Skip to contentSkip to conversation

sparc64: cleanups

PATCH Applied Igor V. Kovalenko 2 participants 6 messages May 25, 2010 – May 26, 2010

lore
Share & tools
lore
#0 lore raw

cover sparc64: cleanups

- rename sun4u cpu to Ultrasparc IIi
- cleanup pci bridge map (requires openbios change)

v0->v1: split out rename of sun4u cpu to separate patch

---

Igor V. Kovalenko (2):
sparc64: rename sun4u cpu to Ultrasparc IIi
sparc64: clean up pci bridge map

 hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
 hw/sun4u.c   |    6 +++---
 2 files changed, 29 insertions(+), 26 deletions(-)
#1 lore raw

PATCH 1/2 sparc64: rename sun4u cpu to Ultrasparc IIi

From: Igor V. Kovalenko <[email protected]>

---
 hw/sun4u.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
hw/sun4u.c +1 -1
index e9a1e23..1e92900 100644
@@ -859,7 +859,7 @@ enum {
 static const struct hwdef hwdefs[] = {
     /* Sun4u generic PC-like machine */
     {
-        .default_cpu_model = "TI UltraSparc II",
+        .default_cpu_model = "TI UltraSparc IIi",
         .machine_id = sun4u_id,
         .prom_addr = 0x1fff0000000ULL,
         .console_serial_base = 0,
#2 lore raw

PATCH 2/2 sparc64: clean up pci bridge map

In reply to Igor V. Kovalenko

From: Igor V. Kovalenko <[email protected]>

- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base

---
 hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
 hw/sun4u.c   |    4 ++--
 2 files changed, 28 insertions(+), 25 deletions(-)
hw/apb_pci.c +26 -23
index 65d8ba6..b53e3c3 100644
@@ -65,7 +65,7 @@ do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
 
 typedef struct APBState {
     SysBusDevice busdev;
-    PCIHostState host_state;
+    PCIBus      *bus;
     ReadWriteHandler pci_config_handler;
     uint32_t iommu[4];
     uint32_t pci_control[16];
@@ -191,7 +191,7 @@ static void apb_pci_config_write(ReadWriteHandler *h, pcibus_t addr,
 
     val = qemu_bswap_len(val, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
-    pci_data_write(s->host_state.bus, addr, val, size);
+    pci_data_write(s->bus, addr, val, size);
 }
 
 static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
@@ -200,7 +200,7 @@ static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
     uint32_t ret;
     APBState *s = container_of(h, APBState, pci_config_handler);
 
-    ret = pci_data_read(s->host_state.bus, addr, size);
+    ret = pci_data_read(s->bus, addr, size);
     ret = qemu_bswap_len(ret, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
     return ret;
@@ -331,37 +331,37 @@ PCIBus *pci_apb_init(target_phys_addr_t special_base,
     s = sysbus_from_qdev(dev);
     /* apb_config */
     sysbus_mmio_map(s, 0, special_base);
+    /* PCI configuration space */
+    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
     /* pci_ioport */
-    sysbus_mmio_map(s, 1, special_base + 0x2000000ULL);
-    /* pci_config */
-    sysbus_mmio_map(s, 2, special_base + 0x1000000ULL);
-    /* mem_data */
-    sysbus_mmio_map(s, 3, mem_base);
+    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
     d = FROM_SYSBUS(APBState, s);
-    d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci",
+
+    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
                                          pci_apb_set_irq, pci_pbm_map_irq, d,
                                          0, 32);
-    pci_bus_set_mem_base(d->host_state.bus, mem_base);
+    pci_bus_set_mem_base(d->bus, mem_base);
 
     for (i = 0; i < 32; i++) {
         sysbus_connect_irq(s, i, pic[i]);
     }
 
-    pci_create_simple(d->host_state.bus, 0, "pbm");
+    pci_create_simple(d->bus, 0, "pbm");
+
     /* APB secondary busses */
-    *bus2 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 0),
+    *bus2 = pci_bridge_init(d->bus, PCI_DEVFN(1, 0),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 1");
     apb_pci_bridge_init(*bus2);
 
-    *bus3 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 1),
+    *bus3 = pci_bridge_init(d->bus, PCI_DEVFN(1, 1),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 2");
     apb_pci_bridge_init(*bus3);
 
