16 *sec_len;
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 145
Quoted 6 lines
arch/powerpc/platforms/pseries/io_events.c new file +6
-0+ +spin_lock (&ioei_log_buf_lock); + + status = rtas_call(ioei_check_exception_token, 6, 1, NULL, + EXT_INT_VECTOR_OFFSET, + irq_map[irq].hwirq,This is going to be slow anyway, you may as well use
virq_to_hw().
Oh yeah, good idea
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c line 146
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ RTAS_IO_EVENTS, 1 /*Time Critical */,Missing space before the T ^
Nice catch!
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c line 147
Quoted 2 lines
arch/powerpc/platforms/pseries/io_events.c new file +1
-0+ __pa(&ioei_log_buf),Does the buffer need to be aligned, and/or inside the RMO? I'd guess yes.
Good question, I'll look into it
Quoted 15 lines
arch/powerpc/platforms/pseries/io_events.c line 158
Quoted 12 lines
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+ rtas_get_error_log_max()); + + rtas_elog = (struct rtas_error_log *)ioei_log_buf; + +if (status !=0 ) + goto out; + +/* We assume that we will only ever get called for io-event +* interrupts. But if we get called with something else +* make some noise about it. +*/ That would mean we'd requested the wrong interrupt wouldn't it? I'd almost BUG, but benh always bitches that I do that too often so .. :)
Yeah, I don't think this would ever happen so I'm not sure exactly what I'm protecting against here...
Quoted 15 lines
arch/powerpc/platforms/pseries/io_events.c line 170
Quoted 13 lines
arch/powerpc/platforms/pseries/io_events.c new file +12
-0+if (rtas_elog->type !=RTAS_TYPE_IO_EVENT ) { +pr_warning ("IO Events: We got called with an event type of %d" +" rather than %d!\n" , rtas_elog->type, +RTAS_TYPE_IO_EVENT ); +WARN_ON (1 ); + goto out; + } + +/* there are 24 bytes of event log data before the first section +* (Main-A) begins +*/ + ch_ptr = (char *)ioei_log_buf +24 ;Any reason you're casting from unsigned char to char?
None that I can fathom now... Good catch :)
Quoted 11 lines
arch/powerpc/platforms/pseries/io_events.c line 178
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+/* loop through all the sections until we get to the IO Events +* Section, with section ID "IE" +*/ +while (*ch_ptr !='I' && *(ch_ptr +1 ) !='E' ) { + sec_len = (u16 *)(ch_ptr +2 ); + ch_ptr += *sec_len; + }This would be neater if you cast to
io_events_sectionand used the fields I think.
That's a good idea and would be a lot nicer than the code above.
Quoted 3 lines
And even better if you know the length will be a multiple of the
section_headersize, you can do the arithmetic in those terms.
I'll read the docs again and see if we can do that.
Quoted 6 lines
arch/powerpc/platforms/pseries/io_events.c line 182
Quoted 4 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+ ioei_sec = (struct io_events_section *)ch_ptr; + +ioei_call_consumers (ioei_sec->scope, ioei_sec);Guaranteed to be only one section returned to us per call?
My understanding is that there's only ever one, but I'll double check.
Quoted 5 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.
Good point - I'll update it so that we do the copy.
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c line 190
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+out: +spin_unlock (&ioei_log_buf_lock); + +return IRQ_HANDLED ; +} + +static int __init init_ioei_IRQ (void )Never understood why IRQ always (sometimes) gets caps ..
Hmmm... Just following the pattern from the RAS code...
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c line 194
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +4
-0+{ +struct device_node *np; + + ioei_check_exception_token =rtas_token ("check-exception" );Meep, need to check if it actually exists.
Good catch!
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c line 197
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +2
-0+ np =of_find_node_by_path ("/event-sources/ibm,io-events" ); +if (np !=NULL ) {if (np) would usually do it
Definitely. I'll update.
Quoted 10 lines
arch/powerpc/platforms/pseries/io_events.c line 204
Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+request_event_sources_irqs (np, io_event_interrupt,"IO_EVENT" ); +of_node_put (np); + } + +return 0 ; +} +device_initcall (init_ioei_IRQ);Should probably be a
machine_initcall().
