Skip to contentSkip to conversation

target skeleton definition

PATCH New Dmytro Milinevskyy 3 participants 11 messages Jun 7, 2010 – Jun 9, 2010

Subsystems (3)
VFS Kbuild Arm/Microchip (AT91) SoC support
lore
Share & tools
lore

Dmytro Milinevskyy

author
#0 lore raw

PATCH 1/1 target skeleton definition

Hi!

Here's the patch to give posibility to redefine path to the rootfs skeleton. Also this patch moves default and busybox skeleton trees into fs/skeleton dir.

-- Dima

Signed-off-by Dmytro Milinevskyy <[email protected]>
---
 Makefile                                           |   10 +
 configs/at91rm9200df_defconfig                     |    2 +-
 configs/at91rm9200df_ext_defconfig                 |    2 +-
 configs/at91sam9260dfc_defconfig                   |    2 +-
 configs/at91sam9260dfc_ext_defconfig               |    2 +-
 configs/at91sam9260pf_defconfig                    |    2 +-
 configs/at91sam9261ek_defconfig                    |    2 +-
 configs/at91sam9261ek_ext_defconfig                |    2 +-
 configs/at91sam9263ek_defconfig                    |    2 +-
 configs/at91sam9263ek_ext_defconfig                |    2 +-
 configs/at91sam9g20dfc_defconfig                   |    2 +-
 configs/at91sam9g20dfc_ext_defconfig               |    2 +-
 configs/atngw100-base_defconfig                    |    2 +-
 configs/atngw100_defconfig                         |    2 +-
 configs/atstk1005_defconfig                        |    2 +-
 configs/atstk100x_defconfig                        |    2 +-
 configs/i386_defconfig                             |    2 +-
 configs/i686_defconfig                             |    2 +-
 configs/integrator926_defconfig                    |    2 +-
 configs/integrator926_huge_defconfig               |    2 +-
 configs/kb9202_defconfig                           |    2 +-
 configs/v100sc2_defconfig                          |    2 +-
 fs/Config.in                                       |   30 ++
 fs/skeleton/busybox/etc/TZ                         |    1 +
 fs/skeleton/busybox/etc/fstab                      |    8 +
 fs/skeleton/busybox/etc/group                      |   16 +
 fs/skeleton/busybox/etc/hostname                   |    1 +
 fs/skeleton/busybox/etc/hosts                      |    1 +
 fs/skeleton/busybox/etc/init.d/S20urandom          |   54 ++++
 fs/skeleton/busybox/etc/init.d/S40network          |   25 ++
 fs/skeleton/busybox/etc/init.d/rcS                 |   27 ++
 fs/skeleton/busybox/etc/inittab                    |   53 ++++
 fs/skeleton/busybox/etc/inputrc                    |   44 +++
 fs/skeleton/busybox/etc/issue                      |    3 +
 fs/skeleton/busybox/etc/mtab                       |    1 +
 fs/skeleton/busybox/etc/network/interfaces         |    4 +
 fs/skeleton/busybox/etc/passwd                     |   15 +
 fs/skeleton/busybox/etc/profile                    |   48 +++
 fs/skeleton/busybox/etc/protocols                  |   31 ++
 fs/skeleton/busybox/etc/random-seed                |  Bin 0 -> 512 bytes
 fs/skeleton/busybox/etc/resolv.conf                |    1 +
 fs/skeleton/busybox/etc/securetty                  |   35 +++
 fs/skeleton/busybox/etc/services                   |  302 ++++++++++++++++++++
 fs/skeleton/busybox/etc/shadow                     |   12 +
 fs/skeleton/busybox/var/cache                      |    1 +
 fs/skeleton/busybox/var/lib/pcmcia                 |    1 +
 fs/skeleton/busybox/var/lock                       |    1 +
 fs/skeleton/busybox/var/log                        |    1 +
 fs/skeleton/busybox/var/pcmcia                     |    1 +
 fs/skeleton/busybox/var/run                        |    1 +
 fs/skeleton/busybox/var/spool                      |    1 +
 fs/skeleton/busybox/var/tmp                        |    1 +
 fs/skeleton/default/dev/log                        |    1 +
 fs/skeleton/default/etc/TZ                         |    1 +
 fs/skeleton/default/etc/fstab                      |    8 +
 fs/skeleton/default/etc/group                      |   17 ++
 fs/skeleton/default/etc/hostname                   |    1 +
 fs/skeleton/default/etc/hosts                      |    1 +
 fs/skeleton/default/etc/init.d/S20urandom          |   54 ++++
 fs/skeleton/default/etc/init.d/S40network          |   25 ++
 fs/skeleton/default/etc/init.d/rcS                 |   27 ++
 fs/skeleton/default/etc/inittab                    |   48 +++
 fs/skeleton/default/etc/inputrc                    |   44 +++
 fs/skeleton/default/etc/issue                      |    3 +
 fs/skeleton/default/etc/mtab                       |    1 +
 fs/skeleton/default/etc/network/interfaces         |    4 +
 fs/skeleton/default/etc/passwd                     |   15 +
 fs/skeleton/default/etc/profile                    |   48 +++
 fs/skeleton/default/etc/protocols                  |   31 ++
 fs/skeleton/default/etc/random-seed                |  Bin 0 -> 512 bytes
 fs/skeleton/default/etc/resolv.conf                |    1 +
 fs/skeleton/default/etc/securetty                  |   35 +++
 fs/skeleton/default/etc/services                   |  302 ++++++++++++++++++++
 fs/skeleton/default/etc/shadow                     |   12 +
 fs/skeleton/default/root/.bash_logout              |    7 +
 fs/skeleton/default/root/.bash_profile             |   15 +
 fs/skeleton/default/root/.bashrc                   |   48 +++
 .../default/usr/share/udhcpc/default.script        |   39 +++
 fs/skeleton/default/var/cache                      |    1 +
 fs/skeleton/default/var/lib/pcmcia                 |    1 +
 fs/skeleton/default/var/lock                       |    1 +
 fs/skeleton/default/var/log                        |    1 +
 fs/skeleton/default/var/pcmcia                     |    1 +
 fs/skeleton/default/var/run                        |    1 +
 fs/skeleton/default/var/spool                      |    1 +
 fs/skeleton/default/var/tmp                        |    1 +
 package/busybox/Config.in                          |    6 -
 package/busybox/busybox.mk                         |    2 +-
 target/generic/Makefile.in                         |    7 -
 target/generic/target_busybox_skeleton/etc/TZ      |    1 -
 target/generic/target_busybox_skeleton/etc/fstab   |    8 -
 target/generic/target_busybox_skeleton/etc/group   |   16 -
 .../generic/target_busybox_skeleton/etc/hostname   |    1 -
 target/generic/target_busybox_skeleton/etc/hosts   |    1 -
 .../target_busybox_skeleton/etc/init.d/S20urandom  |   54 ----
 .../target_busybox_skeleton/etc/init.d/S40network  |   25 --
 .../generic/target_busybox_skeleton/etc/init.d/rcS |   27 --
 target/generic/target_busybox_skeleton/etc/inittab |   53 ----
 target/generic/target_busybox_skeleton/etc/inputrc |   44 ---
 target/generic/target_busybox_skeleton/etc/issue   |    3 -
 target/generic/target_busybox_skeleton/etc/mtab    |    1 -
 .../target_busybox_skeleton/etc/network/interfaces |    4 -
 target/generic/target_busybox_skeleton/etc/passwd  |   15 -
 target/generic/target_busybox_skeleton/etc/profile |   48 ---
 .../generic/target_busybox_skeleton/etc/protocols  |   31 --
 .../target_busybox_skeleton/etc/random-seed        |  Bin 512 -> 0 bytes
 .../target_busybox_skeleton/etc/resolv.conf        |    1 -
 .../generic/target_busybox_skeleton/etc/securetty  |   35 ---
 .../generic/target_busybox_skeleton/etc/services   |  302 --------------------
 target/generic/target_busybox_skeleton/etc/shadow  |   12 -
 target/generic/target_busybox_skeleton/var/cache   |    1 -
 .../generic/target_busybox_skeleton/var/lib/pcmcia |    1 -
 target/generic/target_busybox_skeleton/var/lock    |    1 -
 target/generic/target_busybox_skeleton/var/log     |    1 -
 target/generic/target_busybox_skeleton/var/pcmcia  |    1 -
 target/generic/target_busybox_skeleton/var/run     |    1 -
 target/generic/target_busybox_skeleton/var/spool   |    1 -
 target/generic/target_busybox_skeleton/var/tmp     |    1 -
 target/generic/target_skeleton/dev/log             |    1 -
 target/generic/target_skeleton/etc/TZ              |    1 -
 target/generic/target_skeleton/etc/fstab           |    8 -
 target/generic/target_skeleton/etc/group           |   17 --
 target/generic/target_skeleton/etc/hostname        |    1 -
 target/generic/target_skeleton/etc/hosts           |    1 -
 .../generic/target_skeleton/etc/init.d/S20urandom  |   54 ----
 .../generic/target_skeleton/etc/init.d/S40network  |   25 --
 target/generic/target_skeleton/etc/init.d/rcS      |   27 --
 target/generic/target_skeleton/etc/inittab         |   48 ---
 target/generic/target_skeleton/etc/inputrc         |   44 ---
 target/generic/target_skeleton/etc/issue           |    3 -
 target/generic/target_skeleton/etc/mtab            |    1 -
 .../generic/target_skeleton/etc/network/interfaces |    4 -
 target/generic/target_skeleton/etc/passwd          |   15 -
 target/generic/target_skeleton/etc/profile         |   48 ---
 target/generic/target_skeleton/etc/protocols       |   31 --
 target/generic/target_skeleton/etc/random-seed     |  Bin 512 -> 0 bytes
 target/generic/target_skeleton/etc/resolv.conf     |    1 -
 target/generic/target_skeleton/etc/securetty       |   35 ---
 target/generic/target_skeleton/etc/services        |  302 --------------------
 target/generic/target_skeleton/etc/shadow          |   12 -
 target/generic/target_skeleton/root/.bash_logout   |    7 -
 target/generic/target_skeleton/root/.bash_profile  |   15 -
 target/generic/target_skeleton/root/.bashrc        |   48 ---
 .../usr/share/udhcpc/default.script                |   39 ---
 target/generic/target_skeleton/var/cache           |    1 -
 target/generic/target_skeleton/var/lib/pcmcia      |    1 -
 target/generic/target_skeleton/var/lock            |    1 -
 target/generic/target_skeleton/var/log             |    1 -
 target/generic/target_skeleton/var/pcmcia          |    1 -
 target/generic/target_skeleton/var/run             |    1 -
 target/generic/target_skeleton/var/spool           |    1 -
 target/generic/target_skeleton/var/tmp             |    1 -
 152 files changed, 1548 insertions(+), 1521 deletions(-)
 create mode 100644 fs/skeleton/busybox/dev/.empty
 create mode 100644 fs/skeleton/busybox/etc/TZ
 create mode 100644 fs/skeleton/busybox/etc/fstab
