Add Watchdog support for Samsung SMDK6410, S5P6440 and S5Pv210
cover Add Watchdog support for Samsung SMDK6410, S5P6440 and S5Pv210
This patches add Watchdog support for SMDK6410, S5P6440 and S5PV210.
- Add HAVE_S3C2410_WATCHDOG for selecting watchgog driver compile in each machine
- Add S3C_DEV_WDT for watchdog device definitions
- Fix freeing memory part when memory region could not be allocated s3c2410_wdt
- Add machine dependent part for watchdog support
[PATCH 1/5] ARM: SAMSUNG: Move WDT device definitions in plat-samsung
[PATCH 2/5] [WATCHDOG] s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated [PATCH 3/5] ARM: SMDK6410: Add Watchdog support for SMDK6410
[PATCH 4/5] ARM: S5P6440: Add Watchdog support for S5P6440
[PATCH 5/5] ARM: S5PV210: Add Watchdog support for S5PV210
PATCH 1/5 ARM: SAMSUNG: Move WDT device definitions in plat-samsung
From: Banajit Goswami <[email protected]>
This patch moves the definitions of watchdog timer device from plat-s3c24xx to plat-samsung. This will enable all Samsung S3C and S5P series SoC's to use common WDT device definition.
And adds HAVE_S3C2410_WATCHDOG for selecting in each machine without modifying Kconfig in drivers directory.
--- arch/arm/Kconfig | 1 + arch/arm/mach-s3c2410/include/mach/map.h | 1 + arch/arm/plat-s3c24xx/devs.c | 26 ------------------- arch/arm/plat-samsung/Kconfig | 6 ++++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-wdt.c | 40 ++++++++++++++++++++++++++++++ drivers/watchdog/Kconfig | 10 ++++--- 7 files changed, 55 insertions(+), 30 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-wdt.c
arch/arm/Kconfig +1 -0
@@ -651,6 +651,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select HAVE_S3C2410_WATCHDOG help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
arch/arm/mach-s3c2410/include/mach/map.h +1 -0
@@ -111,6 +111,7 @@#define S3C_PA_USBHOST S3C2410_PA_USBHOST#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 +#define S3C_PA_WDT S3C2410_PA_WATCHDOG#define S3C_PA_NAND S3C24XX_PA_NAND#endif /* __ASM_ARCH_MAP_H */
arch/arm/plat-s3c24xx/devs.c +0 -26
@@ -234,32 +234,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) } } - -/* Watchdog */ - -static struct resource s3c_wdt_resource[] = { - [0 ] = { - .start =S3C24XX_PA_WATCHDOG , - .end =S3C24XX_PA_WATCHDOG +S3C24XX_SZ_WATCHDOG -1 , - .flags =IORESOURCE_MEM , - }, - [1 ] = { - .start =IRQ_WDT , - .end =IRQ_WDT , - .flags =IORESOURCE_IRQ , - } - -}; - -struct platform_device s3c_device_wdt = { - .name ="s3c2410-wdt" , - .id =-1 , - .num_resources =ARRAY_SIZE (s3c_wdt_resource), - .resource = s3c_wdt_resource, -}; - -EXPORT_SYMBOL (s3c_device_wdt); -/* IIS */ static struct resource s3c_iis_resource[] = {
arch/arm/plat-samsung/Kconfig +6 -0
@@ -185,6 +185,12 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG +config S3C_DEV_WDT + bool + default y if ARCH_S3C2410 + help + Complie in platform device definition for Watchdog Timer + config S3C_DEV_NAND bool help
arch/arm/plat-samsung/Makefile +1 -0
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o # DMA support
arch/arm/plat-samsung/dev-wdt.c new file +40 -0
@@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-samsung/dev-wdt.c +* +* Copyright (c) 2004 Simtec Electronics +* Ben Dooks <[email protected]> +* +* S3C series device definition for the watchdog timer +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_wdt_resource[] = { + [0 ] = { + .start =S3C_PA_WDT , + .end =S3C_PA_WDT +SZ_1M -1 , + .flags =IORESOURCE_MEM , + }, + [1 ] = { + .start =IRQ_WDT , + .end =IRQ_WDT , + .flags =IORESOURCE_IRQ , + } +}; + +struct platform_device s3c_device_wdt = { + .name ="s3c2410-wdt" , + .id =-1 , + .num_resources =ARRAY_SIZE (s3c_wdt_resource), + .resource = s3c_wdt_resource, +}; +EXPORT_SYMBOL (s3c_device_wdt);
drivers/watchdog/Kconfig +6 -4
@@ -145,13 +145,15 @@ config KS8695_WATCHDOG Watchdog timer embedded into KS8695 processor. This will reboot your system when the timeout is reached. +config HAVE_S3C2410_WATCHDOG + bool + config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on ARCH_S3C2410 + depends on HAVE_S3C2410_WATCHDOG help - Watchdog timer block in the Samsung S3C2410 chips. This will - reboot the system when the timer expires with the watchdog - enabled. + Watchdog timer block in the Samsung SoCs. This will reboot + the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLK signal, so with reasonably fast systems (PCLK around 50-66MHz)
Signature · 1 line
1.6.2.5
PATCH 1/5 ARM: SAMSUNG: Move WDT device definitions in plat-samsung
Quoted 11 lines · Kukjin Kim
From: Banajit Goswami <[email protected]>
This patch moves the definitions of watchdog timer device from plat-s3c24xx to plat-samsung. This will enable all Samsung S3C and S5P series SoC's to use common WDT device definition.
