u-boot-2010.06-rc3 to AT91rm9200dk

Hi,

I have compiled Uboot version u-boot-2010.06-rc3 and I got bin file .

I tried it to download bin file to at91rm9200dk board it stops after some time witth error .
I think this is due to insufficient of SRAM capability ie 16KB SRAM uboot size is 107KB
How to download this uboot directly to flash ...location any other configurtion in uboot for this . . Wherther Romboot is required ..?

With Thanks
Rajeesh.R |

Dear Rajeesh.R,

Am 28.06.2010 06:51, schrieb Rajeesh.R:

How did you try to load the file to your device?

I think you have chosen the BOOTROM based upload via xmodem cause you talk about SRAM size which does not matter if you boot from NOR flash on CS0.

Use an JTAG ... as recommended by Wolfgang
(http://lists.denx.de/pipermail/u-boot/2010-June/073191.html)

You can do it with some effort ... You may tinker an first stage (bootstrap) loader to initialize your SDRAM and NOR flash which is sufficient to load the U-Boot via xmodem to write it in NOR flash. Another requirement for that part of software is to be small enough to fit in SRAM.
Some people did this before, search google for "at91rm9200 xloader" or "at91rm9200 bootstrap" but I also recommend to get an JTAG and flash your NOR that way.

regards

Andreas Bie?mann

Dear "Rajeesh.R",

I have answered all these questions previously. Please re-read my previous postings.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"This isn't brain surgery; it's just television."   - David Letterman