 create mode 100644 fs/skeleton/busybox/etc/group
 create mode 100644 fs/skeleton/busybox/etc/hostname
 create mode 100644 fs/skeleton/busybox/etc/hosts
 create mode 100755 fs/skeleton/busybox/etc/init.d/S20urandom
 create mode 100755 fs/skeleton/busybox/etc/init.d/S40network
 create mode 100755 fs/skeleton/busybox/etc/init.d/rcS
 create mode 100644 fs/skeleton/busybox/etc/inittab
 create mode 100644 fs/skeleton/busybox/etc/inputrc
 create mode 100644 fs/skeleton/busybox/etc/issue
 create mode 120000 fs/skeleton/busybox/etc/mtab
 create mode 100644 fs/skeleton/busybox/etc/network/interfaces
 create mode 100644 fs/skeleton/busybox/etc/passwd
 create mode 100644 fs/skeleton/busybox/etc/profile
 create mode 100644 fs/skeleton/busybox/etc/protocols
 create mode 100644 fs/skeleton/busybox/etc/random-seed
 create mode 120000 fs/skeleton/busybox/etc/resolv.conf
 create mode 100644 fs/skeleton/busybox/etc/securetty
 create mode 100644 fs/skeleton/busybox/etc/services
 create mode 100644 fs/skeleton/busybox/etc/shadow
 create mode 100644 fs/skeleton/busybox/proc/.empty
 create mode 100644 fs/skeleton/busybox/root/.empty
 create mode 100644 fs/skeleton/busybox/sys/.empty
 create mode 100644 fs/skeleton/busybox/tmp/.empty
 create mode 100644 fs/skeleton/busybox/usr/sbin/.empty
 create mode 120000 fs/skeleton/busybox/var/cache
 create mode 120000 fs/skeleton/busybox/var/lib/pcmcia
 create mode 120000 fs/skeleton/busybox/var/lock
 create mode 120000 fs/skeleton/busybox/var/log
 create mode 120000 fs/skeleton/busybox/var/pcmcia
 create mode 120000 fs/skeleton/busybox/var/run
 create mode 120000 fs/skeleton/busybox/var/spool
 create mode 120000 fs/skeleton/busybox/var/tmp
 create mode 100644 fs/skeleton/default/bin/.empty
 create mode 120000 fs/skeleton/default/dev/log
 create mode 100644 fs/skeleton/default/dev/pts/.empty
 create mode 100644 fs/skeleton/default/etc/TZ
 create mode 100644 fs/skeleton/default/etc/fstab
 create mode 100644 fs/skeleton/default/etc/group
 create mode 100644 fs/skeleton/default/etc/hostname
 create mode 100644 fs/skeleton/default/etc/hosts
 create mode 100755 fs/skeleton/default/etc/init.d/S20urandom
 create mode 100755 fs/skeleton/default/etc/init.d/S40network
 create mode 100755 fs/skeleton/default/etc/init.d/rcS
 create mode 100644 fs/skeleton/default/etc/inittab
 create mode 100644 fs/skeleton/default/etc/inputrc
 create mode 100644 fs/skeleton/default/etc/issue
 create mode 100644 fs/skeleton/default/etc/ld.so.conf.d/.empty
 create mode 120000 fs/skeleton/default/etc/mtab
 create mode 100644 fs/skeleton/default/etc/network/interfaces
 create mode 100644 fs/skeleton/default/etc/passwd
 create mode 100644 fs/skeleton/default/etc/profile
 create mode 100644 fs/skeleton/default/etc/protocols
 create mode 100644 fs/skeleton/default/etc/random-seed
 create mode 120000 fs/skeleton/default/etc/resolv.conf
 create mode 100644 fs/skeleton/default/etc/securetty
 create mode 100644 fs/skeleton/default/etc/services
 create mode 100644 fs/skeleton/default/etc/shadow
 create mode 100644 fs/skeleton/default/home/.empty
 create mode 100644 fs/skeleton/default/lib/.empty
 create mode 100644 fs/skeleton/default/mnt/.empty
 create mode 100644 fs/skeleton/default/opt/.empty
 create mode 100644 fs/skeleton/default/proc/.empty
 create mode 100644 fs/skeleton/default/root/.bash_history
 create mode 100644 fs/skeleton/default/root/.bash_logout
 create mode 100644 fs/skeleton/default/root/.bash_profile
 create mode 100644 fs/skeleton/default/root/.bashrc
 create mode 100644 fs/skeleton/default/root/.empty
 create mode 100644 fs/skeleton/default/sbin/.empty
 create mode 100644 fs/skeleton/default/sys/.empty
 create mode 100644 fs/skeleton/default/tmp/.empty
 create mode 100644 fs/skeleton/default/usr/bin/.empty
 create mode 100644 fs/skeleton/default/usr/lib/.empty
 create mode 100644 fs/skeleton/default/usr/sbin/.empty
 create mode 100755 fs/skeleton/default/usr/share/udhcpc/default.script
 create mode 120000 fs/skeleton/default/var/cache
 create mode 120000 fs/skeleton/default/var/lib/pcmcia
 create mode 120000 fs/skeleton/default/var/lock
 create mode 120000 fs/skeleton/default/var/log
 create mode 120000 fs/skeleton/default/var/pcmcia
 create mode 120000 fs/skeleton/default/var/run
 create mode 120000 fs/skeleton/default/var/spool
 create mode 120000 fs/skeleton/default/var/tmp
 delete mode 100644 target/generic/target_busybox_skeleton/dev/.empty
 delete mode 100644 target/generic/target_busybox_skeleton/etc/TZ
 delete mode 100644 target/generic/target_busybox_skeleton/etc/fstab
 delete mode 100644 target/generic/target_busybox_skeleton/etc/group
 delete mode 100644 target/generic/target_busybox_skeleton/etc/hostname
 delete mode 100644 target/generic/target_busybox_skeleton/etc/hosts
 delete mode 100755 target/generic/target_busybox_skeleton/etc/init.d/S20urandom
 delete mode 100755 target/generic/target_busybox_skeleton/etc/init.d/S40network
 delete mode 100755 target/generic/target_busybox_skeleton/etc/init.d/rcS
 delete mode 100644 target/generic/target_busybox_skeleton/etc/inittab
 delete mode 100644 target/generic/target_busybox_skeleton/etc/inputrc
 delete mode 100644 target/generic/target_busybox_skeleton/etc/issue
 delete mode 120000 target/generic/target_busybox_skeleton/etc/mtab
 delete mode 100644 target/generic/target_busybox_skeleton/etc/network/interfaces
 delete mode 100644 target/generic/target_busybox_skeleton/etc/passwd
 delete mode 100644 target/generic/target_busybox_skeleton/etc/profile
 delete mode 100644 target/generic/target_busybox_skeleton/etc/protocols
 delete mode 100644 target/generic/target_busybox_skeleton/etc/random-seed
 delete mode 120000 target/generic/target_busybox_skeleton/etc/resolv.conf
 delete mode 100644 target/generic/target_busybox_skeleton/etc/securetty
 delete mode 100644 target/generic/target_busybox_skeleton/etc/services
 delete mode 100644 target/generic/target_busybox_skeleton/etc/shadow
 delete mode 100644 target/generic/target_busybox_skeleton/proc/.empty
 delete mode 100644 target/generic/target_busybox_skeleton/root/.empty
 delete mode 100644 target/generic/target_busybox_skeleton/sys/.empty
 delete mode 100644 target/generic/target_busybox_skeleton/tmp/.empty
 delete mode 100644 target/generic/target_busybox_skeleton/usr/sbin/.empty
 delete mode 120000 target/generic/target_busybox_skeleton/var/cache
 delete mode 120000 target/generic/target_busybox_skeleton/var/lib/pcmcia
 delete mode 120000 target/generic/target_busybox_skeleton/var/lock
 delete mode 120000 target/generic/target_busybox_skeleton/var/log
 delete mode 120000 target/generic/target_busybox_skeleton/var/pcmcia
 delete mode 120000 target/generic/target_busybox_skeleton/var/run
 delete mode 120000 target/generic/target_busybox_skeleton/var/spool
 delete mode 120000 target/generic/target_busybox_skeleton/var/tmp
 delete mode 100644 target/generic/target_skeleton/bin/.empty
 delete mode 120000 target/generic/target_skeleton/dev/log
 delete mode 100644 target/generic/target_skeleton/dev/pts/.empty
 delete mode 100644 target/generic/target_skeleton/etc/TZ
 delete mode 100644 target/generic/target_skeleton/etc/fstab
 delete mode 100644 target/generic/target_skeleton/etc/group
 delete mode 100644 target/generic/target_skeleton/etc/hostname
 delete mode 100644 target/generic/target_skeleton/etc/hosts
 delete mode 100755 target/generic/target_skeleton/etc/init.d/S20urandom
 delete mode 100755 target/generic/target_skeleton/etc/init.d/S40network
 delete mode 100755 target/generic/target_skeleton/etc/init.d/rcS
 delete mode 100644 target/generic/target_skeleton/etc/inittab
 delete mode 100644 target/generic/target_skeleton/etc/inputrc
 delete mode 100644 target/generic/target_skeleton/etc/issue
 delete mode 100644 target/generic/target_skeleton/etc/ld.so.conf.d/.empty
 delete mode 120000 target/generic/target_skeleton/etc/mtab
 delete mode 100644 target/generic/target_skeleton/etc/network/interfaces
 delete mode 100644 target/generic/target_skeleton/etc/passwd
 delete mode 100644 target/generic/target_skeleton/etc/profile
 delete mode 100644 target/generic/target_skeleton/etc/protocols
 delete mode 100644 target/generic/target_skeleton/etc/random-seed
 delete mode 120000 target/generic/target_skeleton/etc/resolv.conf
 delete mode 100644 target/generic/target_skeleton/etc/securetty
 delete mode 100644 target/generic/target_skeleton/etc/services
 delete mode 100644 target/generic/target_skeleton/etc/shadow
 delete mode 100644 target/generic/target_skeleton/home/.empty
 delete mode 100644 target/generic/target_skeleton/lib/.empty
 delete mode 100644 target/generic/target_skeleton/mnt/.empty
 delete mode 100644 target/generic/target_skeleton/opt/.empty
 delete mode 100644 target/generic/target_skeleton/proc/.empty
 delete mode 100644 target/generic/target_skeleton/root/.bash_history
 delete mode 100644 target/generic/target_skeleton/root/.bash_logout
 delete mode 100644 target/generic/target_skeleton/root/.bash_profile
 delete mode 100644 target/generic/target_skeleton/root/.bashrc
 delete mode 100644 target/generic/target_skeleton/root/.empty
 delete mode 100644 target/generic/target_skeleton/sbin/.empty
 delete mode 100644 target/generic/target_skeleton/sys/.empty
 delete mode 100644 target/generic/target_skeleton/tmp/.empty
 delete mode 100644 target/generic/target_skeleton/usr/bin/.empty
 delete mode 100644 target/generic/target_skeleton/usr/lib/.empty
 delete mode 100644 target/generic/target_skeleton/usr/sbin/.empty
 delete mode 100755 target/generic/target_skeleton/usr/share/udhcpc/default.script
 delete mode 120000 target/generic/target_skeleton/var/cache
 delete mode 120000 target/generic/target_skeleton/var/lib/pcmcia
 delete mode 120000 target/generic/target_skeleton/var/lock
 delete mode 120000 target/generic/target_skeleton/var/log
 delete mode 120000 target/generic/target_skeleton/var/pcmcia
 delete mode 120000 target/generic/target_skeleton/var/run
 delete mode 120000 target/generic/target_skeleton/var/spool
 delete mode 120000 target/generic/target_skeleton/var/tmp
Makefile +10 -0
index 68732fa..8a2e110 100644
@@ -376,6 +376,16 @@ endif
 	@mkdir -p $(STAGING_DIR)/usr/include
 	@mkdir -p $(STAGING_DIR)/usr/bin
 
