ppc4xx: Add T3COPR board support (PPC460GT based)
PATCH v3 1/1 ppc4xx: Add T3COPR board support (PPC460GT based)
This patch adds support for the T3CORP board, based on the AppliedMicro (APM) PPC460GT.
---
v3: - Changed AMCC to APM
- Removed unnecessary code for 128MiB flash
- Changed spelling: FLASH -> flash
v2: - Fixed spelling: fibre -> fiber
- Rebased on next, no changes to toplevel Makefile needed anymore
MAINTAINERS | 1 + MAKEALL | 1 + board/t3corp/Makefile | 53 +++++ board/t3corp/chip_config.c | 59 +++++ board/t3corp/config.mk | 39 ++++ board/t3corp/init.S | 99 ++++++++ board/t3corp/t3corp.c | 193 ++++++++++++++++ boards.cfg | 1 + include/configs/t3corp.h | 544 ++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 990 insertions(+), 0 deletions(-) create mode 100644 board/t3corp/Makefile create mode 100644 board/t3corp/chip_config.c create mode 100644 board/t3corp/config.mk create mode 100644 board/t3corp/init.S create mode 100644 board/t3corp/t3corp.c create mode 100644 include/configs/t3corp.h
MAINTAINERS +1 -0
@@ -392,6 +392,7 @@ Stefan Roese <[email protected]> rainier PPC440GRx sequoia PPC440EPx sycamore PPC405GPr + t3corp PPC460GT taishan PPC440GX walnut PPC405GP yellowstone PPC440GR
MAKEALL +1 -0
@@ -262,6 +262,7 @@ LIST_4xx=" \ sc3 \ sequoia \ sequoia_nand \ + t3corp \ taihu \ taishan \ v5fx30teval \
board/t3corp/Makefile new file +53 -0
53 lines not on this page · raw message
board/t3corp/chip_config.c new file +59 -0
59 lines not on this page · raw message
board/t3corp/config.mk new file +39 -0
@@ -0,0 +1,39 @@ +# +# (C) Copyright 2010 +# Stefan Roese, DENX Software Engineering, sr at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFA0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 +endif
board/t3corp/init.S new file +99 -0
99 lines not on this page · raw message
board/t3corp/t3corp.c new file +193 -0
193 lines not on this page · raw message
boards.cfg +1 -0
@@ -183,6 +183,7 @@ lwmon5 powerpc ppc4xx ML2 powerpc ppc4xx sbc405 powerpc ppc4xx sc3 powerpc ppc4xx +t3corp powerpc ppc4xx zeus powerpc ppc4xx acadia powerpc ppc4xx - amcc bamboo powerpc ppc4xx - amcc
include/configs/t3corp.h new file +544 -0
544 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v3 1/1 ppc4xx: Add T3COPR board support (PPC460GT based)
Quoted 2 lines · On Wednesday 30 June 2010 09:26:16 Stefan Roese wrote:
This patch adds support for the T3CORP board, based on the AppliedMicro (APM) PPC460GT.
Applied to u-boot-ppc4xx/master. Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de