New: jmb38x recognized and works only if a card is plugged in during boot
A message that is not in the archive (sent off-list or not yet received): [email protected]/
(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
Quoted 19 lines · On Fri, 4 Jun 2010 01:09:03 GMT [email protected] wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=16119
Summary: jmb38x recognized and works only if a card is plugged
in during boot
Product: Drivers
Version: 2.5
Kernel Version: 2.6.34
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: MMC/SD
AssignedTo: [email protected]
ReportedBy: [email protected]
Regression: No
Quoted 5 lines
Created an attachment (id=26643)
--> (https://bugzilla.kernel.org/attachment.cgi?id=26643)
lspci results with card plugged inAcer Aspire 8942G, card reader works only if a card was plugged in before boot.
hm, I don't know who wold be the appropriate person to look into this. Let's try the mailing list.
Quoted 2 lines · Andrew Morton
hm, I don't know who wold be the appropriate person to look into this. Let's try the mailing list.
Eugene, could you please try adding:
options sdhci debug_quirks=1
to a new file named /etc/modprobe.d/sdhci-quirk.conf and rebooting? Please include lspci -n and dmesg output in your reply.
It would also be useful to know whether you see the same problem when booting (say) a Fedora 13 livecd, since the link below claims that Fedora doesn't share this bug:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/258446
- Chris.
Signature · 2 lines
Chris Ball <[email protected]> One Laptop Per Child