And adds
HAVE_S3C2410_WATCHDOGfor selecting in each machine without modifyingKconfigin drivers directory.Signed-off-by Banajit Goswami <[email protected]>Signed-off-by Kukjin Kim <[email protected]>
Quoted 8 lines
--- arch/arm/Kconfig | 1 + arch/arm/mach-s3c2410/include/mach/map.h | 1 + arch/arm/plat-s3c24xx/devs.c | 26 ------------------- arch/arm/plat-samsung/Kconfig | 6 ++++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-wdt.c | 40 ++++++++++++++++++++++++++++++ drivers/watchdog/Kconfig | 10 ++++---
actually, please split into drivers/watchdog/Kconfig and the rest. it would make it easier and avoid a nasty crioss-tree merge.
Quoted 144 lines
7 files changed, 55 insertions(+), 30 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-wdt.carch/arm/Kconfig +1
-0@@ -651,6 +651,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select HAVE_S3C2410_WATCHDOG help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 orarch/arm/mach-s3c2410/include/mach/map.h +1
-0@@ -111,6 +111,7 @@#define S3C_PA_USBHOST S3C2410_PA_USBHOST#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 +#define S3C_PA_WDT S3C2410_PA_WATCHDOG#define S3C_PA_NAND S3C24XX_PA_NAND#endif /* __ASM_ARCH_MAP_H */ arch/arm/plat-s3c24xx/devs.c +0
-26@@ -234,32 +234,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) } } - -/* Watchdog */ - -static struct resource s3c_wdt_resource[] = { - [0 ] = { - .start =S3C24XX_PA_WATCHDOG , - .end =S3C24XX_PA_WATCHDOG +S3C24XX_SZ_WATCHDOG -1 , - .flags =IORESOURCE_MEM , - }, - [1 ] = { - .start =IRQ_WDT , - .end =IRQ_WDT , - .flags =IORESOURCE_IRQ , - } - -}; - -struct platform_device s3c_device_wdt = { - .name ="s3c2410-wdt" , - .id =-1 , - .num_resources =ARRAY_SIZE (s3c_wdt_resource), - .resource = s3c_wdt_resource, -}; - -EXPORT_SYMBOL (s3c_device_wdt); -/* IIS */ static struct resource s3c_iis_resource[] = {arch/arm/plat-samsung/Kconfig +6
-0@@ -185,6 +185,12 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG +config S3C_DEV_WDT + bool + default y if ARCH_S3C2410 + help + Complie in platform device definition for Watchdog Timer + config S3C_DEV_NAND bool helparch/arm/plat-samsung/Makefile +1
-0@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o # DMA supportarch/arm/plat-samsung/dev-wdt.c new file +40
-0@@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-samsung/dev-wdt.c +* +* Copyright (c) 2004 Simtec Electronics +* Ben Dooks <[email protected]> +* +* S3C series device definition for the watchdog timer +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_wdt_resource[] = { + [0 ] = { + .start =S3C_PA_WDT , + .end =S3C_PA_WDT +SZ_1M -1 , + .flags =IORESOURCE_MEM , + }, + [1 ] = { + .start =IRQ_WDT , + .end =IRQ_WDT , + .flags =IORESOURCE_IRQ , + } +}; + +struct platform_device s3c_device_wdt = { + .name ="s3c2410-wdt" , + .id =-1 , + .num_resources =ARRAY_SIZE (s3c_wdt_resource), + .resource = s3c_wdt_resource, +}; +EXPORT_SYMBOL (s3c_device_wdt);drivers/watchdog/Kconfig +0
-0
drivers/watchdog/Kconfig config KS8695_WATCHDOG · line 150
Quoted 6 lines
drivers/watchdog/Kconfig +3
-0@@ -145,13 +145,15 @@ config KS8695_WATCHDOG Watchdog timer embedded into KS8695 processor. This will reboot your system when the timeout is reached. +config HAVE_S3C2410_WATCHDOG + bool +
a basic helptext here would be nice.
drivers/watchdog/Kconfig config KS8695_WATCHDOG · line 153
Quoted 4 lines
drivers/watchdog/Kconfig +1
-1config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on ARCH_S3C2410 + depends on HAVE_S3C2410_WATCHDOG
can we either leave ARCH_S3C2410 in the depends on line for the moment so if we fail to merge part of the arch/arm updates then this still keeps working.
