cxgb4vf: Add main T4 PCI-E SR-IOV Virtual Function driver for cxgb4vf

new file mode 100644
index 0000000..8ea0196
@@ -0,0 +1,540 @@
+/*
+ * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
+ * driver for Linux.
+ *
+ * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file should not be included directly.  Include t4vf_common.h instead.
+ */
+
+#ifndef __CXGB4VF_ADAPTER_H__
+#define __CXGB4VF_ADAPTER_H__
+
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+
+#include "../cxgb4/t4_hw.h"
+
+/*
+ * Constants of the implementation.
+ */
+enum {
+	MAX_NPORTS	= 1,		/* max # of "ports" */
+	MAX_PORT_QSETS	= 8,		/* max # of Queue Sets / "port" */
+	MAX_ETH_QSETS	= MAX_NPORTS*MAX_PORT_QSETS,
+
+	/*
+	 * MSI-X interrupt index usage.
+	 */
+	MSIX_FW		= 0,		/* MSI-X index for firmware Q */
+	MSIX_NIQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
+	MSIX_EXTRAS	= 1,
+	MSIX_ENTRIES	= MAX_ETH_QSETS + MSIX_EXTRAS,
+
+	/*
+	 * The maximum number of Ingress and Egress Queues is determined by
+	 * the maximum number of "Queue Sets" which we support plus any
+	 * ancillary queues.  Each "Queue Set" requires one Ingress Queue
+	 * for RX Packet Ingress Event notifications and two Egress Queues for
+	 * a Free List and an Ethernet TX list.
+	 */
+	INGQ_EXTRAS	= 2,		/* firmware event queue and */
+					/*   forwarded interrupts */
+	MAX_INGQ	= MAX_ETH_QSETS+INGQ_EXTRAS,
+	MAX_EGRQ	= MAX_ETH_QSETS*2,
+};
+
+/*
+ * Forward structure definition references.
+ */
+struct adapter;
+struct sge_eth_rxq;
+struct sge_rspq;
+
+/*
+ * Per-"port" information.  This is really per-Virtual Interface information
+ * but the use of the "port" nomanclature makes it easier to go back and forth
+ * between the PF and VF drivers ...
+ */
+struct port_info {
+	struct adapter *adapter;	/* our adapter */
+	struct vlan_group *vlan_grp;	/* out VLAN group */
+	u16 viid;			/* virtual interface ID */
+	s16 xact_addr_filt;		/* index of our MAC address filter */
+	u16 rss_size;			/* size of VI's RSS table slice */
+	u8 pidx;			/* index into adapter port[] */
+	u8 port_id;			/* physical port ID */
+	u8 rx_offload;			/* CSO, etc. */
+	u8 nqsets;			/* # of "Queue Sets" */
+	u8 first_qset;			/* index of first "Queue Set" */
+	struct link_config link_cfg;	/* physical port configuration */
+};
+
+/* port_info.rx_offload flags */
+enum {
+	RX_CSO = 1 << 0,
+};
+
+/*
+ * Scatter Gather Engine resources for the "adapter".  Our ingress and egress
+ * queues are organized into "Queue Sets" with one ingress and one egress
+ * queue per Queue Set.  These Queue Sets are aportionable between the "ports"
+ * (Virtual Interfaces).  One extra ingress queue is used to receive
+ * asynchronous messages from the firmware.  Note that the "Queue IDs" that we
+ * use here are really "Relative Queue IDs" which are returned as part of the
+ * firmware command to allocate queues.  These queue IDs are relative to the
+ * absolute Queue ID base of the section of the Queue ID space allocated to
+ * the PF/VF.
+ */
+
+/*
+ * SGE free-list queue state.
+ */
+struct rx_sw_desc;
+struct sge_fl {
+	unsigned int avail;		/* # of available RX buffers */
+	unsigned int pend_cred;		/* new buffers since last FL DB ring */
+	unsigned int cidx;		/* consumer index */
+	unsigned int pidx;		/* producer index */
+	unsigned long alloc_failed;	/* # of buffer allocation failures */
+	unsigned long large_alloc_failed;
+	unsigned long starving;		/* # of times FL was found starving */
+
+	/*
+	 * Write-once/infrequently fields.
