powerpc/5200: Update defconfigs
PATCH 1/1 powerpc/5200: Update defconfigs
--- arch/powerpc/configs/52xx/cm5200_defconfig | 45 +++-- arch/powerpc/configs/52xx/lite5200b_defconfig | 109 +++++++++---- arch/powerpc/configs/52xx/motionpro_defconfig | 76 ++++++--- arch/powerpc/configs/52xx/pcm030_defconfig | 108 ++++++++---- arch/powerpc/configs/52xx/tqm5200_defconfig | 75 ++++++--- arch/powerpc/configs/mpc5200_defconfig | 217 ++++++++++++++++--------- 6 files changed, 421 insertions(+), 209 deletions(-)
arch/powerpc/configs/52xx/cm5200_defconfig +26 -19
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.34-rc1 -# Wed Mar 10 14:34:22 2010 +# Linux kernel version: 2.6.35-rc1 +# Thu Jun 3 08:28:02 2010 # # CONFIG_PPC64 is not set
@@ -72,6 +72,7 @@ CONFIG_CONSTRUCTORS=y CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y
@@ -144,6 +145,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y
@@ -308,6 +310,8 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +# CONFIG_NEED_DMA_MAP_STATE is not set +CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set
@@ -379,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +# CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set
@@ -411,9 +416,14 @@ CONFIG_WIRELESS=y # # CFG80211 needs to be enabled for MAC80211 # + +# +# Some wireless drivers require a rate control algorithm +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set +# CONFIG_CAIF is not set # # Device Drivers
@@ -451,6 +461,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set #
@@ -543,6 +554,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y
@@ -603,6 +615,7 @@ CONFIG_LXT_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y
@@ -640,6 +653,7 @@ CONFIG_WLAN=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
@@ -666,6 +680,7 @@ CONFIG_WLAN=y # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_N_GSM is not set # # Serial drivers
@@ -683,6 +698,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y
@@ -695,6 +712,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +# CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y
@@ -725,15 +743,9 @@ CONFIG_I2C_MPC=y # Other I2C/SMBus bus drivers # # CONFIG_I2C_PCA_PLATFORM is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set #
@@ -753,7 +765,6 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set #
@@ -766,15 +777,14 @@ CONFIG_SSB_POSSIBLE=y # Sonics Silicon Backplane # # CONFIG_SSB is not set - -# -# Multifunction device drivers -# +CONFIG_MFD_SUPPORT=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS6507X is not set # CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TC35892 is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set
@@ -784,7 +794,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set -# CONFIG_AB3100_CORE is not set +# CONFIG_ABX500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set
@@ -815,7 +825,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set
@@ -918,10 +927,6 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set #
@@ -1035,6 +1040,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set
@@ -1200,6 +1206,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set
arch/powerpc/configs/52xx/lite5200b_defconfig +74 -35
290 lines not on this page · raw message
arch/powerpc/configs/52xx/motionpro_defconfig +56 -20
237 lines not on this page · raw message
arch/powerpc/configs/52xx/pcm030_defconfig +72 -36
289 lines not on this page · raw message
arch/powerpc/configs/52xx/tqm5200_defconfig +55 -20
233 lines not on this page · raw message
arch/powerpc/configs/mpc5200_defconfig +138 -79
583 lines not on this page · raw message
Quoted 4 lines · Grant Likely
Signed-off-by Grant Likely <[email protected]>CC Benjamin Herrenschmidt <[email protected]>---
... and my timing is fantastic in light of the defconfig discussion going on on the LKML. :-)
http://lkml.org/lkml/2010/6/2/472
g.
It seems to me like what's confused in the defconfigs is two concepts:
1) The requirements of a platform (what options must be set and must not be set)
2) The guarantee that a particular config was known to work at some point in time.
The first could allow you to drop 99% of the options (I think that this mainly what Linus objects to)
The second is better handled with testing anyway (assuming that all of the unmentioned options are, in fact, unset)
Steve
Quoted 2 lines
-----Original Message-----
From: linuxppc-dev-bounces+stephen=3Dneuendorffer.name@lists.ozlabs.org
[mailto:linuxppc-dev-
Quoted 1 line
[email protected]] On Behalf Of Grant
Likely
Quoted 7 lines
Sent: Thursday, June 03, 2010 4:13 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [PATCH] powerpc/5200: Update defconfigs =On Thu, Jun 3, 2010 at 3:17 PM, Grant Likely
Quoted 10 lines · <[email protected]> wrote:
Quoted 4 lines
Signed-off-by Grant Likely <[email protected]>CC Benjamin Herrenschmidt <[email protected]>---
=
... and my timing is fantastic in light of the defconfig discussion going on on the LKML. :-)
=
Quoted 8 lines
http://lkml.org/lkml/2010/6/2/472
=g.
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.
Quoted 5 lines · Stephen Neuendorffer
It seems to me like what's confused in the defconfigs is two concepts:
1) The requirements of a platform (what options must be set and must not be set)
2) The guarantee that a particular config was known to work at some point in time.
I can't speak for other maintainers; but #2 is not something I worry about w.r.t. defconfigs. That guarantee is pretty meaningless for anything but an exact version of the kernel tree.
Quoted 2 lines
The first could allow you to drop 99% of the options (I think that this mainly what Linus objects to)
That, and the fact that the current files are machine-generated as opposed to something written/edited/maintained by a human.
Quoted 2 lines
The second is better handled with testing anyway (assuming that all of the unmentioned options are, in fact, unset)
Yup.
g.