Quoted 12 lines
drivers/watchdog/Kconfig +2
-3help - Watchdog timer block in the Samsung S3C2410 chips. This will - reboot the system when the timer expires with the watchdog - enabled. + Watchdog timer block in the Samsung SoCs. This will reboot + the system when the timer expires with the watchdog enabled. The driver is limited by the speed of the system's PCLK signal, so with reasonably fast systems (PCLK around 50-66MHz)Signature · 1 line
1.6.2.5
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.
PATCH 2/5 s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated
In reply to Kukjin KimFrom: Banajit Goswami <[email protected]>
In case the WDT device memory allocation fails, this patch modifies the driver such that, it does not try to free the memory on exit.
--- drivers/watchdog/s3c2410_wdt.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
drivers/watchdog/s3c2410_wdt.c +1 -2
@@ -426,8 +426,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) wdt_mem =request_mem_region (res->start, size, pdev->name);if (wdt_mem ==NULL ) {dev_err (dev,"failed to get memory region\n" ); - ret = -ENOENT ; - goto err_req; +return -ENOMEM ; } wdt_base =ioremap (res->start, size);
Signature · 1 line
1.6.2.5
PATCH 2/5 s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated
Hello.
Quoted 3 lines · Kukjin Kim
From: Banajit Goswami <[email protected]>
In case the WDT device memory allocation fails, this patch modifies the
This is not memory allocation.
Quoted 13 lines
driver such that, it does not try to free the memory on exit.
Signed-off-by Banajit Goswami <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- drivers/watchdog/s3c2410_wdt.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)drivers/watchdog/s3c2410_wdt.c +0
-0
drivers/watchdog/s3c2410_wdt.c static int __devinit s3c2410wdt_probe(struct platform_device *pdev) · line 429
Quoted 6 lines
drivers/watchdog/s3c2410_wdt.c +1
-2@@ -426,8 +426,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) wdt_mem =request_mem_region (res->start, size, pdev->name);if (wdt_mem ==NULL ) {dev_err (dev,"failed to get memory region\n" ); - ret = -ENOENT ; - goto err_req; +return -ENOMEM ;
It should be EBUSY actually...
WBR, Sergei
PATCH 2/5 s3c2410_wdt - Avoid freeing memory, if memory region could not be allocated
Quoted 10 lines · Sergei Shtylyov
Hello.
Quoted 3 lines · Kukjin Kim
From: Banajit Goswami <[email protected]>
In case the WDT device memory allocation fails, this patch modifies the
This is not memory allocation.
Ok, will fix it.
Quoted 10 lines
Review
Quoted 10 lines
driver such that, it does not try to free the memory on exit.
Signed-off-by Banajit Goswami <[email protected]>Signed-off-by Kukjin Kim <[email protected]>--- drivers/watchdog/s3c2410_wdt.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/drivers/watchdog/s3c2410_wdt.c
Quoted 5 lines
drivers/watchdog/s3c2410_wdt.c static int __devinit s3c2410wdt_probe(struct
Quoted 4 lines
index e4cebef..d421258 100644
drivers/watchdog/s3c2410_wdt.c +0
-0@@ -426,8 +426,7 @@ static int __devinit s3c2410wdt_probe(struct
platform_device*pdev)
Quoted 8 lines
drivers/watchdog/s3c2410_wdt.c static int __devinit s3c2410wdt_probe(struct platform_device *pdev) · line 429
Quoted 6 lines
drivers/watchdog/s3c2410_wdt.c +1
-2wdt_mem =request_mem_region (res->start, size, pdev->name);if (wdt_mem ==NULL ) {dev_err (dev,"failed to get memory region\n" ); - ret = -ENOENT ; - goto err_req; +return -ENOMEM ;It should be EBUSY actually...
Ok, will fix it.
