Skip to contentSkip to conversation

ARM: S3C64XX: Adds Touchscreen support for S3C64XX

PATCH New Kukjin Kim 2 participants 2 messages May 18, 2010 – May 19, 2010

Subsystems (3)
lore
Share & tools
lore

Kukjin Kim

author
#0 lore raw

PATCH v3 6/9 ARM: S3C64XX: Adds Touchscreen support for S3C64XX

From: Naveen Krishna <[email protected]>

This patch adds touchscreen support for S3C64XX.

---
 arch/arm/mach-s3c64xx/Kconfig         |    1 +
 arch/arm/mach-s3c64xx/mach-smdk6410.c |   12 +++++++
 arch/arm/mach-s3c64xx/s3c6410.c       |    1 +
 arch/arm/plat-samsung/Kconfig         |    5 +++
 arch/arm/plat-samsung/Makefile        |    1 +
 arch/arm/plat-samsung/dev-ts.c        |   55 +++++++++++++++++++++++++++++++++
 6 files changed, 75 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-samsung/dev-ts.c
arch/arm/mach-s3c64xx/Kconfig +1 -0
index 69e9fbf..1f2f412 100644
@@ -90,6 +90,7 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C64XX_SETUP_SDHCI
arch/arm/mach-s3c64xx/mach-smdk6410.c +12 -0
index 2d5afd2..fb186c9 100644
@@ -64,6 +64,8 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -262,6 +264,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_ts,
 };
 
 #ifdef CONFIG_REGULATOR
@@ -596,6 +600,12 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
 };
 
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -625,6 +635,8 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* configure nCS1 width to 16 bits */
 
 	cs1 = __raw_readl(S3C64XX_SROM_BW) &
arch/arm/mach-s3c64xx/s3c6410.c +1 -0
index 31e53fa..4390ecb 100644
@@ -55,6 +55,7 @@ void __init s3c6410_map_io(void)
 
 	s3c_device_adc.name      = "s3c64xx-adc";
 	s3c_device_nand.name = "s3c6400-nand";
+	s3c_device_ts.name	= "s3c64xx-ts";
 }
 
 void __init s3c6410_init_clocks(int xtal)
arch/arm/plat-samsung/Kconfig +5 -0
index 641649f..b466da8 100644
@@ -196,6 +196,11 @@ config S3C64XX_DEV_SPI
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controllers.
 
+config SAMSUNG_DEV_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung Touch Screen.
+
 # DMA
 
 config S3C_DMA
arch/arm/plat-samsung/Makefile +1 -0
index 3cf30a4..695ed99 100644
@@ -41,6 +41,7 @@ obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
 obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
 obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
 
 # DMA support
 
arch/arm/plat-samsung/dev-ts.c new file +55 -0

55 lines not on this page · raw message

Signature · 1 line
1.6.2.5
#1 lore raw

PATCH v3 6/9 ARM: S3C64XX: Adds Touchscreen support for S3C64XX

Quoted 6 lines · Kukjin Kim

From: Naveen Krishna <[email protected]>

This patch adds touchscreen support for S3C64XX.

The new tree is at for-2635-2/samsung-ts without the machine support due to some problems after rebuild the trees.

Naveen/Kukjin, please have a look at this tree and update the unmerged patches.

Quoted 71 lines
---
 arch/arm/mach-s3c64xx/Kconfig         |    1 +
 arch/arm/mach-s3c64xx/mach-smdk6410.c |   12 +++++++
 arch/arm/mach-s3c64xx/s3c6410.c       |    1 +
 arch/arm/plat-samsung/Kconfig         |    5 +++
 arch/arm/plat-samsung/Makefile        |    1 +
 arch/arm/plat-samsung/dev-ts.c        |   55 +++++++++++++++++++++++++++++++++
 6 files changed, 75 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-samsung/dev-ts.c
arch/arm/mach-s3c64xx/Kconfig +1 -0
index 69e9fbf..1f2f412 100644
@@ -90,6 +90,7 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C64XX_SETUP_SDHCI
arch/arm/mach-s3c64xx/mach-smdk6410.c +12 -0
index 2d5afd2..fb186c9 100644
@@ -64,6 +64,8 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -262,6 +264,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_ts,
 };
 
 #ifdef CONFIG_REGULATOR
@@ -596,6 +600,12 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
 };
 
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -625,6 +635,8 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* configure nCS1 width to 16 bits */
 
 	cs1 = __raw_readl(S3C64XX_SROM_BW) &
arch/arm/mach-s3c64xx/s3c6410.c +0 -0
index 31e53fa..4390ecb 100644

arch/arm/mach-s3c64xx/s3c6410.c void __init s3c6410_map_io(void) · line 58

Quoted 4 lines
arch/arm/mach-s3c64xx/s3c6410.c +1 -0
@@ -55,6 +55,7 @@ void __init s3c6410_map_io(void)
 
 	s3c_device_adc.name      = "s3c64xx-adc";
 	s3c_device_nand.name = "s3c6400-nand";
+	s3c_device_ts.name	= "s3c64xx-ts";

I'm leaving the s3c_device_ts.name field as s3c64xx-ts in the device file to avoid having to rename it each time.

Quoted 99 lines
arch/arm/mach-s3c64xx/s3c6410.c +0 -0
 }
 
 void __init s3c6410_init_clocks(int xtal)
arch/arm/plat-samsung/Kconfig +5 -0
index 641649f..b466da8 100644
@@ -196,6 +196,11 @@ config S3C64XX_DEV_SPI
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controllers.
 
+config SAMSUNG_DEV_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung Touch Screen.
+
 # DMA
 
 config S3C_DMA
arch/arm/plat-samsung/Makefile +1 -0
index 3cf30a4..695ed99 100644
@@ -41,6 +41,7 @@ obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
 obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
 obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
 
 # DMA support
 
arch/arm/plat-samsung/dev-ts.c new file +55 -0
new file mode 100644
index 0000000..7571691
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-samsung/dev-ts.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *			http://www.samsung.com/
+ *			Naveen Krishna Ch <[email protected]>
+ *
+ * TouchScreen Device definition for Samsung S3C, S5P serie SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/ts.h>
+
+static struct resource s3c_ts_resource[] = {
+[0] = {
+		.start = SAMSUNG_PA_ADC,
+		.end   = SAMSUNG_PA_ADC + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_PENDN,
+		.end   = IRQ_PENDN,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "samsung-ts",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+	struct s3c2410_ts_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_ts.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for Touchscreen platform data\n");
+	}
+}
Signature · 6 lines
1.6.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signature · 5 lines
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.