Compiling U-Boot for OMAP 3530 Thunder with network support
How do I compile U-Boot for the OMAP 3530 Thunder board with network support? The latest official U-Boot tarball seems to lack the omap3_thunder_config option, which is included in the TechNexion release. But even using the latter release, how do I configure network (NFS, TFTP) support for the SMSC 9500 USB/Ethernet controller?
Thank you for any help.
Alex
Dear cactus.fossil at googlemail.com,
Quoted 5 lines · In message <[email protected]> you wrote:
How do I compile U-Boot for the OMAP 3530 Thunder board with network support? The latest official U-Boot tarball seems to lack the
omap3_thunder_configoption, which is included in the TechNexion release. But even using the latter release, how do I configure network (NFS, TFTP) support for the SMSC 9500 USB/Ethernet controller?
Unfortunately TechNexion never submitted any of their work upstream for inclusion into the mainline repository (not for U-Boot, and neither for the Linux kernel).
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Extended Epstein-Heisenberg Principle: In an R & D orbit, only 2 of the existing 3 parameters can be defined simultaneously. The parame- ters are: task, time and resources ($).