+ifeq ($(BR2_ROOTFS_SKELETON_DEFAULT),y)
+TARGET_SKELETON=fs/skeleton/default
+endif
+ifeq ($(BR2_ROOTFS_SKELETON_BUSYBOX),y)
+TARGET_SKELETON=fs/skeleton/busybox
+endif
+ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
+TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
+endif
+
 $(BUILD_DIR)/.root:
 	mkdir -p $(TARGET_DIR)
 	if ! [ -d "$(TARGET_DIR)/bin" ]; then \
configs/at91rm9200df_defconfig +1 -1
index 7d2bcfd..d871593 100644
@@ -324,7 +324,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91rm9200df_ext_defconfig +1 -1
index 79e55fc..1673a11 100644
@@ -250,7 +250,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9260dfc_defconfig +1 -1
index 087067f..699eb09 100644
@@ -336,7 +336,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9260dfc_ext_defconfig +1 -1
index e52cd2d..7516300 100644
@@ -258,7 +258,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9260pf_defconfig +1 -1
index b45271c..b945a75 100644
@@ -238,7 +238,7 @@ BR2_BUSYBOX_VERSION="1.13.4"
 BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9261ek_defconfig +1 -1
index cd7483b..926f2df 100644
@@ -330,7 +330,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9261ek_ext_defconfig +1 -1
index 5ab47ad..c194123 100644
@@ -289,7 +289,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9263ek_defconfig +1 -1
index bc95b6b..d1810a1 100644
@@ -329,7 +329,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9263ek_ext_defconfig +1 -1
index 9771c83..9929c10 100644
@@ -251,7 +251,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9g20dfc_defconfig +1 -1
index 30cc4e1..e41b2e6 100644
@@ -329,7 +329,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/at91sam9g20dfc_ext_defconfig +1 -1
index e18754e..5cb22dd 100644
@@ -258,7 +258,7 @@ BR2_BUSYBOX_VERSION="1.13.2"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/atngw100-base_defconfig +1 -1
index d3092df..72b5827 100644
@@ -248,7 +248,7 @@ BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
configs/atngw100_defconfig +1 -1
index d7c9c15..d9f63f3 100644
@@ -245,7 +245,7 @@ BR2_BUSYBOX_VERSION="1.16.1"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 # BR2_PACKAGE_CUSTOMIZE is not set
 
 #
configs/atstk1005_defconfig +1 -1
index a1fe0b7..c62e841 100644
@@ -268,7 +268,7 @@ BR2_BUSYBOX_VERSION="1.13.4"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
configs/atstk100x_defconfig +1 -1
index 0fbbf14..d08892f 100644
@@ -259,7 +259,7 @@ BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="target/device/Atmel/atstk100x/busybox-1.9.1.config"
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
configs/i386_defconfig +1 -1
index 2481412..8af7807 100644
@@ -257,7 +257,7 @@ BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/i686_defconfig +1 -1
index 066842f..c6fe95c 100644
@@ -257,7 +257,7 @@ BR2_BUSYBOX_VERSION="1.14.0"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/integrator926_defconfig +1 -1
index 3879272..7b53f54 100644
@@ -255,7 +255,7 @@ BR2_BUSYBOX_VERSION="1.13.4"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
configs/integrator926_huge_defconfig +1 -1
index 86443db..696d0b0 100644
@@ -256,7 +256,7 @@ BR2_BUSYBOX_VERSION="1.13.4"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
configs/kb9202_defconfig +1 -1
index 4c84b9e..136688a 100644
@@ -254,7 +254,7 @@ BR2_BUSYBOX_VERSION="1.13.4"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-# BR2_PACKAGE_BUSYBOX_SKELETON is not set
+# BR2_ROOTFS_SKELETON_BUSYBOX is not set
 
 #
 # The minimum needed to build a uClibc development system
configs/v100sc2_defconfig +1 -1
index 0ad7ab0..cce862e 100644
@@ -229,7 +229,7 @@ BR2_BUSYBOX_VERSION="1.12.1"
 BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
 BR2_PACKAGE_BUSYBOX_CONFIG="target/device/valka/v100sc2/busybox.config"
 BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_BUSYBOX_SKELETON=y
+BR2_ROOTFS_SKELETON_BUSYBOX=y
 
 #
 # The minimum needed to build a uClibc development system
fs/Config.in +30 -0
index 6865eea..680ae81 100644
@@ -23,6 +23,36 @@ config BR2_ROOTFS_DEVICE_TABLE
          to the makedevs utility to create all the special device
          files in the target filesystem.
 
