ARM: S5P: Add Ext interrupt support.
Subsystems (3)
PATCH v6 1/1 ARM: S5P: Add Ext interrupt support.
From: Jongpill Lee <[email protected]>
This patch adds the following:
1. Adds external interrupt support for S5PV210.
2. Adds common defines related to external interrupt support for plat-s5p based platforms.
3. Based on the new common defines, corresponding changes are made in the affected platforms (S5P6440 and S5P6442).
--- arch/arm/mach-s5p6440/include/mach/irqs.h | 9 +- arch/arm/mach-s5p6442/include/mach/irqs.h | 5 +- arch/arm/mach-s5pv210/Kconfig | 1 + arch/arm/mach-s5pv210/include/mach/irqs.h | 25 +--- arch/arm/mach-s5pv210/include/mach/memory.h | 2 +- arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 48 +++++ arch/arm/plat-s5p/Kconfig | 6 + arch/arm/plat-s5p/Makefile | 1 + arch/arm/plat-s5p/include/plat/irqs.h | 7 + arch/arm/plat-s5p/irq-eint.c | 218 ++++++++++++++++++++++++ 10 files changed, 296 insertions(+), 26 deletions(-) create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.h create mode 100644 arch/arm/plat-s5p/irq-eint.c
arch/arm/mach-s5p6440/include/mach/irqs.h +8 -1
@@ -72,7 +72,14 @@#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)#define S5P_EINT (x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT (x) S5P_EINT(x) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) +/* +* S5P6440 has 0-15 external interrupts in group 0. Only these can be used +* to wake up from sleep. If request is beyond this range by mistake, a large +* return value for an irq number should be indication of something amiss. +*/ +#define S5P_EINT_BASE2 (0xf0000000)/* * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
arch/arm/mach-s5p6442/include/mach/irqs.h +3 -2
@@ -77,8 +77,9 @@#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) -#define IRQ_EINT (x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_IRQ_EINT_BASE + (x)-16)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) +/* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT(31) + 1)
arch/arm/mach-s5pv210/Kconfig +1 -0
@@ -12,6 +12,7 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select PLAT_S5P + select S5P_EXT_INT help Enable S5PV210 CPU support
arch/arm/mach-s5pv210/include/mach/irqs.h +3 -22
@@ -17,22 +17,6 @@/* VIC0: System, DMA, Timer */ -#define IRQ_EINT0 S5P_IRQ_VIC0(0) -#define IRQ_EINT1 S5P_IRQ_VIC0(1) -#define IRQ_EINT2 S5P_IRQ_VIC0(2) -#define IRQ_EINT3 S5P_IRQ_VIC0(3) -#define IRQ_EINT4 S5P_IRQ_VIC0(4) -#define IRQ_EINT5 S5P_IRQ_VIC0(5) -#define IRQ_EINT6 S5P_IRQ_VIC0(6) -#define IRQ_EINT7 S5P_IRQ_VIC0(7) -#define IRQ_EINT8 S5P_IRQ_VIC0(8) -#define IRQ_EINT9 S5P_IRQ_VIC0(9) -#define IRQ_EINT10 S5P_IRQ_VIC0(10) -#define IRQ_EINT11 S5P_IRQ_VIC0(11) -#define IRQ_EINT12 S5P_IRQ_VIC0(12) -#define IRQ_EINT13 S5P_IRQ_VIC0(13) -#define IRQ_EINT14 S5P_IRQ_VIC0(14) -#define IRQ_EINT15 S5P_IRQ_VIC0(15)#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)#define IRQ_BATF S5P_IRQ_VIC0(17)#define IRQ_MDMA S5P_IRQ_VIC0(18)
@@ -134,13 +118,10 @@#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)#define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT (x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT (x) S5P_EINT(x) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + 1)#endif /* ASM_ARCH_IRQS_H */
arch/arm/mach-s5pv210/include/mach/memory.h +1 -1
@@ -18,6 +18,6 @@/* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 28 +#define SECTION_SIZE_BITS 30#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file +48 -0
48 lines not on this page · raw message
arch/arm/plat-s5p/Kconfig +6 -0
@@ -23,3 +23,9 @@ config PLAT_S5P select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. + +config S5P_EXT_INT + bool + help + Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440.