+	 * -------------------------------
+	 */
+
+	unsigned int cntxt_id;		/* SGE relative QID for the free list */
+	unsigned int abs_id;		/* SGE absolute QID for the free list */
+	unsigned int size;		/* capacity of free list */
+	struct rx_sw_desc *sdesc;	/* address of SW RX descriptor ring */
+	__be64 *desc;			/* address of HW RX descriptor ring */
+	dma_addr_t addr;		/* PCI bus address of hardware ring */
+};
+
+/*
+ * An ingress packet gather list.
+ */
+struct pkt_gl {
+	skb_frag_t frags[MAX_SKB_FRAGS];
+	void *va;			/* virtual address of first byte */
+	unsigned int nfrags;		/* # of fragments */
+	unsigned int tot_len;		/* total length of fragments */
+};
+
+typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *,
+			      const struct pkt_gl *);
+
+/*
+ * State for an SGE Response Queue.
+ */
+struct sge_rspq {
+	struct napi_struct napi;	/* NAPI scheduling control */
+	const __be64 *cur_desc;		/* current descriptor in queue */
+	unsigned int cidx;		/* consumer index */
+	u8 gen;				/* current generation bit */
+	u8 next_intr_params;		/* holdoff params for next interrupt */
+	int offset;			/* offset into current FL buffer */
+
+	unsigned int unhandled_irqs;	/* bogus interrupts */
+
+	/*
+	 * Write-once/infrequently fields.
+	 * -------------------------------
+	 */
+
+	u8 intr_params;			/* interrupt holdoff parameters */
+	u8 pktcnt_idx;			/* interrupt packet threshold */
+	u8 idx;				/* queue index within its group */
+	u16 cntxt_id;			/* SGE rel QID for the response Q */
+	u16 abs_id;			/* SGE abs QID for the response Q */
+	__be64 *desc;			/* address of hardware response ring */
+	dma_addr_t phys_addr;		/* PCI bus address of ring */
+	unsigned int iqe_len;		/* entry size */
+	unsigned int size;		/* capcity of response Q */
+	struct adapter *adapter;	/* our adapter */
+	struct net_device *netdev;	/* associated net device */
+	rspq_handler_t handler;		/* the handler for this response Q */
+};
+
+/*
+ * Ethernet queue statistics
+ */
+struct sge_eth_stats {
+	unsigned long pkts;		/* # of ethernet packets */
+	unsigned long lro_pkts;		/* # of LRO super packets */
+	unsigned long lro_merged;	/* # of wire packets merged by LRO */
+	unsigned long rx_cso;		/* # of Rx checksum offloads */
+	unsigned long vlan_ex;		/* # of Rx VLAN extractions */
+	unsigned long rx_drops;		/* # of packets dropped due to no mem */
+};
+
+/*
+ * State for an Ethernet Receive Queue.
+ */
+struct sge_eth_rxq {
+	struct sge_rspq rspq;		/* Response Queue */
+	struct sge_fl fl;		/* Free List */
+	struct sge_eth_stats stats;	/* receive statistics */
+};
+
+/*
+ * SGE Transmit Queue state.  This contains all of the resources associated
+ * with the hardware status of a TX Queue which is a circular ring of hardware
+ * TX Descriptors.  For convenience, it also contains a pointer to a parallel
+ * "Software Descriptor" array but we don't know anything about it here other
+ * than its type name.
+ */
+struct tx_desc {
+	/*
+	 * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the
+	 * hardware: Sizes, Producer and Consumer indices, etc.
+	 */
+	__be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)];
+};
+struct tx_sw_desc;
+struct sge_txq {
+	unsigned int in_use;		/* # of in-use TX descriptors */
+	unsigned int size;		/* # of descriptors */
+	unsigned int cidx;		/* SW consumer index */
+	unsigned int pidx;		/* producer index */
+	unsigned long stops;		/* # of times queue has been stopped */
+	unsigned long restarts;		/* # of queue restarts */
+
+	/*
+	 * Write-once/infrequently fields.
+	 * -------------------------------
+	 */
+
+	unsigned int cntxt_id;		/* SGE relative QID for the TX Q */
+	unsigned int abs_id;		/* SGE absolute QID for the TX Q */
+	struct tx_desc *desc;		/* address of HW TX descriptor ring */
+	struct tx_sw_desc *sdesc;	/* address of SW TX descriptor ring */
+	struct sge_qstat *stat;		/* queue status entry */
+	dma_addr_t phys_addr;		/* PCI bus address of hardware ring */
+};
+
+/*
+ * State for an Ethernet Transmit Queue.