+choice
+	prompt "Root FS skeleton"
+
+	config BR2_ROOTFS_SKELETON_DEFAULT
+		bool "default target skeleton"
+        help
+          Use default target skeleton
+
+	config BR2_ROOTFS_SKELETON_CUSTOM
+		bool "custom target skeleton"
+		help
+	  	 Use custom target skeleton.
+
+	config BR2_ROOTFS_SKELETON_BUSYBOX
+		bool "minimal busybox target skeleton"
+        depends on BR2_PACKAGE_BUSYBOX
+		help
+	  	 Use a minimal target skeleton. Make sure to select mdev
+	  	 which is used to populate /dev/.
+
+endchoice
+
+if BR2_ROOTFS_SKELETON_CUSTOM
+	config BR2_ROOTFS_SKELETON_CUSTOM_PATH
+		string "custom target skeleton path"
+        default "fs/skeleton/default"
+		help
+	  	 Path custom target skeleton.
+endif
+
 source "fs/cramfs/Config.in"
 source "fs/cloop/Config.in"
 source "fs/ext2/Config.in"
fs/skeleton/busybox/dev/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/etc/TZ new file +1 -0
new file mode 100644
index 0000000..9fcb2a3
@@ -0,0 +1 @@
+MST7MDT
fs/skeleton/busybox/etc/fstab new file +8 -0
new file mode 100644
index 0000000..87d9da0
@@ -0,0 +1,8 @@
+# /etc/fstab: static file system information.
+#
+# <file system> <mount pt>     <type>	<options>         <dump> <pass>
+/dev/root       /              ext2	rw,noauto         0      1
+proc		/proc	       proc     defaults	  0	 0
+devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
+tmpfs           /tmp           tmpfs    defaults          0      0
+sysfs		/sys	       sysfs    defaults	  0	 0
fs/skeleton/busybox/etc/group new file +16 -0
new file mode 100644
index 0000000..f78c22c
@@ -0,0 +1,16 @@
+root:x:0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+wheel:x:10:root
+utmp:x:43:
+staff:x:50:
+haldaemon:x:68:
+dbus:x:81:
+nobody:x:99:
+nogroup:x:99:
+users:x:100:
+default:x:1000:
fs/skeleton/busybox/etc/hostname new file +1 -0
new file mode 100644
index 0000000..5b26b35
@@ -0,0 +1 @@
+buildroot
fs/skeleton/busybox/etc/hosts new file +1 -0
new file mode 100644
index 0000000..ba712fe
@@ -0,0 +1 @@
+127.0.0.1	localhost
fs/skeleton/busybox/etc/init.d/S20urandom new file +54 -0

54 lines not on this page · raw message

fs/skeleton/busybox/etc/init.d/S40network new file +25 -0
new file mode 100755
index 0000000..ad6d250
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Start the network....
+#
+
+case "$1" in
+  start)
+ 	echo "Starting network..."
+	/sbin/ifup -a
+	;;
+  stop)
+	echo -n "Stopping network..."
+	/sbin/ifdown -a
+	;;
+  restart|reload)
+	"$0" stop
+	"$0" start
+	;;
+  *)
+	echo $"Usage: $0 {start|stop|restart}"
+	exit 1
+esac
+
+exit $?
+
fs/skeleton/busybox/etc/init.d/rcS new file +27 -0
new file mode 100755
index 0000000..de41153
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /etc/init.d/S??* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+	*.sh)
+	    # Source shell script for speed.
+	    (
+		trap - INT QUIT TSTP
+		set start
+		. $i
+	    )
+	    ;;
+	*)
+	    # No sh extension, so fork subprocess.
+	    $i start
+	    ;;
+    esac
+done
+
fs/skeleton/busybox/etc/inittab new file +53 -0

53 lines not on this page · raw message

fs/skeleton/busybox/etc/inputrc new file +44 -0

44 lines not on this page · raw message

fs/skeleton/busybox/etc/issue new file +3 -0
new file mode 100644
index 0000000..90f1779
@@ -0,0 +1,3 @@
+
+Welcome to Buildroot
+
fs/skeleton/busybox/etc/mtab new file +1 -0
new file mode 120000
index 0000000..e1c2045
@@ -0,0 +1 @@
+../proc/mounts
\ No newline at end of file
fs/skeleton/busybox/etc/network/interfaces new file +4 -0
new file mode 100644
index 0000000..218b82c
@@ -0,0 +1,4 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
fs/skeleton/busybox/etc/passwd new file +15 -0
new file mode 100644
index 0000000..377d4df
@@ -0,0 +1,15 @@
+root:x:0:0:root:/root:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+nobody:x:99:99:nobody:/home:/bin/sh
+sshd:x:103:99:Operator:/var:/bin/sh
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
fs/skeleton/busybox/etc/profile new file +48 -0

48 lines not on this page · raw message

fs/skeleton/busybox/etc/protocols new file +31 -0
new file mode 100644
index 0000000..1ac8a40
@@ -0,0 +1,31 @@
+# /etc/protocols:
+# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
+#
+# Internet (IP) protocols
+#
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+
+ip	0	IP		# internet protocol, pseudo protocol number
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# Internet Group Management
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+egp	8	EGP		# exterior gateway protocol
+pup	12	PUP		# PARC universal packet protocol
+udp	17	UDP		# user datagram protocol
+hmp	20	HMP		# host monitoring protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+rdp	27	RDP		# "reliable datagram" protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
+rspf	73	RSPF		#Radio Shortest Path First.
+vmtp	81	VMTP		# Versatile Message Transport
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+ipip	94	IPIP		# Yet Another IP encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
fs/skeleton/busybox/etc/random-seed new file binary +0 -0
new file mode 100644
index 0000000000000000000000000000000000000000..f26038adc5d057a0b9d6ce5d3cda02ccb4a4d12e
GIT binary patch

zH?Zu5*rX8>4xpAvJIL$H4mg*!B4&9jh)7+B2j-fX7o at K*bzj;pJ$FwoQzl&MuZ^Wy zrYS)x9vq<)#e~&1uB|_ITW-fntEg1^KXs3>vvgL7?_kg!+6=fg{S7mwkr$#pm<zB( zu)oAUWFK-u-)cWcuSL*8$Q<cmC?ll~NEK@l5k|75(YzZ_p!I6FJ}YI_3>PZ13liCc zi|M+im&71p*p+Z|7f(m-aedNFtEezFN<xKEd-wQ71%XuGfKr+6VcDycMQ(v6+Z0G| z-MPjg@JHu%y(|h1cTa=a4(m?GyU)ZD-T+-vLXX}cCXyn}vCXC3Hn1ftzDTL(};Rr z?3wX?Eh5%n+AXAeDtXvl!o>-nZHytAhV~}?OM$-f$(%cG(ioV{==Ub4mfZP}OaJJ7 z25tvCcku=>;L?}O-dvK9}<^gmg@IrnfQm#P>RRF|C9c;GDgEg_bw26{dkIVt1{ z3#ol{Q_FL91TBD~{uZn<gw?^=VUuSaIf)=p07n=>RRZ(Otf!KXM&;q)8B<Q8(T)k z?Z}a{1Jyf~bQPL{qVQk6jFNfBr)0;57HwNo6Kw{wdPGHUWrfsJ}0VmW|Tr22whlO C+W_DI

literal 0
HcmV?d00001

fs/skeleton/busybox/etc/resolv.conf new file +1 -0
new file mode 120000
index 0000000..71f6f96
@@ -0,0 +1 @@
+../tmp/resolv.conf
\ No newline@end of file
fs/skeleton/busybox/etc/securetty new file +35 -0
new file mode 100644
index 0000000..b25f4a5
@@ -0,0 +1,35 @@
+tty1
+tty2
+tty3
+tty4
+tty5
+tty6
+tty7
+tty8
+ttyS0
+ttyS1
+ttyS2
+ttyS3
+ttyAMA0
+ttyAMA1
+ttyAMA2
+ttyAMA3
+ttySAC0
+ttySAC1
+ttySAC2
+ttySAC3
+ttyUL0
+ttyUL1
+ttyUL2
+ttyUL3
+ttyPSC0
+ttyPSC1
+ttyPSC2
+ttyPSC3
+ttyCPM0
+ttyCPM1
+ttyCPM2
+ttyCPM3
+ttymxc0
+ttymxc1
+ttymxc2
fs/skeleton/busybox/etc/services new file +302 -0