-    return d->host_state.bus;
+    return d->bus;
 }
 
 static void pci_pbm_reset(DeviceState *d)
@@ -382,7 +382,7 @@ static void pci_pbm_reset(DeviceState *d)
 static int pci_pbm_init_device(SysBusDevice *dev)
 {
     APBState *s;
-    int pci_mem_data, apb_config, pci_ioport, pci_config;
+    int pci_config, apb_config, pci_ioport;
     unsigned int i;
 
     s = FROM_SYSBUS(APBState, dev);
@@ -396,20 +396,23 @@ static int pci_pbm_init_device(SysBusDevice *dev)
     /* apb_config */
     apb_config = cpu_register_io_memory(apb_config_read,
                                         apb_config_write, s);
+    /* at region 0 */
     sysbus_init_mmio(dev, 0x10000ULL, apb_config);
-    /* pci_ioport */
-    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
-                                          pci_apb_iowrite, s);
-    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
-    /* pci_config */
+
+    /* PCI configuration space */
     s->pci_config_handler.read = apb_pci_config_read;
     s->pci_config_handler.write = apb_pci_config_write;
     pci_config = cpu_register_io_memory_simple(&s->pci_config_handler);
     assert(pci_config >= 0);
+    /* at region 1 */
     sysbus_init_mmio(dev, 0x1000000ULL, pci_config);
-    /* mem_data */
-    pci_mem_data = pci_host_data_register_mmio(&s->host_state, 1);
-    sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
+
+    /* pci_ioport */
+    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
+                                        pci_apb_iowrite, s);
+    /* at region 2 */
+    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
+
     return 0;
 }
 
hw/sun4u.c +2 -2
index 1e92900..40b5f1f 100644
@@ -70,7 +70,7 @@
 #define PROM_VADDR           0x000ffd00000ULL
 #define APB_SPECIAL_BASE     0x1fe00000000ULL
 #define APB_MEM_BASE         0x1ff00000000ULL
-#define VGA_BASE             (APB_MEM_BASE + 0x400000ULL)
+#define APB_PCI_IO_BASE      (APB_SPECIAL_BASE + 0x02000000ULL)
 #define PROM_FILENAME        "openbios-sparc64"
 #define NVRAM_SIZE           0x2000
 #define MAX_IDE_BUS          2
@@ -766,7 +766,7 @@ static void sun4uv_init(ram_addr_t RAM_size,
     irq = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
     pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, irq, &pci_bus2,
                            &pci_bus3);
-    isa_mem_base = VGA_BASE;
+    isa_mem_base = APB_PCI_IO_BASE;
     pci_vga_init(pci_bus, 0, 0);
 
     // XXX Should be pci_bus3
#3 lore raw

Re: [Qemu-devel] [PATCH 2/2] sparc64: clean up pci bridge map

Quoted 6 lines · Igor V. Kovalenko

From: Igor V. Kovalenko <[email protected]>

- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base

Looks good. Could you make a separate patch from the part that depends on OpenBIOS update and another for the cleanups? I think the cleanups could be applied quickly, but the OpenBIOS PCI changes may need more consideration.

Quoted 152 lines

---
 hw/apb_pci.c |   49 ++++++++++++++++++++++++++----------------------- hw/sun4u.c   |    4 ++--

 2 files changed, 28 insertions(+), 25 deletions(-)
hw/apb_pci.c +26 -23
index 65d8ba6..b53e3c3 100644
@@ -65,7 +65,7 @@ do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
 
  typedef struct APBState {
     SysBusDevice busdev;
-    PCIHostState host_state;
+    PCIBus      *bus;
     ReadWriteHandler pci_config_handler;
     uint32_t iommu[4];
     uint32_t pci_control[16];
@@ -191,7 +191,7 @@ static void apb_pci_config_write(ReadWriteHandler *h, pcibus_t addr,
 
     val = qemu_bswap_len(val, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
-    pci_data_write(s->host_state.bus, addr, val, size);
+    pci_data_write(s->bus, addr, val, size);
  }
 
  static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
@@ -200,7 +200,7 @@ static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
     uint32_t ret;
     APBState *s = container_of(h, APBState, pci_config_handler);
 
-    ret = pci_data_read(s->host_state.bus, addr, size);
+    ret = pci_data_read(s->bus, addr, size);
     ret = qemu_bswap_len(ret, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
     return ret;
@@ -331,37 +331,37 @@ PCIBus *pci_apb_init(target_phys_addr_t special_base,
     s = sysbus_from_qdev(dev);
     /* apb_config */
     sysbus_mmio_map(s, 0, special_base);
+    /* PCI configuration space */
+    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
     /* pci_ioport */
-    sysbus_mmio_map(s, 1, special_base + 0x2000000ULL);
-    /* pci_config */
-    sysbus_mmio_map(s, 2, special_base + 0x1000000ULL);
-    /* mem_data */
-    sysbus_mmio_map(s, 3, mem_base);
+    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
     d = FROM_SYSBUS(APBState, s);
-    d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci",
+
+    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
                                          pci_apb_set_irq, pci_pbm_map_irq, d,
                                          0, 32);
-    pci_bus_set_mem_base(d->host_state.bus, mem_base);
+    pci_bus_set_mem_base(d->bus, mem_base);
 
     for (i = 0; i < 32; i++) {
         sysbus_connect_irq(s, i, pic[i]);
     }
 
-    pci_create_simple(d->host_state.bus, 0, "pbm");
+    pci_create_simple(d->bus, 0, "pbm");
+
     /* APB secondary busses */
-    *bus2 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 0),
+    *bus2 = pci_bridge_init(d->bus, PCI_DEVFN(1, 0),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 1");
     apb_pci_bridge_init(*bus2);
 