+ */
+struct sge_eth_txq {
+	struct sge_txq q;		/* SGE TX Queue */
+	struct netdev_queue *txq;	/* associated netdev TX queue */
+	unsigned long tso;		/* # of TSO requests */
+	unsigned long tx_cso;		/* # of TX checksum offloads */
+	unsigned long vlan_ins;		/* # of TX VLAN insertions */
+	unsigned long mapping_err;	/* # of I/O MMU packet mapping errors */
+};
+
+/*
+ * The complete set of Scatter/Gather Engine resources.
+ */
+struct sge {
+	/*
+	 * Our "Queue Sets" ...
+	 */
+	struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
+	struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
+
+	/*
+	 * Extra ingress queues for asynchronous firmware events and
+	 * forwarded interrupts (when in MSI mode).
+	 */
+	struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
+
+	struct sge_rspq intrq ____cacheline_aligned_in_smp;
+	spinlock_t intrq_lock;
+
+	/*
+	 * State for managing "starving Free Lists" -- Free Lists which have
+	 * fallen below a certain threshold of buffers available to the
+	 * hardware and attempts to refill them up to that threshold have
+	 * failed.  We have a regular "slow tick" timer process which will
+	 * make periodic attempts to refill these starving Free Lists ...
+	 */
+	DECLARE_BITMAP(starving_fl, MAX_EGRQ);
+	struct timer_list rx_timer;
+
+	/*
+	 * State for cleaning up completed TX descriptors.
+	 */
+	struct timer_list tx_timer;
+
+	/*
+	 * Write-once/infrequently fields.
+	 * -------------------------------
+	 */
+
+	u16 max_ethqsets;		/* # of available Ethernet queue sets */
+	u16 ethqsets;			/* # of active Ethernet queue sets */
+	u16 ethtxq_rover;		/* Tx queue to clean up next */
+	u16 timer_val[SGE_NTIMERS];	/* interrupt holdoff timer array */
+	u8 counter_val[SGE_NCOUNTERS];	/* interrupt RX threshold array */
+
+	/*
+	 * Reverse maps from Absolute Queue IDs to associated queue pointers.
+	 * The absolute Queue IDs are in a compact range which start at a
+	 * [potentially large] Base Queue ID.  We perform the reverse map by
+	 * first converting the Absolute Queue ID into a Relative Queue ID by
+	 * subtracting off the Base Queue ID and then use a Relative Queue ID
+	 * indexed table to get the pointer to the corresponding software
+	 * queue structure.
+	 */
+	unsigned int egr_base;
+	unsigned int ingr_base;
+	void *egr_map[MAX_EGRQ];
+	struct sge_rspq *ingr_map[MAX_INGQ];
+};
+
+/*
+ * Utility macros to convert Absolute- to Relative-Queue indices and Egress-
+ * and Ingress-Queues.  The EQ_MAP() and IQ_MAP() macros which provide
+ * pointers to Ingress- and Egress-Queues can be used as both L- and R-values
+ */
+#define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base))
+#define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base))
+
+#define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)])
+#define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)])
+
+/*
+ * Macro to iterate across Queue Sets ("rxq" is a historic misnomer).
+ */
+#define for_each_ethrxq(sge, iter) \
+	for (iter = 0; iter < (sge)->ethqsets; iter++)
+
+/*
+ * Per-"adapter" (Virtual Function) information.
+ */
+struct adapter {
+	/* PCI resources */
+	void __iomem *regs;
+	struct pci_dev *pdev;
+	struct device *pdev_dev;
+
+	/* "adapter" resources */
+	unsigned long registered_device_map;
+	unsigned long open_device_map;
+	unsigned long flags;
+	struct adapter_params params;
+
+	/* queue and interrupt resources */
+	struct {
+		unsigned short vec;
+		char desc[22];
+	} msix_info[MSIX_ENTRIES];
+	struct sge sge;
+
+	/* Linux network device resources */
+	struct net_device *port[MAX_NPORTS];
+	const char *name;
+	unsigned int msg_enable;
+
+	/* debugfs resources */
+	struct dentry *debugfs_root;
+
+	/* various locks */
+	spinlock_t stats_lock;
+};
+
+enum { /* adapter flags */
+	FULL_INIT_DONE     = (1UL << 0),
+	USING_MSI          = (1UL << 1),
+	USING_MSIX         = (1UL << 2),
+	QUEUES_BOUND       = (1UL << 3),
+};
+
+/*
+ * The following register read/write routine definitions are required by
+ * the common code.