302 lines not on this page · raw message

fs/skeleton/busybox/etc/shadow new file +12 -0
new file mode 100644
index 0000000..4941a1a
@@ -0,0 +1,12 @@
+root::10933:0:99999:7:::
+bin:*:10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+adm:*:10933:0:99999:7:::
+lp:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+shutdown:*:10933:0:99999:7:::
+halt:*:10933:0:99999:7:::
+uucp:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::
+default::10933:0:99999:7:::
fs/skeleton/busybox/proc/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/root/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/sys/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/tmp/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/usr/sbin/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/busybox/var/cache new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/lib/pcmcia new file +1 -0
new file mode 120000
index 0000000..f1fde8c
@@ -0,0 +1 @@
+../../tmp
\ No newline at end of file
fs/skeleton/busybox/var/lock new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/log new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/pcmcia new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/run new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/spool new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/busybox/var/tmp new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/bin/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/dev/log new file +1 -0
new file mode 120000
index 0000000..d96b3b1
@@ -0,0 +1 @@
+../tmp/log
\ No newline at end of file
fs/skeleton/default/dev/pts/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/etc/TZ new file +1 -0
new file mode 100644
index 0000000..9fcb2a3
@@ -0,0 +1 @@
+MST7MDT
fs/skeleton/default/etc/fstab new file +8 -0
new file mode 100644
index 0000000..87d9da0
@@ -0,0 +1,8 @@
+# /etc/fstab: static file system information.
+#
+# <file system> <mount pt>     <type>	<options>         <dump> <pass>
+/dev/root       /              ext2	rw,noauto         0      1
+proc		/proc	       proc     defaults	  0	 0
+devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
+tmpfs           /tmp           tmpfs    defaults          0      0
+sysfs		/sys	       sysfs    defaults	  0	 0
fs/skeleton/default/etc/group new file +17 -0
new file mode 100644
index 0000000..c600be0
@@ -0,0 +1,17 @@
+root:x:0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+wheel:x:10:root
+utmp:x:43:
+staff:x:50:
+haldaemon:x:68:
+dbus:x:81:
+netdev:x:82:
+nobody:x:99:
+nogroup:x:99:
+users:x:100:
+default:x:1000:
fs/skeleton/default/etc/hostname new file +1 -0
new file mode 100644
index 0000000..5b26b35
@@ -0,0 +1 @@
+buildroot
fs/skeleton/default/etc/hosts new file +1 -0
new file mode 100644
index 0000000..ba712fe
@@ -0,0 +1 @@
+127.0.0.1	localhost
fs/skeleton/default/etc/init.d/S20urandom new file +54 -0

54 lines not on this page · raw message

fs/skeleton/default/etc/init.d/S40network new file +25 -0
new file mode 100755
index 0000000..ad6d250
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Start the network....
+#
+
+case "$1" in
+  start)
+ 	echo "Starting network..."
+	/sbin/ifup -a
+	;;
+  stop)
+	echo -n "Stopping network..."
+	/sbin/ifdown -a
+	;;
+  restart|reload)
+	"$0" stop
+	"$0" start
+	;;
+  *)
+	echo $"Usage: $0 {start|stop|restart}"
+	exit 1
+esac
+
+exit $?
+
fs/skeleton/default/etc/init.d/rcS new file +27 -0
new file mode 100755
index 0000000..de41153
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /etc/init.d/S??* ;do
+
+     # Ignore dangling symlinks (if any).
+     [ ! -f "$i" ] && continue
+
+     case "$i" in
+	*.sh)
+	    # Source shell script for speed.
+	    (
+		trap - INT QUIT TSTP
+		set start
+		. $i
+	    )
+	    ;;
+	*)
+	    # No sh extension, so fork subprocess.
+	    $i start
+	    ;;
+    esac
+done
+
fs/skeleton/default/etc/inittab new file +48 -0

48 lines not on this page · raw message

fs/skeleton/default/etc/inputrc new file +44 -0

44 lines not on this page · raw message

fs/skeleton/default/etc/issue new file +3 -0
new file mode 100644
index 0000000..90f1779
@@ -0,0 +1,3 @@
+
+Welcome to Buildroot
+
fs/skeleton/default/etc/ld.so.conf.d/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/etc/mtab new file +1 -0
new file mode 120000
index 0000000..e1c2045
@@ -0,0 +1 @@
+../proc/mounts
\ No newline at end of file
fs/skeleton/default/etc/network/interfaces new file +4 -0
new file mode 100644
index 0000000..218b82c
@@ -0,0 +1,4 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
fs/skeleton/default/etc/passwd new file +15 -0
new file mode 100644
index 0000000..377d4df
@@ -0,0 +1,15 @@
+root:x:0:0:root:/root:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+nobody:x:99:99:nobody:/home:/bin/sh
+sshd:x:103:99:Operator:/var:/bin/sh
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
fs/skeleton/default/etc/profile new file +48 -0

48 lines not on this page · raw message

fs/skeleton/default/etc/protocols new file +31 -0
new file mode 100644
index 0000000..1ac8a40
@@ -0,0 +1,31 @@
+# /etc/protocols:
+# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
+#
+# Internet (IP) protocols
+#
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+
+ip	0	IP		# internet protocol, pseudo protocol number
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# Internet Group Management
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st	5	ST		# ST datagram mode
+tcp	6	TCP		# transmission control protocol
+egp	8	EGP		# exterior gateway protocol
+pup	12	PUP		# PARC universal packet protocol
+udp	17	UDP		# user datagram protocol
+hmp	20	HMP		# host monitoring protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+rdp	27	RDP		# "reliable datagram" protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
+rspf	73	RSPF		#Radio Shortest Path First.
+vmtp	81	VMTP		# Versatile Message Transport
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+ipip	94	IPIP		# Yet Another IP encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
fs/skeleton/default/etc/random-seed new file binary +0 -0
new file mode 100644
index 0000000000000000000000000000000000000000..f26038adc5d057a0b9d6ce5d3cda02ccb4a4d12e
GIT binary patch

zH?Zu5*rX8>4xpAvJIL$H4mg*!B4&9jh)7+B2j-fX7o at K*bzj;pJ$FwoQzl&MuZ^Wy zrYS)x9vq<)#e~&1uB|_ITW-fntEg1^KXs3>vvgL7?_kg!+6=fg{S7mwkr$#pm<zB( zu)oAUWFK-u-)cWcuSL*8$Q<cmC?ll~NEK@l5k|75(YzZ_p!I6FJ}YI_3>PZ13liCc zi|M+im&71p*p+Z|7f(m-aedNFtEezFN<xKEd-wQ71%XuGfKr+6VcDycMQ(v6+Z0G| z-MPjg@JHu%y(|h1cTa=a4(m?GyU)ZD-T+-vLXX}cCXyn}vCXC3Hn1ftzDTL(};Rr z?3wX?Eh5%n+AXAeDtXvl!o>-nZHytAhV~}?OM$-f$(%cG(ioV{==Ub4mfZP}OaJJ7 z25tvCcku=>;L?}O-dvK9}<^gmg@IrnfQm#P>RRF|C9c;GDgEg_bw26{dkIVt1{ z3#ol{Q_FL91TBD~{uZn<gw?^=VUuSaIf)=p07n=>RRZ(Otf!KXM&;q)8B<Q8(T)k z?Z}a{1Jyf~bQPL{qVQk6jFNfBr)0;57HwNo6Kw{wdPGHUWrfsJ}0VmW|Tr22whlO C+W_DI

literal 0
HcmV?d00001

fs/skeleton/default/etc/resolv.conf new file +1 -0
new file mode 120000
index 0000000..71f6f96
@@ -0,0 +1 @@
+../tmp/resolv.conf
\ No newline@end of file
fs/skeleton/default/etc/securetty new file +35 -0
new file mode 100644
index 0000000..b25f4a5
@@ -0,0 +1,35 @@
+tty1
+tty2
+tty3
+tty4
+tty5
+tty6
+tty7
+tty8
+ttyS0
+ttyS1
+ttyS2
+ttyS3
+ttyAMA0
+ttyAMA1
+ttyAMA2
+ttyAMA3
+ttySAC0
+ttySAC1
+ttySAC2
+ttySAC3
+ttyUL0
+ttyUL1
+ttyUL2
+ttyUL3
+ttyPSC0
+ttyPSC1
+ttyPSC2
+ttyPSC3
+ttyCPM0
+ttyCPM1
+ttyCPM2
+ttyCPM3
+ttymxc0
+ttymxc1
+ttymxc2
fs/skeleton/default/etc/services new file +302 -0

302 lines not on this page · raw message

fs/skeleton/default/etc/shadow new file +12 -0
new file mode 100644
index 0000000..4941a1a
@@ -0,0 +1,12 @@
+root::10933:0:99999:7:::
+bin:*:10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+adm:*:10933:0:99999:7:::
+lp:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+shutdown:*:10933:0:99999:7:::
+halt:*:10933:0:99999:7:::
+uucp:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::
+default::10933:0:99999:7:::
fs/skeleton/default/home/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/lib/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/mnt/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/opt/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/proc/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/root/.bash_history new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/root/.bash_logout new file +7 -0
new file mode 100644
index 0000000..77ef1f9
@@ -0,0 +1,7 @@
+# ~/.bash_logout: executed by bash(1) when login shell exits.
+
+# when leaving the console clear the screen to increase privacy
+
+case "`tty`" in
+    /dev/tty[0-9]*) clear
+esac
fs/skeleton/default/root/.bash_profile new file +15 -0
new file mode 100644
index 0000000..27bf149
@@ -0,0 +1,15 @@
+# .bash_profile
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+umask 022
+
+if [ -f ~/.bashrc ]; then
+    source ~/.bashrc
+fi
fs/skeleton/default/root/.bashrc new file +48 -0