-    *bus3 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 1),
+    *bus3 = pci_bridge_init(d->bus, PCI_DEVFN(1, 1),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 2");
     apb_pci_bridge_init(*bus3);
 
-    return d->host_state.bus;
+    return d->bus;
  }
 
  static void pci_pbm_reset(DeviceState *d)
@@ -382,7 +382,7 @@ static void pci_pbm_reset(DeviceState *d)
  static int pci_pbm_init_device(SysBusDevice *dev)
  {
     APBState *s;
-    int pci_mem_data, apb_config, pci_ioport, pci_config;
+    int pci_config, apb_config, pci_ioport;
     unsigned int i;
 
     s = FROM_SYSBUS(APBState, dev);
@@ -396,20 +396,23 @@ static int pci_pbm_init_device(SysBusDevice *dev)
     /* apb_config */
     apb_config = cpu_register_io_memory(apb_config_read,
                                         apb_config_write, s);
+    /* at region 0 */
     sysbus_init_mmio(dev, 0x10000ULL, apb_config);
-    /* pci_ioport */
-    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
-                                          pci_apb_iowrite, s);
-    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
-    /* pci_config */
+
+    /* PCI configuration space */
     s->pci_config_handler.read = apb_pci_config_read;
     s->pci_config_handler.write = apb_pci_config_write;
     pci_config = cpu_register_io_memory_simple(&s->pci_config_handler);
     assert(pci_config >= 0);
+    /* at region 1 */
     sysbus_init_mmio(dev, 0x1000000ULL, pci_config);
-    /* mem_data */
-    pci_mem_data = pci_host_data_register_mmio(&s->host_state, 1);
-    sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
+
+    /* pci_ioport */
+    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
+                                        pci_apb_iowrite, s);
+    /* at region 2 */
+    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
+
     return 0;
  }
 
hw/sun4u.c +2 -2
index 1e92900..40b5f1f 100644
@@ -70,7 +70,7 @@
  #define PROM_VADDR           0x000ffd00000ULL
  #define APB_SPECIAL_BASE     0x1fe00000000ULL
  #define APB_MEM_BASE         0x1ff00000000ULL
-#define VGA_BASE             (APB_MEM_BASE + 0x400000ULL)
+#define APB_PCI_IO_BASE      (APB_SPECIAL_BASE + 0x02000000ULL)
  #define PROM_FILENAME        "openbios-sparc64"
  #define NVRAM_SIZE           0x2000
  #define MAX_IDE_BUS          2
@@ -766,7 +766,7 @@ static void sun4uv_init(ram_addr_t RAM_size,
     irq = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
     pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, irq, &pci_bus2,
                            &pci_bus3);
-    isa_mem_base = VGA_BASE;
+    isa_mem_base = APB_PCI_IO_BASE;
     pci_vga_init(pci_bus, 0, 0);
 
     // XXX Should be pci_bus3
#4 lore raw

Re: [Qemu-devel] [PATCH 2/2] sparc64: clean up pci bridge map

Quoted 9 lines · Blue Swirl
Quoted 6 lines · Igor V. Kovalenko

From: Igor V. Kovalenko <[email protected]>

- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base

Quoted 4 lines

Looks good. Could you make a separate patch from the part that depends on OpenBIOS update and another for the cleanups? I think the cleanups could be applied quickly, but the OpenBIOS PCI changes may need more consideration.

The only real cleanup is removal of host state which becomes unusable after mapping change. I think these changes may go in as is along with OpenBIOS set "sparc64 cleanups v1" which supports changed address ranges.

The PCI changes to OpenBIOS in set "encode-int related changes and pci bus scan amendment" are separate but there is a simple dependency on these cleanups in register mapping area.

It was probably bad idea to split OpenBIOS changes to 2 sets instead of sending those as one series.

Signature · 2 lines
Kind regards,
Igor V. Kovalenko
Applied
#5 lore raw
In reply to Igor V. Kovalenko

Thanks, applied both.

Quoted 19 lines · Igor V. Kovalenko

- rename sun4u cpu to Ultrasparc IIi
- cleanup pci bridge map (requires openbios change)

v0->v1: split out rename of sun4u cpu to separate patch

---

Igor V. Kovalenko (2):
     sparc64: rename sun4u cpu to Ultrasparc IIi
     sparc64: clean up pci bridge map

 hw/apb_pci.c |   49 ++++++++++++++++++++++++++----------------------- hw/sun4u.c   |    6 +++---

 2 files changed, 29 insertions(+), 26 deletions(-)

--