Quoted 3 lines
WBR, Sergei
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH 3/5 ARM: SMDK6410: Add Watchdog support for SMDK6410
In reply to Kukjin KimFrom: Banajit Goswami <[email protected]>
This patch adds support for Watchdog timer for Samsung S3C6410
--- arch/arm/mach-s3c64xx/Kconfig | 2 ++ arch/arm/mach-s3c64xx/include/mach/map.h | 1 + arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 + 3 files changed, 4 insertions(+), 0 deletions(-)
arch/arm/mach-s3c64xx/Kconfig +2 -0
@@ -91,6 +91,8 @@ config MACH_SMDK6410 select S3C_DEV_FB select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_FB_24BPP
arch/arm/mach-s3c64xx/include/mach/map.h +1 -0
@@ -103,5 +103,6 @@#define S3C_PA_USBHOST S3C64XX_PA_USBHOST#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY +#define S3C_PA_WDT S3C64XX_PA_WATCHDOG#endif /* __ASM_ARCH_6400_MAP_H */
arch/arm/mach-s3c64xx/mach-smdk6410.c +1 -0
@@ -264,6 +264,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { &smdk6410_lcd_powerdev, &smdk6410_smsc911x, + &s3c_device_wdt, };#ifdef CONFIG_REGULATOR
Signature · 1 line
1.6.2.5
PATCH 4/5 ARM: S5P6440: Add Watchdog support for S5P6440
In reply to Kukjin KimFrom: Banajit Goswami <[email protected]>
This patch adds support for Watchdog timer for Samsung S5P6440.
--- arch/arm/mach-s5p6440/Kconfig | 2 ++ arch/arm/mach-s5p6440/include/mach/map.h | 1 + arch/arm/mach-s5p6440/mach-smdk6440.c | 1 + 3 files changed, 4 insertions(+), 0 deletions(-)
arch/arm/mach-s5p6440/Kconfig +2 -0
@@ -15,6 +15,8 @@ config CPU_S5P6440 config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for the Samsung SMDK6440
arch/arm/mach-s5p6440/include/mach/map.h +1 -0
@@ -64,5 +64,6 @@/* compatibiltiy defines. */ #define S3C_PA_UART S5P6440_PA_UART#define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_WDT S5P6440_PA_WDT#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5p6440/mach-smdk6440.c +1 -0
@@ -84,6 +84,7 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { };static struct platform_device *smdk6440_devices[]__initdata = { + &s3c_device_wdt, };static void __init smdk6440_map_io (void )
Signature · 1 line
1.6.2.5
PATCH 5/5 ARM: S5PV210: Add Watchdog support for S5PV210
In reply to Kukjin KimFrom: Banajit Goswami <[email protected]>
This patch adds support for Watchdog timer for Samsung S5PV210.
--- arch/arm/mach-s5pv210/Kconfig | 4 ++++ arch/arm/mach-s5pv210/include/mach/map.h | 3 +++ arch/arm/mach-s5pv210/mach-smdkc110.c | 1 + arch/arm/mach-s5pv210/mach-smdkv210.c | 1 + 4 files changed, 9 insertions(+), 0 deletions(-)
arch/arm/mach-s5pv210/Kconfig +4 -0
@@ -24,6 +24,8 @@ config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKV210
@@ -31,6 +33,8 @@ config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210
arch/arm/mach-s5pv210/include/mach/map.h +3 -0
@@ -32,6 +32,8 @@#define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_WATCHDOG (0xE2700000) +#define S5PV210_PA_UART (0xE2900000)#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
@@ -61,5 +63,6 @@/* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART#define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_WDT S5PV210_PA_WATCHDOG#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5pv210/mach-smdkc110.c +1 -0
@@ -72,6 +72,7 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { };static struct platform_device *smdkc110_devices[]__initdata = { + &s3c_device_wdt, };static void __init smdkc110_map_io (void )
arch/arm/mach-s5pv210/mach-smdkv210.c +1 -0
@@ -72,6 +72,7 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { };static struct platform_device *smdkv210_devices[]__initdata = { + &s3c_device_wdt, };static void __init smdkv210_map_io (void )
Signature · 1 line
1.6.2.5
cover Add Watchdog support for Samsung SMDK6410, S5P6440 and S5Pv210
In reply to Kukjin KimQuoted 6 lines · Kukjin Kim
This patches add Watchdog support for SMDK6410, S5P6440 and S5PV210.
- Add
HAVE_S3C2410_WATCHDOGfor selecting watchgog driver compile in each machine
- AddS3C_DEV_WDTfor watchdog device definitions
- Fix freeing memory part when memory region could not be allocateds3c2410_wdt
- Add machine dependent part for watchdog support
ok, the will look at merging the device side of this. Please orward the drivers/watchdog patches to the relevant maintainer with
Quoted 9 lines
[PATCH 1/5] ARM: SAMSUNG: Move WDT device definitions in plat-samsung
[PATCH 2/5] [WATCHDOG]s3c2410_wdt- Avoid freeing memory, if memory region could not be allocated [PATCH 3/5] ARM: SMDK6410: Add Watchdog support for SMDK6410
[PATCH 4/5] ARM: S5P6440: Add Watchdog support for S5P6440
[PATCH 5/5] ARM: S5PV210: Add Watchdog support for S5PV210
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.