48 lines not on this page · raw message

fs/skeleton/default/root/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/sbin/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/sys/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/tmp/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/usr/bin/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/usr/lib/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/usr/sbin/.empty new file +0 -0
new file mode 100644
index 0000000..e69de29
fs/skeleton/default/usr/share/udhcpc/default.script new file +39 -0
new file mode 100755
index 0000000..a52a7f8
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# udhcpc script edited by Tim Riker <[email protected]>
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+case "$1" in
+	deconfig)
+		/sbin/ifconfig $interface 0.0.0.0
+		;;
+
+	renew|bound)
+		/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+		if [ -n "$router" ] ; then
+			echo "deleting routers"
+			while route del default gw 0.0.0.0 dev $interface ; do
+				:
+			done
+
+			for i in $router ; do
+				route add default gw $i dev $interface
+			done
+		fi
+
+		echo -n > $RESOLV_CONF
+		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+		for i in $dns ; do
+			echo adding dns $i
+			echo nameserver $i >> $RESOLV_CONF
+		done
+		;;
+esac
+
+exit 0
fs/skeleton/default/var/cache new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/lib/pcmcia new file +1 -0
new file mode 120000
index 0000000..f1fde8c
@@ -0,0 +1 @@
+../../tmp
\ No newline at end of file
fs/skeleton/default/var/lock new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/log new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/pcmcia new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/run new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/spool new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
fs/skeleton/default/var/tmp new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
package/busybox/Config.in +0 -6
index 68abf16..e0556ac 100644
@@ -79,12 +79,6 @@ config BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 	  Show packages in menuconfig that are potentially also provided
 	  by busybox.
 
-config BR2_PACKAGE_BUSYBOX_SKELETON
-	bool "use minimal target skeleton"
-	help
-	  Use a minimal target skeleton. Make sure to select mdev
-	  which is used to populate /dev/.
-
 endif
 
 if !BR2_PACKAGE_BUSYBOX # kconfig doesn't support else
package/busybox/busybox.mk +1 -1
index 668861d..7ed917a 100644
@@ -85,7 +85,7 @@ ifeq ($(BR2_PREFER_STATIC_LIB),y)
 else
 	$(SED) "s/^.*CONFIG_STATIC.*/CONFIG_STATIC=n/;" $(BUSYBOX_DIR)/.config
 endif
-ifeq ($(BR2_PACKAGE_BUSYBOX_SKELETON),y)
+ifeq ($(BR2_ROOTFS_SKELETON_BUSYBOX),y)
 	# force mdev on
 	$(SED) "s/^.*CONFIG_MDEV.*/CONFIG_MDEV=y/" $(BUSYBOX_DIR)/.config
 endif
target/generic/Makefile.in +0 -7
index 9a56f76..1ef2a9d 100644
@@ -1,10 +1,3 @@
-# Default target skeleton stuff, may be overridden
-TARGET_SKELETON=target/generic/target_skeleton
-
-ifeq ($(BR2_PACKAGE_BUSYBOX_SKELETON),y)
-TARGET_SKELETON=target/generic/target_busybox_skeleton
-endif
-
 TARGET_GENERIC_HOSTNAME:=$(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME))
 TARGET_GENERIC_ISSUE:=$(call qstrip,$(BR2_TARGET_GENERIC_ISSUE))
 TARGET_GENERIC_GETTY:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT))
target/generic/target_busybox_skeleton/dev/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/etc/TZ deleted +0 -1
deleted file mode 100644
index 9fcb2a3..0000000
@@ -1 +0,0 @@
-MST7MDT
target/generic/target_busybox_skeleton/etc/fstab deleted +0 -8
deleted file mode 100644
index 87d9da0..0000000
@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt>     <type>	<options>         <dump> <pass>
-/dev/root       /              ext2	rw,noauto         0      1
-proc		/proc	       proc     defaults	  0	 0
-devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
-tmpfs           /tmp           tmpfs    defaults          0      0
-sysfs		/sys	       sysfs    defaults	  0	 0
target/generic/target_busybox_skeleton/etc/group deleted +0 -16
deleted file mode 100644
index f78c22c..0000000
@@ -1,16 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-wheel:x:10:root
-utmp:x:43:
-staff:x:50:
-haldaemon:x:68:
-dbus:x:81:
-nobody:x:99:
-nogroup:x:99:
-users:x:100:
-default:x:1000:
target/generic/target_busybox_skeleton/etc/hostname deleted +0 -1
deleted file mode 100644
index 5b26b35..0000000
@@ -1 +0,0 @@
-buildroot
target/generic/target_busybox_skeleton/etc/hosts deleted +0 -1
deleted file mode 100644
index ba712fe..0000000
@@ -1 +0,0 @@
-127.0.0.1	localhost
target/generic/target_busybox_skeleton/etc/init.d/S20urandom deleted +0 -54

54 lines not on this page · raw message

target/generic/target_busybox_skeleton/etc/init.d/S40network deleted +0 -25
deleted file mode 100755
index ad6d250..0000000
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-case "$1" in
-  start)
- 	echo "Starting network..."
-	/sbin/ifup -a
-	;;
-  stop)
-	echo -n "Stopping network..."
-	/sbin/ifdown -a
-	;;
-  restart|reload)
-	"$0" stop
-	"$0" start
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-
target/generic/target_busybox_skeleton/etc/init.d/rcS deleted +0 -27
deleted file mode 100755
index de41153..0000000
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
-     # Ignore dangling symlinks (if any).
-     [ ! -f "$i" ] && continue
-
-     case "$i" in
-	*.sh)
-	    # Source shell script for speed.
-	    (
-		trap - INT QUIT TSTP
-		set start
-		. $i
-	    )
-	    ;;
-	*)
-	    # No sh extension, so fork subprocess.
-	    $i start
-	    ;;
-    esac
-done
-
target/generic/target_busybox_skeleton/etc/inittab deleted +0 -53

53 lines not on this page · raw message

target/generic/target_busybox_skeleton/etc/inputrc deleted +0 -44

44 lines not on this page · raw message

target/generic/target_busybox_skeleton/etc/issue deleted +0 -3
deleted file mode 100644
index 90f1779..0000000
@@ -1,3 +0,0 @@
-
-Welcome to Buildroot
-
target/generic/target_busybox_skeleton/etc/mtab deleted +0 -1
deleted file mode 120000
index e1c2045..0000000
@@ -1 +0,0 @@
-../proc/mounts
\ No newline at end of file
target/generic/target_busybox_skeleton/etc/network/interfaces deleted +0 -4
deleted file mode 100644
index 218b82c..0000000
@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
target/generic/target_busybox_skeleton/etc/passwd deleted +0 -15
deleted file mode 100644
index 377d4df..0000000
@@ -1,15 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
target/generic/target_busybox_skeleton/etc/profile deleted +0 -48

48 lines not on this page · raw message

target/generic/target_busybox_skeleton/etc/protocols deleted +0 -31
deleted file mode 100644
index 1ac8a40..0000000
@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
-rspf	73	RSPF		#Radio Shortest Path First.
-vmtp	81	VMTP		# Versatile Message Transport
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ipip	94	IPIP		# Yet Another IP encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation
target/generic/target_busybox_skeleton/etc/random-seed deleted binary +0 -0
deleted file mode 100644
index f26038adc5d057a0b9d6ce5d3cda02ccb4a4d12e..0000000000000000000000000000000000000000
GIT binary patch

zH?Zu5*rX8>4xpAvJIL$H4mg*!B4&9jh)7+B2j-fX7o at K*bzj;pJ$FwoQzl&MuZ^Wy zrYS)x9vq<)#e~&1uB|_ITW-fntEg1^KXs3>vvgL7?_kg!+6=fg{S7mwkr$#pm<zB( zu)oAUWFK-u-)cWcuSL*8$Q<cmC?ll~NEK@l5k|75(YzZ_p!I6FJ}YI_3>PZ13liCc zi|M+im&71p*p+Z|7f(m-aedNFtEezFN<xKEd-wQ71%XuGfKr+6VcDycMQ(v6+Z0G| z-MPjg@JHu%y(|h1cTa=a4(m?GyU)ZD-T+-vLXX}cCXyn}vCXC3Hn1ftzDTL(};Rr z?3wX?Eh5%n+AXAeDtXvl!o>-nZHytAhV~}?OM$-f$(%cG(ioV{==Ub4mfZP}OaJJ7 z25tvCcku=>;L?}O-dvK9}<^gmg@IrnfQm#P>RRF|C9c;GDgEg_bw26{dkIVt1{ z3#ol{Q_FL91TBD~{uZn<gw?^=VUuSaIf)=p07n=>RRZ(Otf!KXM&;q)8B<Q8(T)k z?Z}a{1Jyf~bQPL{qVQk6jFNfBr)0;57HwNo6Kw{wdPGHUWrfsJ}0VmW|Tr22whlO C+W_DI

target/generic/target_busybox_skeleton/etc/resolv.conf deleted +0 -1
deleted file mode 120000
index 71f6f96..0000000
@@ -1 +0,0 @@
-../tmp/resolv.conf
\ No newline@end of file
target/generic/target_busybox_skeleton/etc/securetty deleted +0 -35
deleted file mode 100644
index b25f4a5..0000000
@@ -1,35 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
-ttyAMA0
-ttyAMA1
-ttyAMA2
-ttyAMA3
-ttySAC0
-ttySAC1
-ttySAC2
-ttySAC3
-ttyUL0
-ttyUL1
-ttyUL2
-ttyUL3
-ttyPSC0
-ttyPSC1
-ttyPSC2
-ttyPSC3
-ttyCPM0
-ttyCPM1
-ttyCPM2
-ttyCPM3
-ttymxc0
-ttymxc1
-ttymxc2
target/generic/target_busybox_skeleton/etc/services deleted +0 -302