arch/arm/plat-s5p/Makefile +1 -0
@@ -16,4 +16,5 @@ obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o obj-y += irq.o +obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-y += setup-i2c0.o
arch/arm/plat-s5p/include/plat/irqs.h +7 -0
@@ -87,4 +87,11 @@#define IRQ_TIMER3 S5P_TIMER_IRQ(3)#define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_EINT (x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ + : ((x) - 16 + S5P_EINT_BASE2)) + +#define EINT_OFFSET (irq) ((irq) < S5P_EINT_BASE2 ? \ + ((irq) - S5P_EINT_BASE1) : \ + ((irq) + 16 - S5P_EINT_BASE2)) +#endif /* __ASM_PLAT_S5P_IRQS_H */
arch/arm/plat-s5p/irq-eint.c new file +218 -0
218 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH v6 1/1 ARM: S5P: Add Ext interrupt support.
Quoted 125 lines · Kukjin Kim
From: Jongpill Lee <[email protected]>
This patch adds the following:
1. Adds external interrupt support for S5PV210.
2. Adds common defines related to external interrupt support for plat-s5p based platforms.
3. Based on the new common defines, corresponding changes are made in the affected platforms (S5P6440 and S5P6442).Signed-off-by Jongpill Lee <[email protected]>Signed-off-by Pannaga Bhushan <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s5p6440/include/mach/irqs.h | 9 +- arch/arm/mach-s5p6442/include/mach/irqs.h | 5 +- arch/arm/mach-s5pv210/Kconfig | 1 + arch/arm/mach-s5pv210/include/mach/irqs.h | 25 +--- arch/arm/mach-s5pv210/include/mach/memory.h | 2 +- arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 48 +++++ arch/arm/plat-s5p/Kconfig | 6 + arch/arm/plat-s5p/Makefile | 1 + arch/arm/plat-s5p/include/plat/irqs.h | 7 + arch/arm/plat-s5p/irq-eint.c | 218 ++++++++++++++++++++++++ 10 files changed, 296 insertions(+), 26 deletions(-) create mode 100644 arch/arm/mach-s5pv210/include/mach/regs-gpio.h create mode 100644 arch/arm/plat-s5p/irq-eint.carch/arm/mach-s5p6440/include/mach/irqs.h +8
-1@@ -72,7 +72,14 @@#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)#define S5P_EINT (x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT (x) S5P_EINT(x) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) +/* +* S5P6440 has 0-15 external interrupts in group 0. Only these can be used +* to wake up from sleep. If request is beyond this range by mistake, a large +* return value for an irq number should be indication of something amiss. +*/ +#define S5P_EINT_BASE2 (0xf0000000)/* * Next the external interrupt groups. These are similar to the IRQ_EINT(x) arch/arm/mach-s5p6442/include/mach/irqs.h +3
-2@@ -77,8 +77,9 @@#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) -#define IRQ_EINT (x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_IRQ_EINT_BASE + (x)-16)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) +/* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT(31) + 1)arch/arm/mach-s5pv210/Kconfig +1
-0@@ -12,6 +12,7 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select PLAT_S5P + select S5P_EXT_INT help Enable S5PV210 CPU supportarch/arm/mach-s5pv210/include/mach/irqs.h +3