I'll change it to machine_device_initcall?
Quoted 7 lines
Quoted 7 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +0
-0@@ -8,7 +8,7 @@ endif
Quoted 6 lines
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 4 lines
arch/powerpc/platforms/pseries/Makefile +1
-1obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.oThe BML guys might appreciate an option to turn it off?
I initially had an option that gets selected by PPC_PSERIES, how about that?
Thanks for going through this!
Mark
Quoted 24 lines · Mark Nelson
Quoted 14 lines · On Tuesday 18 May 2010 23:37:31 Michael Ellerman wrote:
Quoted 11 lines · Mark Nelson
arch/powerpc/platforms/pseries/io_events.c new file +11
-0+/* check to see if we've already registered this function with +* this scope. If we have, don't register it again +*/ + iter = ioei_isr_list; +while (iter) { +if (iter->ioei_isr == isr && iter->scope == scope) +break ; + iter = iter->next; + } + +if (iter) {Quoted 8 lines
arch/powerpc/platforms/pseries/io_events.c line 60
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c new file +5
-0+ ret = -EEXIST ; + goto out; + } + + cons =kmalloc (sizeof (struct ioei_consumer ),GFP_KERNEL );But you don't want to kmalloc while holding the lock and with interrupts off.
Quoted 3 lines
I could allocate above, before taking the lock, and then if we get the case where it already exists in the list I could just free it before returning. Would that work?
Yeah I think so, optimise for the normal case where it doesn't already exist. The other option would be to take the lock, check, do the alloc, retake the lock and recheck - but that's a pain and not really worth the trouble.
Quoted 7 lines
Quoted 5 lines
arch/powerpc/platforms/pseries/io_events.c line 182
Quoted 3 lines
arch/powerpc/platforms/pseries/io_events.c new file +3
-0+ ioei_sec = (struct io_events_section *)ch_ptr; + +ioei_call_consumers (ioei_sec->scope, ioei_sec);Guaranteed to be only one section returned to us per call?
My understanding is that there's only ever one, but I'll double check.
OK good to check. Could be worth checking in the code, unless it's going to be really expensive.
Quoted 7 lines
Quoted 5 lines
We /could/ copy the
ioei_secand drop the buf lock, which would allow another interrupt to come in and start doing the RTAS call (on another cpu, and iff there are actually multiple interrupts). But we probably don't care.Good point - I'll update it so that we do the copy.
Sounds like we should. It's not such a concern to call the handlers with the lock held IMHO (Sonny raised that), as long as the handlers don't try and register/unregister themselves. But that will be pretty obvious if it happens.
Quoted 11 lines
Quoted 9 lines
arch/powerpc/platforms/pseries/io_events.c line 204
Quoted 7 lines
arch/powerpc/platforms/pseries/io_events.c new file +7
-0+request_event_sources_irqs (np, io_event_interrupt,"IO_EVENT" ); +of_node_put (np); + } + +return 0 ; +} +device_initcall (init_ioei_IRQ);Should probably be a
machine_initcall().I'll change it to
machine_device_initcall?
Yep.
Quoted 13 lines
Quoted 6 lines
Quoted 6 lines
Index: upstream/arch/powerpc/platforms/pseries/Makefile
===================================================================arch/powerpc/platforms/pseries/Makefile +0
-0@@ -8,7 +8,7 @@ endifQuoted 6 lines
arch/powerpc/platforms/pseries/Makefile endif · line 11
Quoted 4 lines
arch/powerpc/platforms/pseries/Makefile +1
-1obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o event_sources.o ras.o \ - firmware.o power.o dlpar.o + firmware.o power.o dlpar.o io_events.oThe BML guys might appreciate an option to turn it off?
Quoted 2 lines
I initially had an option that gets selected by
PPC_PSERIES, how about that?
Select is not great because it disregards dependencies, and BML is PSERIES. Probably just have an option that depends on PSERIES and is default y.
cheers