302 lines not on this page · raw message

target/generic/target_busybox_skeleton/etc/shadow deleted +0 -12
deleted file mode 100644
index 4941a1a..0000000
@@ -1,12 +0,0 @@
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::
target/generic/target_busybox_skeleton/proc/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/root/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/sys/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/tmp/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/usr/sbin/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_busybox_skeleton/var/cache deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/lib/pcmcia deleted +0 -1
deleted file mode 120000
index f1fde8c..0000000
@@ -1 +0,0 @@
-../../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/lock deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/log deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/pcmcia deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/run deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/spool deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_busybox_skeleton/var/tmp deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000
@@ -1 +0,0 @@
-../tmp
\ No newline at end of file
target/generic/target_skeleton/bin/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/dev/log deleted +0 -1
deleted file mode 120000
index d96b3b1..0000000
@@ -1 +0,0 @@
-../tmp/log
\ No newline at end of file
target/generic/target_skeleton/dev/pts/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/etc/TZ deleted +0 -1
deleted file mode 100644
index 9fcb2a3..0000000
@@ -1 +0,0 @@
-MST7MDT
target/generic/target_skeleton/etc/fstab deleted +0 -8
deleted file mode 100644
index 87d9da0..0000000
@@ -1,8 +0,0 @@
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt>     <type>	<options>         <dump> <pass>
-/dev/root       /              ext2	rw,noauto         0      1
-proc		/proc	       proc     defaults	  0	 0
-devpts		/dev/pts       devpts   defaults,gid=5,mode=620	  0	 0
-tmpfs           /tmp           tmpfs    defaults          0      0
-sysfs		/sys	       sysfs    defaults	  0	 0
target/generic/target_skeleton/etc/group deleted +0 -17
deleted file mode 100644
index c600be0..0000000
@@ -1,17 +0,0 @@
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-wheel:x:10:root
-utmp:x:43:
-staff:x:50:
-haldaemon:x:68:
-dbus:x:81:
-netdev:x:82:
-nobody:x:99:
-nogroup:x:99:
-users:x:100:
-default:x:1000:
target/generic/target_skeleton/etc/hostname deleted +0 -1
deleted file mode 100644
index 5b26b35..0000000
@@ -1 +0,0 @@
-buildroot
target/generic/target_skeleton/etc/hosts deleted +0 -1
deleted file mode 100644
index ba712fe..0000000
@@ -1 +0,0 @@
-127.0.0.1	localhost
target/generic/target_skeleton/etc/init.d/S20urandom deleted +0 -54

54 lines not on this page · raw message

target/generic/target_skeleton/etc/init.d/S40network deleted +0 -25
deleted file mode 100755
index ad6d250..0000000
@@ -1,25 +0,0 @@
-#!/bin/sh
-#
-# Start the network....
-#
-
-case "$1" in
-  start)
- 	echo "Starting network..."
-	/sbin/ifup -a
-	;;
-  stop)
-	echo -n "Stopping network..."
-	/sbin/ifdown -a
-	;;
-  restart|reload)
-	"$0" stop
-	"$0" start
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-
target/generic/target_skeleton/etc/init.d/rcS deleted +0 -27
deleted file mode 100755
index de41153..0000000
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
-     # Ignore dangling symlinks (if any).
-     [ ! -f "$i" ] && continue
-
-     case "$i" in
-	*.sh)
-	    # Source shell script for speed.
-	    (
-		trap - INT QUIT TSTP
-		set start
-		. $i
-	    )
-	    ;;
-	*)
-	    # No sh extension, so fork subprocess.
-	    $i start
-	    ;;
-    esac
-done
-
target/generic/target_skeleton/etc/inittab deleted +0 -48

48 lines not on this page · raw message

target/generic/target_skeleton/etc/inputrc deleted +0 -44

44 lines not on this page · raw message

target/generic/target_skeleton/etc/issue deleted +0 -3
deleted file mode 100644
index 90f1779..0000000
@@ -1,3 +0,0 @@
-
-Welcome to Buildroot
-
target/generic/target_skeleton/etc/ld.so.conf.d/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/etc/mtab deleted +0 -1
deleted file mode 120000
index e1c2045..0000000
@@ -1 +0,0 @@
-../proc/mounts
\ No newline at end of file
target/generic/target_skeleton/etc/network/interfaces deleted +0 -4
deleted file mode 100644
index 218b82c..0000000
@@ -1,4 +0,0 @@
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
target/generic/target_skeleton/etc/passwd deleted +0 -15
deleted file mode 100644
index 377d4df..0000000
@@ -1,15 +0,0 @@
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
target/generic/target_skeleton/etc/profile deleted +0 -48

48 lines not on this page · raw message

target/generic/target_skeleton/etc/protocols deleted +0 -31
deleted file mode 100644
index 1ac8a40..0000000
@@ -1,31 +0,0 @@
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip	0	IP		# internet protocol, pseudo protocol number
-icmp	1	ICMP		# internet control message protocol
-igmp	2	IGMP		# Internet Group Management
-ggp	3	GGP		# gateway-gateway protocol
-ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
-st	5	ST		# ST datagram mode
-tcp	6	TCP		# transmission control protocol
-egp	8	EGP		# exterior gateway protocol
-pup	12	PUP		# PARC universal packet protocol
-udp	17	UDP		# user datagram protocol
-hmp	20	HMP		# host monitoring protocol
-xns-idp	22	XNS-IDP		# Xerox NS IDP
-rdp	27	RDP		# "reliable datagram" protocol
-iso-tp4	29	ISO-TP4		# ISO Transport Protocol class 4
-xtp	36	XTP		# Xpress Tranfer Protocol
-ddp	37	DDP		# Datagram Delivery Protocol
-idpr-cmtp	39	IDPR-CMTP	# IDPR Control Message Transport
-rspf	73	RSPF		#Radio Shortest Path First.
-vmtp	81	VMTP		# Versatile Message Transport
-ospf	89	OSPFIGP		# Open Shortest Path First IGP
-ipip	94	IPIP		# Yet Another IP encapsulation
-encap	98	ENCAP		# Yet Another IP encapsulation
target/generic/target_skeleton/etc/random-seed deleted binary +0 -0
deleted file mode 100644
index f26038adc5d057a0b9d6ce5d3cda02ccb4a4d12e..0000000000000000000000000000000000000000
GIT binary patch

zH?Zu5*rX8>4xpAvJIL$H4mg*!B4&9jh)7+B2j-fX7o at K*bzj;pJ$FwoQzl&MuZ^Wy zrYS)x9vq<)#e~&1uB|_ITW-fntEg1^KXs3>vvgL7?_kg!+6=fg{S7mwkr$#pm<zB( zu)oAUWFK-u-)cWcuSL*8$Q<cmC?ll~NEK@l5k|75(YzZ_p!I6FJ}YI_3>PZ13liCc zi|M+im&71p*p+Z|7f(m-aedNFtEezFN<xKEd-wQ71%XuGfKr+6VcDycMQ(v6+Z0G| z-MPjg@JHu%y(|h1cTa=a4(m?GyU)ZD-T+-vLXX}cCXyn}vCXC3Hn1ftzDTL(};Rr z?3wX?Eh5%n+AXAeDtXvl!o>-nZHytAhV~}?OM$-f$(%cG(ioV{==Ub4mfZP}OaJJ7 z25tvCcku=>;L?}O-dvK9}<^gmg@IrnfQm#P>RRF|C9c;GDgEg_bw26{dkIVt1{ z3#ol{Q_FL91TBD~{uZn<gw?^=VUuSaIf)=p07n=>RRZ(Otf!KXM&;q)8B<Q8(T)k z?Z}a{1Jyf~bQPL{qVQk6jFNfBr)0;57HwNo6Kw{wdPGHUWrfsJ}0VmW|Tr22whlO C+W_DI

target/generic/target_skeleton/etc/resolv.conf deleted +0 -1
deleted file mode 120000
index 71f6f96..0000000
@@ -1 +0,0 @@
-../tmp/resolv.conf
\ No newline@end of file
target/generic/target_skeleton/etc/securetty deleted +0 -35
deleted file mode 100644
index b25f4a5..0000000
@@ -1,35 +0,0 @@
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
-ttyAMA0
-ttyAMA1
-ttyAMA2
-ttyAMA3
-ttySAC0
-ttySAC1
-ttySAC2
-ttySAC3
-ttyUL0
-ttyUL1
-ttyUL2
-ttyUL3
-ttyPSC0
-ttyPSC1
-ttyPSC2
-ttyPSC3
-ttyCPM0
-ttyCPM1
-ttyCPM2
-ttyCPM3
-ttymxc0
-ttymxc1
-ttymxc2
target/generic/target_skeleton/etc/services deleted +0 -302

