ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
Subsystems (3)
PATCH v3 3/9 ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
From: Naveen Krishna <[email protected]>
This patch implements cfg_gpio function for Samsung touchscreen. And also modifies the H1940 machine respectively.
Signed-off-by Naveen Krishna Ch <[email protected]>
Signed-off-by Kukjin Kim <[email protected]>
--- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/mach-h1940.c | 1 + arch/arm/plat-s3c24xx/Kconfig | 6 +++++ arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/setup-ts.c | 34 +++++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/ts.h | 4 +++ 6 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-s3c24xx/setup-ts.c
arch/arm/mach-s3c2410/Kconfig +1 -0
@@ -76,6 +76,7 @@ config ARCH_H1940 select PM_H1940 if PM select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C2410_SETUP_TS help Say Y here if you are using the HP IPAQ H1940
arch/arm/mach-s3c2410/mach-h1940.c +1 -0
@@ -145,6 +145,7 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { .delay = 10000, .presc = 49, .oversampling_shift = 2, + .cfg_gpio = s3c24xx_ts_cfg_gpio, };/**
arch/arm/plat-s3c24xx/Kconfig +6 -0
@@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C2410_SETUP_TS if TOUCHSCREEN_S3C2410 help Base platform code for any Samsung S3C24XX device
@@ -157,4 +158,9 @@ config S3C24XX_SIMTEC_AUDIO help Add audio devices for common Simtec S3C24XX boards +config S3C2410_SETUP_TS + bool + help + Compile in platform device definition for Samsung TouchScreen. + endif
arch/arm/plat-s3c24xx/Makefile +1 -0
@@ -37,6 +37,7 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o +obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o # SPI gpio central GPIO functions
arch/arm/plat-s3c24xx/setup-ts.c new file +34 -0
@@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s3c24xx/setup-ts.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* Based on S3C24XX setup for i2c device +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +struct platform_device ;/* don't need the contents */ + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +/** +* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems +* +* Configure the GPIO for the S3C2410 system, where we have external FETs +* connected to the device (later systems such as the S3C2440 integrate +* these into the device). +*/ +void s3c24xx_ts_cfg_gpio (struct platform_device *dev) +{ +s3c2410_gpio_cfgpin (S3C2410_GPG (12 ),S3C2410_GPG12_XMON ); +s3c2410_gpio_cfgpin (S3C2410_GPG (13 ), S3C2410_GPG13_nXPON); +s3c2410_gpio_cfgpin (S3C2410_GPG (14 ),S3C2410_GPG14_YMON ); +s3c2410_gpio_cfgpin (S3C2410_GPG (15 ), S3C2410_GPG15_nYPON); +}
arch/arm/plat-samsung/include/plat/ts.h +4 -0
@@ -14,8 +14,12 @@ struct s3c2410_ts_mach_info {int delay;int presc;int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); };extern void s3c24xx_ts_set_platdata (struct s3c2410_ts_mach_info *); +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio (struct platform_device *dev); +#endif /* __ASM_ARM_TS_H */
Signature · 1 line
1.6.2.5
PATCH v3 3/9 ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
Quoted 46 lines · Kukjin Kim
From: Naveen Krishna <[email protected]>
This patch implements
cfg_gpiofunction for Samsung touchscreen. And also modifies the H1940 machine respectively.Signed-off-by Naveen Krishna Ch <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/mach-h1940.c | 1 + arch/arm/plat-s3c24xx/Kconfig | 6 +++++ arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/setup-ts.c | 34 +++++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/ts.h | 4 +++ 6 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-s3c24xx/setup-ts.carch/arm/mach-s3c2410/Kconfig +1
-0@@ -76,6 +76,7 @@ config ARCH_H1940 select PM_H1940 if PM select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C2410_SETUP_TS help Say Y here if you are using the HP IPAQ H1940arch/arm/mach-s3c2410/mach-h1940.c +1
-0@@ -145,6 +145,7 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { .delay = 10000, .presc = 49, .oversampling_shift = 2, + .cfg_gpio = s3c24xx_ts_cfg_gpio, };/** arch/arm/plat-s3c24xx/Kconfig +0
-0
arch/arm/plat-s3c24xx/Kconfig config PLAT_S3C24XX · line 12
Quoted 4 lines
arch/arm/plat-s3c24xx/Kconfig +1
-0@@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C2410_SETUP_TS if TOUCHSCREEN_S3C2410
this isn't needed, the only user is currently the h1940 and it is already selecting the relevant setup code.
Quoted 89 lines
arch/arm/plat-s3c24xx/Kconfig +5
-0help Base platform code for any Samsung S3C24XX device@@ -157,4 +158,9 @@ config S3C24XX_SIMTEC_AUDIO help Add audio devices for common Simtec S3C24XX boards +config S3C2410_SETUP_TS + bool + help + Compile in platform device definition for Samsung TouchScreen. + endifarch/arm/plat-s3c24xx/Makefile +1
-0@@ -37,6 +37,7 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o +obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o # SPI gpio central GPIO functionsarch/arm/plat-s3c24xx/setup-ts.c new file +34
-0@@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s3c24xx/setup-ts.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* Based on S3C24XX setup for i2c device +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +struct platform_device ;/* don't need the contents */ + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +/** +* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems +* +* Configure the GPIO for the S3C2410 system, where we have external FETs +* connected to the device (later systems such as the S3C2440 integrate +* these into the device). +*/ +void s3c24xx_ts_cfg_gpio (struct platform_device *dev) +{ +s3c2410_gpio_cfgpin (S3C2410_GPG (12 ),S3C2410_GPG12_XMON ); +s3c2410_gpio_cfgpin (S3C2410_GPG (13 ), S3C2410_GPG13_nXPON); +s3c2410_gpio_cfgpin (S3C2410_GPG (14 ),S3C2410_GPG14_YMON ); +s3c2410_gpio_cfgpin (S3C2410_GPG (15 ), S3C2410_GPG15_nYPON); +}arch/arm/plat-samsung/include/plat/ts.h +4
-0@@ -14,8 +14,12 @@ struct s3c2410_ts_mach_info {int delay;int presc;int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); };extern void s3c24xx_ts_set_platdata (struct s3c2410_ts_mach_info *); +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio (struct platform_device *dev); +#endif /* __ASM_ARM_TS_H */ Signature · 6 lines
1.6.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.