-22@@ -17,22 +17,6 @@/* VIC0: System, DMA, Timer */ -#define IRQ_EINT0 S5P_IRQ_VIC0(0) -#define IRQ_EINT1 S5P_IRQ_VIC0(1) -#define IRQ_EINT2 S5P_IRQ_VIC0(2) -#define IRQ_EINT3 S5P_IRQ_VIC0(3) -#define IRQ_EINT4 S5P_IRQ_VIC0(4) -#define IRQ_EINT5 S5P_IRQ_VIC0(5) -#define IRQ_EINT6 S5P_IRQ_VIC0(6) -#define IRQ_EINT7 S5P_IRQ_VIC0(7) -#define IRQ_EINT8 S5P_IRQ_VIC0(8) -#define IRQ_EINT9 S5P_IRQ_VIC0(9) -#define IRQ_EINT10 S5P_IRQ_VIC0(10) -#define IRQ_EINT11 S5P_IRQ_VIC0(11) -#define IRQ_EINT12 S5P_IRQ_VIC0(12) -#define IRQ_EINT13 S5P_IRQ_VIC0(13) -#define IRQ_EINT14 S5P_IRQ_VIC0(14) -#define IRQ_EINT15 S5P_IRQ_VIC0(15)#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)#define IRQ_BATF S5P_IRQ_VIC0(17)#define IRQ_MDMA S5P_IRQ_VIC0(18)@@ -134,13 +118,10 @@#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)#define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT (x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT (x) S5P_EINT(x) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + 1)#endif /* ASM_ARCH_IRQS_H */ arch/arm/mach-s5pv210/include/mach/memory.h +0
-0
arch/arm/mach-s5pv210/include/mach/memory.h line 23
Quoted 7 lines
arch/arm/mach-s5pv210/include/mach/memory.h +1
-1@@ -18,6 +18,6 @@/* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 28 +#define SECTION_SIZE_BITS 30#endif /* __ASM_ARCH_MEMORY_H */
oops... seems to have snuck in here by acident.
Quoted 325 lines
arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file +48
-0@@ -0,0 +1,48 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com +* +* S5PV210 - GPIO (including EINT) register definitions +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON (x) (S5PV210_EINT30CON + ((x) * 0x4)) + +#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON (x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4)) + +#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK (x) (S5PV210_EINT30MASK + ((x) * 0x4)) + +#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND (x) (S5PV210_EINT30PEND + ((x) * 0x4)) + +#define EINT_REG_NR (x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit (irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0 (x) S5PV210_GPH0(x) +#define EINT_GPIO_1 (x) S5PV210_GPH1(x) +#define EINT_GPIO_2 (x) S5PV210_GPH2(x) +#define EINT_GPIO_3 (x) S5PV210_GPH3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ arch/arm/plat-s5p/Kconfig +6
-0@@ -23,3 +23,9 @@ config PLAT_S5P select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. + +config S5P_EXT_INT + bool + help + Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440.arch/arm/plat-s5p/Makefile +1
-0@@ -16,4 +16,5 @@ obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o obj-y += irq.o +obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-y += setup-i2c0.oarch/arm/plat-s5p/include/plat/irqs.h +7
-0@@ -87,4 +87,11 @@#define IRQ_TIMER3 S5P_TIMER_IRQ(3)#define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_EINT (x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ + : ((x) - 16 + S5P_EINT_BASE2)) + +#define EINT_OFFSET (irq) ((irq) < S5P_EINT_BASE2 ? \ + ((irq) - S5P_EINT_BASE1) : \ + ((irq) + 16 - S5P_EINT_BASE2)) +#endif /* __ASM_PLAT_S5P_IRQS_H */ arch/arm/plat-s5p/irq-eint.c new file +218
