Kirkwood: Add support for HP t5325 Thin Client
Subsystems (2)
PATCH 1/1 Kirkwood: Add support for HP t5325 Thin Client
Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU.
Signed-off-by Martin Michlmayr <[email protected]>
---
This patch doesn't take Saeed's PCI changes into account; also, it requires a mach-types update to build.
arch/arm/mach-kirkwood/Kconfig +6 -0
@@ -99,6 +99,12 @@ config MACH_NET5BIG_V2 Say 'Y' here if you want your kernel to support the LaCie 5Big Network v2 NAS. +config MACH_T5325 + bool "HP t5325 Thin Client" + help + Say 'Y' here if you want your kernel to support the + HP t5325 Thin Client. + endmenu endif
arch/arm/mach-kirkwood/Makefile +1 -0
@@ -14,5 +14,6 @@ obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o
arch/arm/mach-kirkwood/t5325-setup.c new file +194 -0
194 lines not on this page · raw message
Signature · 2 lines
Martin Michlmayr http://www.cyrius.com/