175 lines not on this page · raw message

target/generic/target_skeleton/etc/shadow deleted +0 -12
deleted file mode 100644
index 4941a1a..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/home/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/lib/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/mnt/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/opt/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/proc/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/root/.bash_history deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/root/.bash_logout deleted +0 -7
deleted file mode 100644
index 77ef1f9..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/root/.bash_profile deleted +0 -15
deleted file mode 100644
index 27bf149..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/root/.bashrc deleted +0 -48

48 lines not on this page · raw message

target/generic/target_skeleton/root/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/sbin/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/sys/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/tmp/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/usr/bin/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/usr/lib/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/usr/sbin/.empty deleted +0 -0
deleted file mode 100644
index e69de29..0000000
target/generic/target_skeleton/usr/share/udhcpc/default.script deleted +0 -39
deleted file mode 100755
index a52a7f8..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/cache deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/lib/pcmcia deleted +0 -1
deleted file mode 120000
index f1fde8c..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/lock deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/log deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/pcmcia deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/run deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/spool deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

target/generic/target_skeleton/var/tmp deleted +0 -1
deleted file mode 120000
index 1431b0e..0000000

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.1

Part of the diff is not shown here. View the raw message.

#1 lore raw

PATCH 1/1 target skeleton definition

Hello Dmytro,

Quoted 3 lines · On Mon, 7 Jun 2010 21:06:42 +0300 Dmytro Milinevskyy <[email protected]>…

Here's the patch to give posibility to redefine path to the rootfs skeleton. Also this patch moves default and busybox skeleton trees into fs/skeleton dir.

Thanks for this patch. In general, this is something I intended to do, so it's great to see patches implementing this.

Personaly, I'd prefer if we could get rid of the "busybox" skeleton altogether. I think Peter Korsgaard agreed with this decision, but I'll let him restate his preference here.

If Peter agrees, then the skeleton could be moved to just fs/skeleton/.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#2 lore raw

PATCH 1/1 target skeleton definition

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Hello Dmytro,
Thomas> On Mon, 7 Jun 2010 21:06:42 +0300

Quoted 3 lines · Thomas> Dmytro Milinevskyy <[email protected]> wrote:
Quoted 3 lines

Here's the patch to give posibility to redefine path to the rootfs skeleton. Also this patch moves default and busybox skeleton trees into fs/skeleton dir.

Thomas> Thanks for this patch. In general, this is something I intended to do, Thomas> so it's great to see patches implementing this.

Thomas> Personaly, I'd prefer if we could get rid of the "busybox" skeleton Thomas> altogether. I think Peter Korsgaard agreed with this decision, but I'll Thomas> let him restate his preference here.

Yes, I think now would be a good moment to cleanup this stuff.

Thomas> If Peter agrees, then the skeleton could be moved to just fs/skeleton/.

Signature · 1 line
Bye, Peter Korsgaard
author
#3 lore raw

PATCH 1/1 target skeleton definition

Thomas, Peter,

some targets depend on busybox skeleton. Are you sure it's safe to remove it completely?

-- Dima

Quoted 28 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

?Thomas> Hello Dmytro,
?Thomas> On Mon, 7 Jun 2010 21:06:42 +0300 ?Thomas> Dmytro Milinevskyy <[email protected]> wrote:

?>> Here's the patch to give posibility to redefine path to the rootfs ?>> skeleton. Also this patch moves default and busybox skeleton trees ?>> into fs/skeleton dir.

?Thomas> Thanks for this patch. In general, this is something I intended to do, ?Thomas> so it's great to see patches implementing this.

?Thomas> Personaly, I'd prefer if we could get rid of the "busybox" skeleton ?Thomas> altogether. I think Peter Korsgaard agreed with this decision, but I'll ?Thomas> let him restate his preference here.

Yes, I think now would be a good moment to cleanup this stuff.

?Thomas> If Peter agrees, then the skeleton could be moved to just fs/skeleton/.

--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#4 lore raw

PATCH 1/1 target skeleton definition

In reply to Peter Korsgaard
Quoted 5 lines · On Mon, 07 Jun 2010 23:17:59 +0200 Peter Korsgaard <[email protected]> wrote:

Thomas> Personaly, I'd prefer if we could get rid of the "busybox" Thomas> skeleton altogether. I think Peter Korsgaard agreed with Thomas> this decision, but I'll let him restate his preference here.

Yes, I think now would be a good moment to cleanup this stuff.

So, Dmytro, could you update your patch to remove the busybox skeleton, and just put the default skeleton in fs/skeleton ?

You could indeed split it in two patches:

* One doing the skeleton move

* One adding the option to configure the skeleton

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#5 lore raw

PATCH 1/1 target skeleton definition

Thomas, I will rework the patch according to your suggestions. Should targets that depend on busybox skeleton use default one?

-- Dima

Quoted 31 lines · Thomas Petazzoni
Quoted 5 lines · On Mon, 07 Jun 2010 23:17:59 +0200 Peter Korsgaard <[email protected]> wrote:

?Thomas> Personaly, I'd prefer if we could get rid of the "busybox" ?Thomas> skeleton altogether. I think Peter Korsgaard agreed with ?Thomas> this decision, but I'll let him restate his preference here.

Yes, I think now would be a good moment to cleanup this stuff.

So, Dmytro, could you update your patch to remove the busybox skeleton, and just put the default skeleton in fs/skeleton ?

You could indeed split it in two patches:

?* One doing the skeleton move

?* One adding the option to configure the skeleton

Thanks,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

author
#6 lore raw

PATCH 1/1 target skeleton definition

Thomas, what should be done w/ target that depend on busybox skeleton?

-- Dima

Quoted 39 lines · Dmytro Milinevskyy

Thomas, I will rework the patch according to your suggestions. Should targets that depend on busybox skeleton use default one?

-- Dima

Quoted 31 lines · Thomas Petazzoni
Quoted 5 lines · On Mon, 07 Jun 2010 23:17:59 +0200 Peter Korsgaard <[email protected]> wrote:

?Thomas> Personaly, I'd prefer if we could get rid of the "busybox" ?Thomas> skeleton altogether. I think Peter Korsgaard agreed with ?Thomas> this decision, but I'll let him restate his preference here.

Yes, I think now would be a good moment to cleanup this stuff.

So, Dmytro, could you update your patch to remove the busybox skeleton, and just put the default skeleton in fs/skeleton ?

You could indeed split it in two patches:

?* One doing the skeleton move

?* One adding the option to configure the skeleton

Thanks,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#7 lore raw

PATCH 1/1 target skeleton definition

Quoted 1 line · On Tue, 8 Jun 2010 22:54:31 +0300 Dmytro Milinevskyy <[email protected]>…

Thomas, what should be done w/ target that depend on busybox skeleton?

I'd say: just convert them over to the normal skeleton.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#8 lore raw

PATCH 1/1 target skeleton definition

Ok, I will do that.

-- Dima

Quoted 18 lines · Thomas Petazzoni
Quoted 1 line · On Tue, 8 Jun 2010 22:54:31 +0300 Dmytro Milinevskyy <[email protected]>…

Thomas, what should be done w/ target that depend on busybox skeleton?

I'd say: just convert them over to the normal skeleton.

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#9 lore raw

PATCH 1/1 target skeleton definition

In reply to Dmytro Milinevskyy
Quoted 3 lines · On Mon, 7 Jun 2010 21:06:42 +0300 Dmytro Milinevskyy <[email protected]>…

Here's the patch to give posibility to redefine path to the rootfs skeleton. Also this patch moves default and busybox skeleton trees into fs/skeleton dir.

And also: the final patch would need a slightly better description.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#10 lore raw

PATCH 1/1 target skeleton definition

Hi Thomas.

I agree that the patch name is not the best. Also I thought to divide this into few patch series.

Regards

-- Dima

Quoted 20 lines · Thomas Petazzoni
Quoted 3 lines · On Mon, 7 Jun 2010 21:06:42 +0300 Dmytro Milinevskyy <[email protected]>…

Here's the patch to give posibility to redefine path to the rootfs skeleton. Also this patch moves default and busybox skeleton trees into fs/skeleton dir.

And also: the final patch would need a slightly better description.

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot