DVB flexcop-pci sanitize driver name to avoid warning on load
PATCH 1/1 DVB flexcop-pci sanitize driver name to avoid warning on load
Hi,
DVB driver for Flexcop/Technisat receiver currently calls request_irq() with a long driver name containing slashes. This triggers a warning when kernel tries to create /proc/irq/[NN]/[driver name] directory (attached to avoid mangling).
The patch in attachment changes the driver name used in pci_request_regions() and request_irq() to a shorter version without slashes.
Signed-off-by Jindrich Makovicka <[email protected]>
Signature · 1 line
Jindrich Makovicka
Jun 1 11:53:30 holly kernel: flexcop-pci: will use the HW PID filter. Jun 1 11:53:30 holly kernel: flexcop-pci: card revision 2 Jun 1 11:53:30 holly kernel: b2c2_flexcop_pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Jun 1 11:53:30 holly kernel: ------------[ cut here ]------------ Jun 1 11:53:30 holly kernel: WARNING: at fs/proc/generic.c:317 __xlate_proc_name+0xb5/0xd0() Jun 1 11:53:30 holly kernel: Hardware name: P55M-UD4 Jun 1 11:53:30 holly kernel: name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver' Jun 1 11:53:30 holly kernel: Modules linked in: b2c2_flexcop_pci(+) btusb b2c2_flexcop videodev snd_timer snd_seq_device usbhid(+) bluetooth snd v4l2_compat_ioctl32 blackmagic(P+) usb_storage i2c_i801 dvb_core snd_page_alloc nvidia(P) i2c_core lirc_mceusb2 lirc_dev uhci_hcd ehci_hcd firewire_ohci firewire_core r8169 mii usbcore [last unloaded: scsi_wait_scan] Jun 1 11:53:30 holly kernel: Pid: 1363, comm: modprobe Tainted: P 2.6.35-rc1 #2 Jun 1 11:53:30 holly kernel: Call Trace: Jun 1 11:53:30 holly kernel: [<ffffffff8103f58b>] ? warn_slowpath_common+0x7b/0xc0 Jun 1 11:53:30 holly kernel: [<ffffffff8103f685>] ? warn_slowpath_fmt+0x45/0x50 Jun 1 11:53:30 holly kernel: [<ffffffff811102c5>] ? __xlate_proc_name+0xb5/0xd0 Jun 1 11:53:30 holly kernel: [<ffffffff8111089e>] ? __proc_create+0x7e/0x150 Jun 1 11:53:30 holly kernel: [<ffffffff81111247>] ? proc_mkdir_mode+0x27/0x60 Jun 1 11:53:30 holly kernel: [<ffffffff81078b15>] ? register_handler_proc+0x115/0x130 Jun 1 11:53:30 holly kernel: [<ffffffff81076291>] ? __setup_irq+0x1d1/0x320 Jun 1 11:53:30 holly kernel: [<ffffffffa0048160>] ? flexcop_pci_isr+0x0/0x190 [b2c2_flexcop_pci] Jun 1 11:53:30 holly kernel: [<ffffffff810764e3>] ? request_threaded_irq+0x103/0x160 Jun 1 11:53:30 holly kernel: [<ffffffffa0048495>] ? flexcop_pci_probe+0x1a5/0x330 [b2c2_flexcop_pci] Jun 1 11:53:30 holly kernel: [<ffffffff81238202>] ? local_pci_probe+0x12/0x20 Jun 1 11:53:30 holly kernel: [<ffffffff81238bbc>] ? pci_device_probe+0x8c/0xc0 Jun 1 11:53:30 holly kernel: [<ffffffff812bcaca>] ? driver_sysfs_add+0x5a/0x80 Jun 1 11:53:30 holly kernel: [<ffffffff812bcbf7>] ? driver_probe_device+0x87/0x1a0 Jun 1 11:53:30 holly kernel: [<ffffffff812bcda3>] ? __driver_attach+0x93/0xa0 Jun 1 11:53:30 holly kernel: [<ffffffff812bcd10>] ? __driver_attach+0x0/0xa0 Jun 1 11:53:30 holly kernel: [<ffffffff812bc328>] ? bus_for_each_dev+0x58/0x80 Jun 1 11:53:30 holly kernel: [<ffffffff812bbb00>] ? bus_add_driver+0xb0/0x250 Jun 1 11:53:30 holly kernel: [<ffffffff812bd090>] ? driver_register+0x70/0x130 Jun 1 11:53:30 holly kernel: [<ffffffff81238e6c>] ? __pci_register_driver+0x4c/0xc0 Jun 1 11:53:30 holly kernel: [<ffffffffa005b000>] ? flexcop_pci_module_init+0x0/0x20 [b2c2_flexcop_pci] Jun 1 11:53:30 holly kernel: [<ffffffff810001d4>] ? do_one_initcall+0x34/0x1a0 Jun 1 11:53:30 holly kernel: [<ffffffff8106fc4e>] ? sys_init_module+0xde/0x260 Jun 1 11:53:30 holly kernel: [<ffffffff8100246b>] ? system_call_fastpath+0x16/0x1b Jun 1 11:53:30 holly kernel: ---[ end trace 14b94af06f60b8de ]--- Jun 1 11:53:30 holly kernel: DVB: registering new adapter (FlexCop Digital TV device) Jun 1 11:53:30 holly kernel: b2c2-flexcop: MAC address = 00:d0:d7:0c:ea:51
flexcop-pci.c renamed from flexcop-pci.c~ +2 -2
@@ -38,7 +38,7 @@ DEBSTATUS);#define DRIVER_VERSION "0.1" -#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" +#define DRIVER_NAME "b2c2_flexcop_pci"#define DRIVER_AUTHOR "Patrick Boettcher <[email protected]>"struct flexcop_pci {
@@ -448,5 +448,5 @@module_exit (flexcop_pci_module_exit);MODULE_AUTHOR (DRIVER_AUTHOR ); -MODULE_DESCRIPTION (DRIVER_NAME ); +MODULE_DESCRIPTION ("Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" );MODULE_LICENSE ("GPL" );