+ */
+
+/**
+ * t4_read_reg - read a HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ *
+ * Returns the 32-bit value of the given HW register.
+ */
+static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr)
+{
+	return readl(adapter->regs + reg_addr);
+}
+
+/**
+ * t4_write_reg - write a HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ * @val: the value to write
+ *
+ * Write a 32-bit value into the given HW register.
+ */
+static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
+{
+	writel(val, adapter->regs + reg_addr);
+}
+
+#ifndef readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+	return readl(addr) + ((u64)readl(addr + 4) << 32);
+}
+
+static inline void writeq(u64 val, volatile void __iomem *addr)
+{
+	writel(val, addr);
+	writel(val >> 32, addr + 4);
+}
+#endif
+
+/**
+ * t4_read_reg64 - read a 64-bit HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ *
+ * Returns the 64-bit value of the given HW register.
+ */
+static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr)
+{
+	return readq(adapter->regs + reg_addr);
+}
+
+/**
+ * t4_write_reg64 - write a 64-bit HW register
+ * @adapter: the adapter
+ * @reg_addr: the register address
+ * @val: the value to write
+ *
+ * Write a 64-bit value into the given HW register.
+ */
+static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
+				  u64 val)
+{
+	writeq(val, adapter->regs + reg_addr);
+}
+
+/**
+ * port_name - return the string name of a port
+ * @adapter: the adapter
+ * @pidx: the port index
+ *
+ * Return the string name of the selected port.
+ */
+static inline const char *port_name(struct adapter *adapter, int pidx)
+{
+	return adapter->port[pidx]->name;
+}
+
+/**
+ * t4_os_set_hw_addr - store a port's MAC address in SW
+ * @adapter: the adapter
+ * @pidx: the port index
+ * @hw_addr: the Ethernet address
+ *
+ * Store the Ethernet address of the given port in SW.  Called by the common
+ * code when it retrieves a port's Ethernet address from EEPROM.
+ */
+static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx,
+				     u8 hw_addr[])
+{
+	memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN);
+	memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN);
+}
+
+/**
+ * netdev2pinfo - return the port_info structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct port_info associated with a net_device
+ */
+static inline struct port_info *netdev2pinfo(const struct net_device *dev)
+{
+	return netdev_priv(dev);
+}
+
+/**
+ * adap2pinfo - return the port_info of a port
+ * @adap: the adapter
+ * @pidx: the port index
+ *
+ * Return the port_info structure for the adapter.
+ */
+static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx)
+{
+	return netdev_priv(adapter->port[pidx]);
+}
+
+/**
+ * netdev2adap - return the adapter structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct adapter associated with a net_device
+ */
+static inline struct adapter *netdev2adap(const struct net_device *dev)
+{
+	return netdev2pinfo(dev)->adapter;
+}
+
+/*
+ * OS "Callback" function declarations.  These are functions that the OS code
+ * is "contracted" to provide for the common code.
+ */
+void t4vf_os_link_changed(struct adapter *, int, int);
+
+/*
+ * SGE function prototype declarations.
+ */
+int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool,
+		       struct net_device *, int,
+		       struct sge_fl *, rspq_handler_t);
+int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *,
+			   struct net_device *, struct netdev_queue *,
+			   unsigned int);
+void t4vf_free_sge_resources(struct adapter *);
+
+int t4vf_eth_xmit(struct sk_buff *, struct net_device *);
+int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *,
+		       const struct pkt_gl *);
+
+irq_handler_t t4vf_intr_handler(struct adapter *);
+irqreturn_t t4vf_sge_intr_msix(int, void *);
+
+int t4vf_sge_init(struct adapter *);
+void t4vf_sge_start(struct adapter *);
+void t4vf_sge_stop(struct adapter *);
+
+#endif /* __CXGB4VF_ADAPTER_H__ */

2,460 lines not on this page · raw message