-0@@ -0,0 +1,218 @@ +/* linux/arch/arm/plat-s5p/irq-eint.c +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com +* +* S5P - IRQ EINT support +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/gpio.h> + +#include <asm/hardware/vic.h> + +#include <plat/regs-irqtype.h> + +#include <mach/map.h> +#include <plat/cpu.h> +#include <plat/pm.h> + +#include <plat/gpio-cfg.h> +#include <mach/regs-gpio.h> + +static inline void s5p_irq_eint_mask (unsigned int irq) +{ +u32 mask; + + mask =__raw_readl (S5P_EINT_MASK (EINT_REG_NR (irq))); + mask |=eint_irq_to_bit (irq); +__raw_writel (mask,S5P_EINT_MASK (EINT_REG_NR (irq))); +} + +static void s5p_irq_eint_unmask (unsigned int irq) +{ +u32 mask; + + mask =__raw_readl (S5P_EINT_MASK (EINT_REG_NR (irq))); + mask &= ~(eint_irq_to_bit (irq)); +__raw_writel (mask,S5P_EINT_MASK (EINT_REG_NR (irq))); +} + +static inline void s5p_irq_eint_ack (unsigned int irq) +{ +__raw_writel (eint_irq_to_bit (irq),S5P_EINT_PEND (EINT_REG_NR (irq))); +} + +static void s5p_irq_eint_maskack (unsigned int irq) +{ +/* compiler should in-line these */ +s5p_irq_eint_mask (irq); +s5p_irq_eint_ack (irq); +} + +static int s5p_irq_eint_set_type (unsigned int irq,unsigned int type) +{ +int offs =EINT_OFFSET (irq); +int shift; +u32 ctrl, mask; +u32 newvalue =0 ; + +switch (type) { +case IRQ_TYPE_EDGE_RISING : + newvalue =S5P_EXTINT_RISEEDGE ; +break ; + +case IRQ_TYPE_EDGE_FALLING : + newvalue =S5P_EXTINT_RISEEDGE ; +break ; + +case IRQ_TYPE_EDGE_BOTH : + newvalue =S5P_EXTINT_BOTHEDGE ; +break ; + +case IRQ_TYPE_LEVEL_LOW : + newvalue =S5P_EXTINT_LOWLEV ; +break ; + +case IRQ_TYPE_LEVEL_HIGH : + newvalue =S5P_EXTINT_HILEV ; +break ; + +default : +printk (KERN_ERR "No such irq type %d" , type); +return -EINVAL ; + } + + shift = (offs &0x7 ) *4 ; + mask =0x7 << shift; + + ctrl =__raw_readl (S5P_EINT_CON (EINT_REG_NR (irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; +__raw_writel (ctrl,S5P_EINT_CON (EINT_REG_NR (irq))); + +if ((0 <= offs) && (offs <8 )) +s3c_gpio_cfgpin (EINT_GPIO_0 (offs &0x7 ),EINT_MODE ); + +else if ((8 <= offs) && (offs <16 )) +s3c_gpio_cfgpin (EINT_GPIO_1 (offs &0x7 ),EINT_MODE ); + +else if ((16 <= offs) && (offs <24 )) +s3c_gpio_cfgpin (EINT_GPIO_2 (offs &0x7 ),EINT_MODE ); + +else if ((24 <= offs) && (offs <32 )) +s3c_gpio_cfgpin (EINT_GPIO_3 (offs &0x7 ),EINT_MODE ); + +else +printk (KERN_ERR "No such irq number %d" , offs); + +return 0 ; +} + +static struct irq_chip s5p_irq_eint = { + .name ="s5p-eint" , + .mask = s5p_irq_eint_mask, + .unmask = s5p_irq_eint_unmask, + .mask_ack = s5p_irq_eint_maskack, + .ack = s5p_irq_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +/* s5p_irq_demux_eint +* +* This function demuxes the IRQ from the group0 external interrupts, +* from EINTs 16 to 31. It is designed to be inlined into the specific +* handler s5p_irq_demux_eintX_Y. +* +* Each EINT pend/mask registers handle eight of them. +*/ +static inline void s5p_irq_demux_eint (unsigned int start) +{ +u32 status =__raw_readl (S5P_EINT_PEND (EINT_REG_NR (start))); +u32 mask =__raw_readl (S5P_EINT_MASK (EINT_REG_NR (start))); +unsigned int irq; + + status &= ~mask; + status &=0xff ; + +while (status) { + irq =fls (status) -1 ; +generic_handle_irq (irq + start); + status &= ~(1 << irq); + } +} + +static void s5p_irq_demux_eint16_31 (unsigned int irq,struct irq_desc *desc) +{ +s5p_irq_demux_eint (IRQ_EINT (16 )); +s5p_irq_demux_eint (IRQ_EINT (24 )); +} + +static inline void s5p_irq_vic_eint_mask (unsigned int irq) +{ +void __iomem *base =get_irq_chip_data (irq); + +s5p_irq_eint_mask (irq); +writel (1 <<EINT_OFFSET (irq), base +VIC_INT_ENABLE_CLEAR ); +} + +static void s5p_irq_vic_eint_unmask (unsigned int irq) +{ +void __iomem *base =get_irq_chip_data (irq); + +s5p_irq_eint_unmask (irq); +writel (1 <<EINT_OFFSET (irq), base +VIC_INT_ENABLE ); +} + +static inline void s5p_irq_vic_eint_ack (unsigned int irq) +{ +__raw_writel (eint_irq_to_bit (irq),S5P_EINT_PEND (EINT_REG_NR (irq))); +} + +static void s5p_irq_vic_eint_maskack (unsigned int irq) +{ +s5p_irq_vic_eint_mask (irq); +s5p_irq_vic_eint_ack (irq); +} + +static struct irq_chip s5p_irq_vic_eint = { + .name ="s5p_vic_eint" , + .mask = s5p_irq_vic_eint_mask, + .unmask = s5p_irq_vic_eint_unmask, + .mask_ack = s5p_irq_vic_eint_maskack, + .ack = s5p_irq_vic_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +int __init s5p_init_irq_eint (void ) +{ +int irq; + +for (irq =IRQ_EINT (0 ); irq <=IRQ_EINT (15 ); irq++) +set_irq_chip (irq, &s5p_irq_vic_eint); + +for (irq =IRQ_EINT (16 ); irq <=IRQ_EINT (31 ); irq++) { +set_irq_chip (irq, &s5p_irq_eint); +set_irq_handler (irq, handle_level_irq); +set_irq_flags (irq,IRQF_VALID ); + } + +set_irq_chained_handler (IRQ_EINT16_31 , s5p_irq_demux_eint16_31); +return 0 ; +} + +arch_initcall (s5p_init_irq_eint);Signature · 6 lines
1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.
PATCH v6 1/1 ARM: S5P: Add Ext interrupt support.
In reply to Kukjin KimHello,
Quoted 26 lines · Kukjin Kim
From: Jongpill Lee <[email protected]>
This patch adds the following:
1. Adds external interrupt support for S5PV210.
2. Adds common defines related to external interrupt support for plat-s5p based platforms.
3. Based on the new common defines, corresponding changes are made in the affected platforms (S5P6440 and S5P6442).Signed-off-by Jongpill Lee <[email protected]>Signed-off-by Pannaga Bhushan <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- arch/arm/mach-s5p6440/include/mach/irqs.h | 9 +- arch/arm/mach-s5p6442/include/mach/irqs.h | 5 +- arch/arm/mach-s5pv210/Kconfig | 1 + arch/arm/mach-s5pv210/include/mach/irqs.h | 25 +--- arch/arm/mach-s5pv210/include/mach/memory.h | 2 +- arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 48 +++++ arch/arm/plat-s5p/Kconfig | 6 + arch/arm/plat-s5p/Makefile | 1 + arch/arm/plat-s5p/include/plat/irqs.h | 7 + arch/arm/plat-s5p/irq-eint.c | 218 ++++++++++++++++++++++++ 10 files changed, 296 insertions(+), 26 deletions(-)
Quoted 1 line
...
Works fine here on S5PC100. I will post relevant patches for s5pc100 in a minute.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center